The officially official Devuan Forum!

You are not logged in.

#1 Yesterday 20:42:53

sun skin only
Member
Registered: Yesterday
Posts: 5  

Also UEFI install problems

Hi

Hardware:
mb: msi h97 gaming 3
cpu: intel i7 4970
gpu: msi nvidia 1050 ti

Having the same problem as Areulos with Daedalus 5.0.1 uefi install. Mbr/bios install loads fine

Net-install uefi doesn't boot,just goes to black screen after being selected in boot menu and hangs
Desk-install uefi seems to work but i'm having x-server fails to start but i'll look into that later.

Used to run Daedalus 5.0.0 uefi and installed debian uefi (using now) with everything booting normally

Bios doesn't show a secure boot option and idk how to get it to show.

Using uefi+legacy

used rufus and gdisk+dd,both formatted for gpt

Offline

#2 Yesterday 20:51:22

g4sra
Member
Registered: 2018-12-12
Posts: 40  

Re: Also UEFI install problems

In computing terms that motherboard is ancient and likely does not support TPM.
Check the motherboard manual and check your firmware is the latest.

Offline

#3 Yesterday 21:03:56

sun skin only
Member
Registered: Yesterday
Posts: 5  

Re: Also UEFI install problems

Ancient or not something once worked and now doesn't,especially since devuan is a debian fork and the latest debