You are not logged in.
- Topics: Active | Unanswered
#76 Re: Hardware & System Configuration » How to set system time? » 2026-07-09 11:59:22
Current default time zone: 'Europe/Rome'
Local time is now: Thu Jul 9 13:45:59 CEST 2026.
Universal Time is now: Thu Jul 9 11:45:59 UTC 2026.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
think the .reg file trick shared by Mr. RedGreen925 is very helpful;
it functioned on 1 computer that i use here quite reliably; however, it takes the windows machine about a half or minute or so to adjust; but otherwise it seem to function; but probably, it needs an internet connection to function.
where i live the UTC "universal" time seem not so much off, so i am not at odds with it;
very mjuch more so with the "current local time" which is affront, so calld "DST" "ora legale" "Sommerzeit" etc ~
basically in small room can get 3 different times depending on where i watch ~
TV gives me like 07.39 (UTC)
my smartwatch on wrist 08.39 (local-time) > since have the wrist-watch not synced for along time.
radio-clock in kitchen-space 09-39 (local-"summer"-time) > the stupid does "align" itself via radio probably
the local-time is most true to the sun since it probaly 15min ahead of loca-tun-time~
and UTC is probably 45min behind suntime ~
whereas the "summer-time" "day-light-saving-time" if full 75minutes "ahead" of sun and a real bummer so doing my best to ignore it ~ but since it is ~ "legal" time, well, not fully to ignore, but thats for another topic.
it would be nice to set the time in BIOS, and that could be it.
#77 Re: Hardware & System Configuration » Invalid PCI Header Signature error » 2026-07-09 07:03:27
its not much of an advice, but you could always try a fresh install,
see no reason why it should not function;
have an older laptop with "carrizo" or "kabini" based graphics and it still function with devuan 7.
sudo dmesg | grep amdgpu
[sudo] password for :
[ 15.624597] amdgpu: Virtual CRAT table created for CPU
[ 15.624676] amdgpu: Topology: Add CPU node
[ 15.625191] amdgpu 0000:00:01.0: initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x17AA:0x5120 0xC9).
[ 15.661524] amdgpu 0000:00:01.0: register mmio base: 0xF0F00000
[ 15.661532] amdgpu 0000:00:01.0: register mmio size: 262144
[ 15.662084] amdgpu 0000:00:01.0: detected ip block number 0 <common_v1_0_0> (vi_common)
[ 15.662095] amdgpu 0000:00:01.0: detected ip block number 1 <gmc_v8_0_0> (gmc_v8_0)
[ 15.662110] amdgpu 0000:00:01.0: detected ip block number 2 <ih_v3_0_0> (cz_ih)
[ 15.662114] amdgpu 0000:00:01.0: detected ip block number 3 <gfx_v8_0_0> (gfx_v8_0)
[ 15.662117] amdgpu 0000:00:01.0: detected ip block number 4 <sdma_v3_0_0> (sdma_v3_0)
[ 15.662120] amdgpu 0000:00:01.0: detected ip block number 5 <smu_v1_0_0> (powerplay)
[ 15.662123] amdgpu 0000:00:01.0: detected ip block number 6 <dce_v1_0_0> (dm)
[ 15.662126] amdgpu 0000:00:01.0: detected ip block number 7 <uvd_v6_0_0> (uvd_v6_0)
[ 15.662129] amdgpu 0000:00:01.0: detected ip block number 8 <vce_v3_1_0> (vce_v3_0)
[ 15.662132] amdgpu 0000:00:01.0: detected ip block number 9 <acp_v2_2_0> (acp_ip)
[ 15.674451] amdgpu 0000:00:01.0: Fetched VBIOS from ROM BAR
[ 15.674456] amdgpu 0000:00:01.0: [drm] ATOM BIOS: 113-C75100-031
[ 15.678025] amdgpu 0000:00:01.0: [drm] UVD is enabled in physical mode
[ 15.680078] amdgpu 0000:00:01.0: Found VCE firmware Version: 52.4 Binary ID: 3
[ 15.680087] amdgpu 0000:00:01.0: [drm] VCE enabled in physical mode
[ 15.680705] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[ 15.680710] amdgpu 0000:00:01.0: Trusted Memory Zone (TMZ) feature not supported
[ 15.680714] amdgpu 0000:00:01.0: PCIE atomic ops is not supported
[ 15.680764] amdgpu 0000:00:01.0: vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 15.680774] amdgpu 0000:00:01.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[ 15.680778] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 15.680793] amdgpu 0000:00:01.0: [drm] Detected VRAM RAM=1024M, BAR=1024M
[ 15.680796] amdgpu 0000:00:01.0: [drm] RAM width 128bits UNKNOWN
[ 15.681051] amdgpu 0000:00:01.0: 1024M of VRAM memory ready
[ 15.681056] amdgpu 0000:00:01.0: 7449M of GTT memory ready.
[ 15.681101] amdgpu 0000:00:01.0: [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 15.681666] amdgpu 0000:00:01.0: [drm] PCIE GART of 1024M enabled (table at 0x000000F400E00000).
[ 15.688241] amdgpu: hwmgr_sw_init smu backed is smu8_smu
[ 15.690399] amdgpu 0000:00:01.0: [drm] Found UVD firmware Version: 1.91 Family ID: 11
[ 15.690469] amdgpu 0000:00:01.0: [drm] UVD ENC is disabled
[ 15.693026] amdgpu: smu version 27.18.00
[ 15.699361] amdgpu 0000:00:01.0: [drm] Display Core v3.2.369 initialized on DCE 11.0
[ 15.713298] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 15.754619] amdgpu 0000:00:01.0: [drm] Using ACPI provided EDID for eDP-1
[ 15.785324] amdgpu 0000:00:01.0: [drm] UVD initialized successfully.
[ 15.984828] amdgpu 0000:00:01.0: [drm] VCE initialized successfully.
[ 15.985930] amdgpu 0000:00:01.0: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6
[ 15.987124] amdgpu: pp_dpm_get_sclk_od was not implemented.
[ 15.987128] amdgpu: pp_dpm_get_mclk_od was not implemented.
[ 15.987316] amdgpu 0000:00:01.0: Runtime PM not available
[ 15.996967] amdgpu 0000:00:01.0: [drm] Using custom brightness curve
[ 15.997483] amdgpu 0000:00:01.0: [drm] Registered 3 planes with drm panic
[ 16.016758] [drm] Initialized amdgpu 3.64.0 for 0000:00:01.0 on minor 0
[ 16.023676] fbcon: amdgpudrmfb (fb0) is primary device
[ 16.699733] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev c9) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 5120
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupts: pin B disabled, MSI(X) routed to IRQ 60
IOMMU group: 0
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at 2000 [size=256]
Region 5: Memory at f0f00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
00: 02 10 74 98 07 04 10 00 c9 00 00 03 08 00 80 00
10: 0c 00 00 e0 00 00 00 00 0c 00 00 f0 00 00 00 00
20: 01 20 00 00 00 00 f0 f0 00 00 00 00 aa 17 20 51
30: 00 00 fe ff 48 00 00 00 00 00 00 00 0b 01 00 00#78 Re: Other Issues » [SOLVED] Failed to check for processor microcode upgrades(x86_64) » 2026-07-08 20:26:12
for fairness sake,
this is a quite a newer computer, with cpu from amd
whereis amd64-microcode
amd64-microcode:
OPERATING SYSTEM: Linuxmint 22.3
Kernel: 6.17.0-35-generic (x86_64)
Display Server: X Server 1.21.1.11
Compiler: GCC 13.3.0
Security: gather_data_sampling: Not affected
+ ghostwrite: Not affected
+ indirect_target_selection: Not affected
+ itlb_multihit: Not affected
+ l1tf: Not affected
+ mds: Not affected
+ meltdown: Not affected
+ mmio_stale_data: Not affected
+ old_microcode: Not affected
+ reg_file_data_sampling: Not affected
+ retbleed: Not affected
+ spec_rstack_overflow: Mitigation of IBPB on VMEXIT only
+ spec_store_bypass: Mitigation of SSB disabled via prctl
+ spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization
+ spectre_v2: Mitigation of Enhanced / Automatic IBRS; IBPB: conditional; STIBP: always-on; PBRSB-eIBRS: Not affected; BHI: Not affected
+ srbds: Not affected
+ tsa: Not affected
+ tsx_async_abort: Not affected
+ vmscape: Mitigation of IBPB on VMEXIT not all software made easy.
#79 Re: Installation » [SOLVED] UMAX AstraSlim SE - Invalid argument » 2026-07-08 15:02:33
you still could try the "forever" trick
sudo apt-get remove ipp-usb
reboot, try again, have luck.
#80 Re: Other Issues » [SOLVED] Failed to check for processor microcode upgrades(x86_64) » 2026-07-07 19:52:50
sure , maybe the destroyer will let you know,
in the meantime, applied the "intel-microcode" , rebooted ;
small changes , but probably still inherently unsafe to run the said hardware /
OPERATING SYSTEM: Devuan 6
Kernel: 6.12.95+deb13-amd64 (x86_64)
Display Server: X Server 1.21.1.16
Compiler: GCC 14.2.0
Security: gather_data_sampling: Not affected
+ indirect_target_selection: Not affected
+ itlb_multihit: KVM: Mitigation of VMX unsupported
+ l1tf: Mitigation of PTE Inversion
+ mds: Mitigation of Clear buffers; SMT vulnerable
+ meltdown: Mitigation of PTI
+ mmio_stale_data: Unknown: No mitigations
+ reg_file_data_sampling: Not affected
+ retbleed: Not affected
+ spec_rstack_overflow: Not affected
+ spec_store_bypass: Mitigation of SSB disabled via prctl
+ spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization
+ spectre_v2: Mitigation of Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
+ srbds: Not affected
+ tsa: Not affected
+ tsx_async_abort: Not affected
+ vmscape: Mitigation of IBPB before exit userspace #81 Re: Other Issues » [SOLVED] Failed to check for processor microcode upgrades(x86_64) » 2026-07-07 13:36:37
funnily was about to post a similar topic than "destroyer"
have encountered this both on amd and intel computer, the software says
spec_store_bypass: Mitigation of SSB disabled via prctl
thought this might have caused myself since i had "secure boot" or similar in place, but disabled afterwards for some reason currently unknown.
here is the output for the intel computer; for amd it is similar;
OPERATING SYSTEM: Devuan 6
Kernel: 6.12.95+deb13-amd64 (x86_64)
Display Server: X Server 1.21.1.16
Compiler: GCC 14.2.0
Security: gather_data_sampling: Not affected
+ indirect_target_selection: Not affected
+ itlb_multihit: KVM: Mitigation of VMX unsupported
+ l1tf: Mitigation of PTE Inversion
+ mds: Vulnerable: Clear buffers attempted no microcode; SMT vulnerable
+ meltdown: Mitigation of PTI
+ mmio_stale_data: Unknown: No mitigations
+ reg_file_data_sampling: Not affected
+ retbleed: Not affected
+ spec_rstack_overflow: Not affected
[b]+ spec_store_bypass: Mitigation of SSB disabled via prctl [/b]
+ spectre_v1: Mitigation of usercopy/swapgs barriers and __user pointer sanitization
+ spectre_v2: Mitigation of Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
+ srbds: Not affected
+ tsa: Not affected
+ tsx_async_abort: Not affected
+ vmscape: Mitigation of IBPB before exit userspace #82 Re: Hardware & System Configuration » How to set system time? » 2026-07-02 18:00:19
i think the confusion stems also from the fact that during installation i set "language: englsish"
but i live somehwere else, and i am however constrained to select a region that has "english mapping" and hence everything goes tupsy turvy;
this is probably a limitating on the lclassic debian-inux installer.
#83 Re: Hardware & System Configuration » How to set system time? » 2026-07-02 15:15:12
would have to guess, but apparently i am able to mess up the time every other time i boot into windows and back , or so ~
there have been kind peopel on this forum who told me how to fix time with windows tricks ]
but those have tricks not lasted that long also use several computer , and what function on one, seem not always stable on another. . it has probably to do aswell with the computers itself; and maybe also language, regional settings may interfere?
maybe some day we can get to to the bottom of it.
#84 Re: Hardware & System Configuration » How to set system time? » 2026-07-02 14:42:10
sudo apt install ntpsec-ntpdate
is valid for devuan 6.0
sudo ntpdate-debian2026-07-02 16:39:31.356971 (+0200) +0.170255 +/- 0.010254 0.debian.pool.ntp.org 37.247.53.178 s2 no-leapbut with dual-boot windows + linux there is still woes, at least on computers that i use.
#85 Re: Hardware & System Configuration » [SOLVED] upgrade to Excalibure partly succesful » 2026-07-01 19:30:07
now i have install "dummy-logind" and it seemed to go through (tasksel > mate-desktop) however at the end there was still error
sudo apt upgrade
Summary:
Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0
2 not fully installed or removed.
Space needed: 0 B / 37.0 GB available
Continue? [Y/n]
dpkg: dependency problems prevent configuration of libpam-elogind:amd64:
libpam-elogind:i386 (255.17-2) breaks libpam-systemd and is unpacked but not co
nfigured.
libpam-elogind:amd64 (255.17-2) provides libpam-systemd.
dpkg: error processing package libpam-elogind:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpam-elogind:i386:
libpam-elogind:amd64 (255.17-2) breaks libpam-systemd and is unpacked but not c
onfigured.
libpam-elogind:i386 (255.17-2) provides libpam-systemd.
dpkg: error processing package libpam-elogind:i386 (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
libpam-elogind:amd64
libpam-elogind:i386
Error: Sub-process /usr/bin/dpkg returned an error code (1)afterwards
Summary:
Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0
14 not fully installed or removed.
Space needed: 0 B / 37.0 GB available
Continue? [Y/n]
dpkg: dependency problems prevent configuration of libpam-elogind:amd64:
libpam-elogind:i386 (255.17-2) breaks libpam-systemd and is installed.
libpam-elogind:amd64 (255.17-2) provides libpam-systemd.
dpkg: error processing package libpam-elogind:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of network-manager:
network-manager depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package network-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nm-connection-editor:
nm-connection-editor depends on network-manager; however:
Package network-manager is not configured yet.
dpkg: error processing package nm-connection-editor (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of network-manager-applet:
network-manager-applet depends on nm-connection-editor (= 1.36.0-3+b1); however
:
Package nm-connection-editor is not configured yet.
network-manager-applet depends on network-manager; however:
Package network-manager is not configured yet.
dpkg: error processing package network-manager-applet (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of udisks2:
udisks2 depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package udisks2 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gvfs-daemons:
gvfs-daemons depends on udisks2; however:
Package udisks2 is not configured yet.
dpkg: error processing package gvfs-daemons (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gvfs-backends:
gvfs-backends depends on gvfs-daemons (= 1.57.2-2+deb13u1); however:
Package gvfs-daemons is not configured yet.
dpkg: error processing package gvfs-backends (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gvfs:amd64:
gvfs:amd64 depends on gvfs-daemons (<< 1.57.2-2+deb13u1.1~); however:
Package gvfs-daemons is not configured yet.
gvfs:amd64 depends on gvfs-daemons (>= 1.57.2-2+deb13u1); however:
Package gvfs-daemons is not configured yet.
dpkg: error processing package gvfs:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of mate-desktop-environment-core
:
mate-desktop-environment-core depends on gvfs-backends; however:
Package gvfs-backends is not configured yet.
dpkg: error processing package mate-desktop-environment-core (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of caja:
caja depends on gvfs; however:
Package gvfs:amd64 is not configured yet.
dpkg: error processing package caja (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of mate-desktop-environment:
mate-desktop-environment depends on mate-desktop-environment-core (= 1.26.0+2);
however:
Package mate-desktop-environment-core is not configured yet.
dpkg: error processing package mate-desktop-environment (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of task-mate-desktop:
task-mate-desktop depends on mate-desktop-environment; however:
Package mate-desktop-environment is not configured yet.
dpkg: error processing package task-mate-desktop (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of gvfs-fuse:
gvfs-fuse depends on gvfs (= 1.57.2-2+deb13u1); however:
Package gvfs:amd64 is not configured yet.
dpkg: error processing package gvfs-fuse (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of mate-applets:
mate-applets depends on gvfs; however:
Package gvfs:amd64 is not configured yet.
dpkg: error processing package mate-applets (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
libpam-elogind:amd64
network-manager
nm-connection-editor
network-manager-applet
udisks2
gvfs-daemons
gvfs-backends
gvfs:amd64
mate-desktop-environment-core
caja
mate-desktop-environment
task-mate-desktop
gvfs-fuse
mate-applets#86 Re: Hardware & System Configuration » [SOLVED] upgrade to Excalibure partly succesful » 2026-07-01 19:23:08
sudo apt install logind
Package logind is a virtual package provided by:
libpam-elogind 255.17-2
dummy-logind 255.17-2
You should explicitly select one to install.
Error: Package 'logind' has no installation candidatesudo apt install libpam-elogind
libpam-elogind is already the newest version (255.17-2).
libpam-elogind set to manually installed.
Summary:
Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0
7 not fully installed or removed.
Space needed: 0 B / 37.3 GB available
Continue? [Y/n]
dpkg: dependency problems prevent configuration of libpam-elogind:amd64:
libpam-elogind:i386 (255.17-2) breaks libpam-systemd and is installed.
libpam-elogind:amd64 (255.17-2) provides libpam-systemd.
dpkg: error processing package libpam-elogind:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of network-manager:
network-manager depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package network-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nm-connection-editor:
nm-connection-editor depends on network-manager; however:
Package network-manager is not configured yet.
dpkg: error processing package nm-connection-editor (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of network-manager-applet:
network-manager-applet depends on nm-connection-editor (= 1.36.0-3+b1); however
:
Package nm-connection-editor is not configured yet.
network-manager-applet depends on network-manager; however:
Package network-manager is not configured yet.
dpkg: error processing package network-manager-applet (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpolkit-qt5-1-1:amd64:
libpolkit-qt5-1-1:amd64 depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package libpolkit-qt5-1-1:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of udisks2:
udisks2 depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package udisks2 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of kdiskmark:
kdiskmark depends on libpolkit-qt5-1-1 (>= 0.112.0); however:
Package libpolkit-qt5-1-1:amd64 is not configured yet.
dpkg: error processing package kdiskmark (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
libpam-elogind:amd64
network-manager
nm-connection-editor
network-manager-applet
libpolkit-qt5-1-1:amd64
udisks2
kdiskmark
Error: Sub-process /usr/bin/dpkg returned an error code (1)#87 Hardware & System Configuration » [SOLVED] upgrade to Excalibure partly succesful » 2026-07-01 19:20:12
- kapqa
- Replies: 3
Hello ,
hvae updated another box to latest Devuan 6.0
this time however incurred some rrproblems, now there is string of errors and i am not
sure if it save to remove those packages.
the issue most likely arose after updating i did run "sudo tasksel" and let remove "cinnamon" and install "mate" instead;
the "xfce" was already installed and running;
now there are some error still
like
sudo apt -f install
Summary:
Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0
7 not fully installed or removed.
Space needed: 0 B / 37.3 GB available
dpkg: dependency problems prevent configuration of libpam-elogind:amd64:
libpam-elogind:i386 (255.17-2) breaks libpam-systemd and is installed.
libpam-elogind:amd64 (255.17-2) provides libpam-systemd.
dpkg: error processing package libpam-elogind:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of network-manager:
network-manager depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package network-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nm-connection-editor:
nm-connection-editor depends on network-manager; however:
Package network-manager is not configured yet.
dpkg: error processing package nm-connection-editor (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of network-manager-applet:
network-manager-applet depends on nm-connection-editor (= 1.36.0-3+b1); however
:
Package nm-connection-editor is not configured yet.
network-manager-applet depends on network-manager; however:
Package network-manager is not configured yet.
dpkg: error processing package network-manager-applet (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpolkit-qt5-1-1:amd64:
libpolkit-qt5-1-1:amd64 depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package libpolkit-qt5-1-1:amd64 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of udisks2:
udisks2 depends on default-logind | logind; however:
Package default-logind is not installed.
Package libpam-elogind:amd64 which provides default-logind is not configured y
et.
Package logind is not installed.
Package libpam-elogind:amd64 which provides logind is not configured yet.
dpkg: error processing package udisks2 (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of kdiskmark:
kdiskmark depends on libpolkit-qt5-1-1 (>= 0.112.0); however:
Package libpolkit-qt5-1-1:amd64 is not configured yet.
dpkg: error processing package kdiskmark (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
libpam-elogind:amd64
network-manager
nm-connection-editor
network-manager-applet
libpolkit-qt5-1-1:amd64
udisks2
kdiskmark
Error: Sub-process /usr/bin/dpkg returned an error code (1)is this "libpam-elogind:amd64" needed or ccan i safely remove§?have already removed the :i386 version of it or elogind only;
would like to clear up and continue with the OS since it function well;
thank you.
#88 Re: Hardware & System Configuration » [SOLVED] How remove Trash via terminal (324Kb needed / 0 Kb available) » 2026-06-30 12:35:50
thanks,
booted into windows and downloaded a trial of extfs for windows and saw that there are in fact already 8,76 something GB available to me;
booted back into Linux, back online, could boot into GUI.
more false alarm than a real calamity; glad could save a 50-60 euro for a bigger nvme (for now).
also, the windows 10 could receive another year of updates until october 2027, so the laptop could still be useful ( i like dual-boot).
sudo rm -rf ~/.local/share/Trash/*
was however needed to forcefully remove a file that "empthing trash via icon was not able to empty.
[¬fait accompli`~]
EDIT:
it seems there is still a bit confusion on the free space;
here it says / 9,022 MB available
Installing:
trash-cli
Summary:
Upgrading: 0, Installing: 1, Removing: 0, Not Upgrading: 182
Download size: 52.8 kB
Space needed: 324 kB / 9,022 MB available
Get:1 http://deb.devuan.org/merged freia/main amd64 trash-cli all 0.24.5.26-0.3 [52.8 kB]
Fetched 52.8 kB in 0s (108 kB/s)
Selecting previously unselected package trash-cli.
(Reading database… 571098 files and directories currently installed.)
Preparing to unpack …/trash-cli_0.24.5.26-0.3_all.deb…
Unpacking trash-cli (0.24.5.26-0.3)…
Setting up trash-cli (0.24.5.26-0.3)…
Processing triggers for man-db (2.13.1-1)…however, the kparted says there is more space?
#89 Re: Hardware & System Configuration » [SOLVED] How remove Trash via terminal (324Kb needed / 0 Kb available) » 2026-06-30 10:50:00
Thanks Altoid,
i don't think there is anything to resize, since do the "automaticl" installer most of times, which does 1 small EFI, 1 home-everything-else, 1 swap-1GB if rememeber correctly, but things might have changed in the meantime.
there was a suggestion to delete directories in trash via terminal in like in
rm -rf ~/.local/share/Trash/*
but there is no such directory; i use KDE on this laptop;
EDIt: on second thought, it sounds a good advice, i could bootinto gparted live and resize the swap or delete it; that could do the trick.
but hopefully such situation could be amended also otherwise?
#90 Hardware & System Configuration » [SOLVED] How remove Trash via terminal (324Kb needed / 0 Kb available) » 2026-06-30 10:12:53
- kapqa
- Replies: 4
Hello ,
have a small SSD on which sits Devuan Testing,
so far if function deceently, however am prone to download things and not always tidiing up in time;
now have run into impasse;
the OS complained running out of space (root is 0 Byte or similar), so i kept deleting things, kept emptying Trash; but it seemed to have made no effect;
now, thought that a reboot will probably clear up the space since have "deleted" quite some files;
but apparently it did not;
"Free" command still reports 0 swap;
and i am no longer able to login to GUI;
when i boot into recovery-mode; i am still deleting files, but apparently the situation does not change;
the remaining space is "0";
would kindly ask who i ccould empty the trash via terminal? if it is even still possible at this point;
tried to install "trash-cli" for "trash-empty" but it would not function, ince 324KB are not available;
it is a bit comical since i really did delete quite some files + also emptied the trashcan prior to rebooting; but apparently it was already too late since the root going down to 0 Byte or what? must have prevented things.
Would be glad if this could still be salvaged,
thanks.
#91 Re: Hardware & System Configuration » Sporadic network failure on wakeup after hibernation » 2026-06-29 19:51:22
hello rolfie,
i used this trick on a Optiplex that used to have not network manager after a software update ~
this has functioned reliably, glad i found it.
sudo dhclient -r eth0
sudo dhclient eth0#92 Re: Packaging for Devuan » unable to run photoqt » 2026-06-26 21:19:31
it may very well be that the version of "testing" is still exhibiting the behaviour;
i am not sure what software version the laptop has since it is getting always updates, so it must be mix propablyzy
of devuan 7 and or/sid.
photoqt --version
PhotoQt 5.3
2026-06-26 23:12:18.945 [W] ::::0: QThreadStorage: entry 2 destroyed before end of thread 0x55ddabe49710
2026-06-26 23:12:18.945 [W] ::::0: QThreadStorage: entry 1 destroyed before end of thread 0x55ddabe49710
this aligns with "next-testing" and "testing" from the reportbug-window in gui-mode.
have included reference to the 3 packages, but the rest is up to the responsible persones.
if the program is included int the repos, it should be able to run - no questions asked - that is maybe universally agreeable.
thank you again for letting know of the program and proposing a "fix".
#93 Re: Packaging for Devuan » unable to run photoqt » 2026-06-26 08:08:06
the rpgram seems to exhibit similar behaviour on linuux mint 22.3
[not starting]
kimageformat-plugins 5.115.0-0ubuntu7 217 KB
libaec0 1.1.2-1build1 23 KB
liballegro4.4t64 2:4.4.3.1-4.1build3 415 KB
libavif16 1.0.4-1ubuntu3 91 KB
libcfitsio10t64 4.3.1-1.1build2 528 KB
libcgif0 0.3.2-1build1 11 KB
libdevil1c2 1.7.8-10build6 226 KB
libfreeimage3 3.18.0+ds2-10build4 297 KB
libgav1-1 0.18.0-1build3 357 KB
libhdf5-103-1t64 1.10.10+repack-3.1ubuntu4 1.3 MB
libheif-plugin-x265 1.17.6-1ubuntu4.4 17 KB
libkf5archive-data 5.115.0-0ubuntu5 51 KB
libkf5archive5 5.115.0-0ubuntu5 97 KB
libmagick++-6.q16-9t64 8:6.9.12.98+dfsg1-5.2build2 148 KB
libmatio11 1.5.26-1build3 119 KB
libopenslide0 3.4.1+dfsg-7build2 87 KB
libpoppler-qt6-3t64 24.02.0-1ubuntu9.9 175 KB
libqt6multimedia6 6.4.2-11build3 527 KB
libqt6multimediaquick6 6.4.2-11build3 66 KB
libqt6printsupport6t64 6.4.2+dfsg-21.1build5 222 KB
libqt6qmllocalstorage6 6.4.2+dfsg-4build3 27 KB
libqt6quicktemplates2-6 6.4.2+dfsg-4build3 591 KB
libspng0 0.7.4-1build1 34 KB
libsz2 1.1.2-1build1 5 KB
libvips42t64 8.15.1-1.1build4 1.3 MB
libyuv0 0.0~git202401110.af6ac82-1 178 KB
photoqt 4.4+ds-1 1.8 MB
python3-protobuf 3.21.12-8.2ubuntu0.3 200 KB
python3-pychromecast 9.4.0-2 52 KB
python3-zeroconf 0.131.0-1 80 KB
qml6-module-qt-labs-platform 6.4.2+dfsg-4build3 106 KB
qml6-module-qtmultimedia 6.4.2-11build3 17 KB
qml6-module-qtquick 6.4.2+dfsg-4build3 49 KB
qml6-module-qtquick-localstorage 6.4.2+dfsg-4build3 13 KB
====================================================================================================================
Suggested, Will Not Be Installed
====================================================================================================================
Package: Version: Size:
nip2 8.9.1-1build3 4.8 MB what is more ,
qml6-module-qtquick-effects
is not present in linux mint, so the "repair-trick" is not effective for this ubuntu distribution.
only installing 2 of the 3 promoted additional packages does not solve the issue [program not starting]
photoqt
2026-06-26 10:10:32.619 [D] pqc_singleinstance.cpp::void PQCSingleInstance::handleMessage(QString)::225: args: msg = ""
2026-06-26 10:10:32.619 [D] pqc_startup.cpp::int PQCStartup::check()::42:
2026-06-26 10:10:32.619 [D] pqc_settings.cpp::int PQCSettings::migrate(QString)::377: args: oldversion = ""
2026-06-26 10:10:32.619 [D] pqc_settings.cpp::int PQCSettings::migrate(QString)::396: migrating from version "" to 4.4
2026-06-26 10:10:32.619 [C] pqc_settings.cpp::int PQCSettings::migrate(QString)::421: WARNING: The current version number needs to be added to the migrate() functions
2026-06-26 10:10:32.619 [D] pqc_settings.cpp::void PQCSettings::readDB()::136:
2026-06-26 10:10:32.631 [D] pqc_shortcuts.cpp::void PQCShortcuts::readDB()::230:
2026-06-26 10:10:32.631 [D] pqc_shortcuts.cpp::bool PQCShortcuts::migrate(QString)::414: args: oldversion = ""
2026-06-26 10:10:32.631 [C] pqc_shortcuts.cpp::bool PQCShortcuts::migrate(QString)::431: WARNING: The current version number needs to be added to the migrate() functions
PhotoQt v4.4
> Validating configuration...
2026-06-26 10:10:32.643 [D] pqc_settings.cpp::void PQCSettings::closeDatabase()::347:
2026-06-26 10:10:32.647 [W] pqc_validate.cpp::bool PQCValidate::validateSettingsDatabase()::589: Error copying default db to tmp file
2026-06-26 10:10:32.647 [W] pqc_validate.cpp::bool PQCValidate::validateSettingsDatabase()::595: Error opening default database: "unable to open database file Error opening database"
2026-06-26 10:10:32.647 [W] ::::0: QSqlQuery::exec: database not open
2026-06-26 10:10:32.647 [W] pqc_validate.cpp::bool PQCValidate::validateSettingsDatabase()::602: Error getting list of tables: "No query Unable to fetch row"
>> Failed: settings db
2026-06-26 10:10:32.660 [W] pqc_validate.cpp::bool PQCValidate::validateImageFormatsDatabase()::286: Error copying default db to tmp file
2026-06-26 10:10:32.660 [W] pqc_validate.cpp::bool PQCValidate::validateImageFormatsDatabase()::292: Error opening default database: "unable to open database file Error opening database"
2026-06-26 10:10:32.660 [W] ::::0: QSqlQuery::prepare: database not open
2026-06-26 10:10:32.660 [W] pqc_validate.cpp::bool PQCValidate::validateImageFormatsDatabase()::299: Error getting default columns: "No query Unable to fetch row"
>> Failed: imageformats db
2026-06-26 10:10:32.662 [W] pqc_validate.cpp::bool PQCValidate::validateSettingsValues()::854: Error opening default database: "unable to open database file Error opening database"
2026-06-26 10:10:32.662 [W] ::::0: QSqlQuery::prepare: database not open
2026-06-26 10:10:32.662 [W] pqc_validate.cpp::bool PQCValidate::validateSettingsValues()::860: Error getting default data: "No query Unable to fetch row"
>> Failed: settings values
2026-06-26 10:10:32.662 [D] pqc_settings.cpp::void PQCSettings::reopenDatabase()::364:
>> Done!
2026-06-26 10:10:32.662 [D] pqc_settings.cpp::void PQCSettings::saveChangedValue(const QString&, const QVariant&)::220: args: key = "generalVersion"
2026-06-26 10:10:32.662 [D] pqc_settings.cpp::void PQCSettings::saveChangedValue(const QString&, const QVariant&)::221: args: value = QVariant(QString, "4.4")
2026-06-26 10:10:32.662 [D] pqc_settings.cpp::void PQCSettings::saveChangedValue(const QString&, const QVariant&)::222: readonly = false
2026-06-26 10:10:32.662 [D] pqc_settings.cpp::void PQCSettings::readDB()::136:
2026-06-26 10:10:32.662 [D] pqc_scriptsother.cpp::bool PQCScriptsOther::takeScreenshots()::49:
2026-06-26 10:10:32.728 [D] pqc_imageformats.cpp::void PQCImageFormats::readFromDatabase()::104:
2026-06-26 10:10:32.743 [W] ::::0: QQmlApplicationEngine failed to load component
2026-06-26 10:10:32.743 [W] PQMainWindow.qml::::4294967295: qrc:/src/qml/PQMainWindow.qml: module "QtQml.WorkerScript" is not installed
2026-06-26 10:10:32.743 [W] PQMainWindow.qml::::4294967295: qrc:/src/qml/PQMainWindow.qml: module "QtQml.WorkerScript" is not installed
2026-06-26 10:10:32.743 [W] PQMainWindow.qml::::4294967295: qrc:/src/qml/PQMainWindow.qml: module "QtQml.WorkerScript" is not installed
2026-06-26 10:10:32.743 [W] PQMainWindow.qml::::4294967295: qrc:/src/qml/PQMainWindow.qml: module "QtQml.WorkerScript" is not installed
2026-06-26 10:10:32.748 [D] pqc_scriptschromecast.cpp::bool PQCScriptsChromeCast::disconnect()::268: ubuntu-bug photoqt
*** Collecting problem information
The collected information can be sent to the developers to improve the
application. This might take a few minutes.
..................*** Problem in photoqt
The problem cannot be reported:
This does not seem to be an official Linux package. Please retry after updating the indexes of available packages, if that does not work then remove related third party packages and try again.
Press any key to continue...
maybe the issue is already covered, but only for the next releases of debian - ubuntu - devuan?
reportbug sent; for waht its word.
#94 Re: Packaging for Devuan » unable to run photoqt » 2026-06-25 11:22:27
Good job, thanks!
the last one recommend enable the app functionaly for me too on MAte ~
on Devuan 6 the wollong dependencies are pulled
Installing:
photoqt
Installing dependencies:
ffmpeg libqt6quicktemplates2-6
kimageformat-plugins libqt6sql6
libaec0 libqt6sql6-sqlite
libavdevice61 libqt6widgets6
libcgif0 libsdl1.2debian
libdevil1c2 libsixel1
libdisplay-info2 libsndio7.0
libfreeimage3 libspng0
libhdf5-310 libsz2
libkf5archive-data libvips42t64
libkf5archive5 python3-ifaddr
libmagick++-7.q16-5 python3-mutagen
libmatio13 python3-pychromecast
libmng1 python3-pycryptodome
libmpv2 python3-websockets
libmujs3 python3-zeroconf
libopenslide0 qml6-module-qt-labs-platform
libpoppler-qt6-3t64 qml6-module-qtmultimedia
libpugixml1v5 qml6-module-qtquick-localstorage
libqt6labsplatform6 qml6-module-qtquick-templates
libqt6multimedia6 yt-dlp
libqt6printsupport6since i have installed yt-dlp manually had installed without recommends, this could have been the cause for a non-functional install.
sudo apt install qml6-module-qtquick-effects photoqt --no-install-recommends
qml6-module-qtquick-effects is already the newest version (6.8.2+dfsg-7).
Installing:
photoqt
Installing dependencies:
libaec0 libqt6printsupport6
libavdevice61 libqt6quicktemplates2-6
libcgif0 libqt6sql6
libdevil1c2 libqt6widgets6
libdisplay-info2 libsdl1.2debian
libfreeimage3 libsixel1
libhdf5-310 libsndio7.0
libmagick++-7.q16-5 libspng0
libmatio13 libsz2
libmng1 libvips42t64
libmpv2 python3-ifaddr
libmujs3 python3-pychromecast
libopenslide0 python3-zeroconf
libpoppler-qt6-3t64 qml6-module-qt-labs-platform
libpugixml1v5 qml6-module-qtmultimedia
libqt6labsplatform6 qml6-module-qtquick-localstorage
libqt6multimedia6 qml6-module-qtquick-templates
Suggested packages:
sndiod nip2
Recommended packages:
yt-dlp | libqt6sql6-odbc kimageformat-plugins
libqt6sql6-sqlite | libqt6sql6-psql
| libqt6sql6-mysql | libqt6sql6-ibase#95 Re: Packaging for Devuan » unable to run photoqt » 2026-06-24 09:02:41
it functions on devuan 7 with kde, it seems a handy app.
on devuan 6 with mate, there is probably missing some functionality?
it would open up, but there is not possible to open files - the screen would not respond to mouse commands.
like errors
photoqt
2026-06-24 10:58:32.285 [D] pqc_singleinstance.cpp::void PQCSingleInstance::handleMessage(QString)::228: args: msg = ""
2026-06-24 10:58:32.285 [D] pqc_startup.cpp::int PQCStartup::check()::42:
2026-06-24 10:58:32.285 [D] pqc_scriptsother.cpp::bool PQCScriptsOther::takeScreenshots()::50:
2026-06-24 10:58:32.321 [D] pqc_imageformats.cpp::void PQCImageFormats::readFromDatabase()::104:
2026-06-24 10:58:32.341 [D] pqc_settings.cpp::void PQCSettings::readDB()::136:
2026-06-24 10:58:32.358 [D] pqc_shortcuts.cpp::void PQCShortcuts::readDB()::230:
2026-06-24 10:58:32.460 [D] pqc_scriptscontextmenu.cpp::QVariantList PQCScriptsContextMenu::getEntries()::61:
2026-06-24 10:58:32.467 [D] pqc_scriptsconfig.cpp::void PQCScriptsConfig::updateTranslation()::563:
2026-06-24 10:58:32.467 [W] ::::0: qrc:/src/qml/PQMainWindow.qml:93:5 Parameter "visibility" is not declared. Injection of parameters into signal handlers is deprecated. Use JavaScript functions with formal parameters instead.
2026-06-24 10:58:32.471 [W] PQMainMenu.qml::::119: qrc:/src/qml/ongoing/PQMainMenu.qml:119:5: Type PQBlurBackground unavailable
2026-06-24 10:58:32.471 [W] PQBlurBackground.qml::::28: qrc:/src/qml/elements/PQBlurBackground.qml:28:1: module "QtQuick.Effects" is not installed
2026-06-24 10:58:32.471 [W] PQMetaData.qml::::114: qrc:/src/qml/ongoing/PQMetaData.qml:114:5: Type PQBlurBackground unavailable
2026-06-24 10:58:32.471 [W] PQBlurBackground.qml::::28: qrc:/src/qml/elements/PQBlurBackground.qml:28:1: module "QtQuick.Effects" is not installed
2026-06-24 10:58:32.478 [W] PQStatusInfo.qml::::66: qrc:/src/qml/ongoing/PQStatusInfo.qml:66:5: Type PQShadowEffect unavailable
2026-06-24 10:58:32.478 [W] PQShadowEffect.qml::::25: qrc:/src/qml/elements/PQShadowEffect.qml:25:1: Type PQMultiEffect unavailable
2026-06-24 10:58:32.478 [W] PQMultiEffect.qml::::23: qrc:/src/qml/elements/PQMultiEffect.qml:23:1: module "QtQuick.Effects" is not installed
2026-06-24 10:58:32.478 [W] PQThumbnails.qml::::80: qrc:/src/qml/ongoing/PQThumbnails.qml:80:5: Type PQBlurBackground unavailable
2026-06-24 10:58:32.478 [W] PQBlurBackground.qml::::28: qrc:/src/qml/elements/PQBlurBackground.qml:28:1: module "QtQuick.Effects" is not installed
2026-06-24 10:58:34.740 [W] PQFileDialog.qml::::140: qrc:/src/qml/filedialog/PQFileDialog.qml:140:9: Type PQFileView unavailable
2026-06-24 10:58:34.740 [W] PQFileView.qml::::183: qrc:/src/qml/filedialog/PQFileView.qml:183:5: Type PQPreview unavailable
2026-06-24 10:58:34.740 [W] PQPreview.qml::::87: qrc:/src/qml/filedialog/PQPreview.qml:87:5: Type PQMultiEffect unavailable
2026-06-24 10:58:34.740 [W] PQMultiEffect.qml::::23: qrc:/src/qml/elements/PQMultiEffect.qml:23:1: module "QtQuick.Effects" is not installed#96 Re: Freedom Hacks » The Absurdist Comedy » 2026-06-23 18:41:38
thanks, really comofrtable, should be nice feature.
hae however built according to your instructions, but sadly with patch 1 & 2 error (not your fault);
will the resulting "firefox-dev-ed_154.0a1-1_amd64" be blemished forever? are those patches needed?
#97 Re: Freedom Hacks » The Absurdist Comedy » 2026-06-19 17:55:22
thanks, i am not needing zoom atm, but might later one and will test.
have not understood your patches, but can hopefully adapt to it.
what does it mean "firefox developer edition is being updated by another instance"?
does the firefox develper auto-update?
#98 Re: ARM Builds » excalibur image pine a64+ - no boot loader installed » 2026-06-19 15:52:58
thanks for your reply,
dont know why but the older image chimaera or similar older
got installed and proceeded to update from there,
posted sometime at pine forum , but thought this more devuan related, glad it could function, it is very minimal image.
(but have switched since to armbian pmce more)
#99 Re: Freedom Hacks » The Absurdist Comedy » 2026-06-19 14:23:48
thank you,
patch 1 & 2 gave error (with 2.39.5 at line 22 & 23 respectively) , but the build went through ~
very pleased!!!
you made browsing a lot more pleasant ~ think if ever there be an devuan award, it should go söso
toyou!
154.0a1 (2026-06-19) (64-bit)
#100 Re: Desktop and Multimedia » [SOLVED] Spectacle app not opening » 2026-06-19 11:52:23
it could be solved by installing
libfdk-aac2t64problem solved, thanks.
Board footer
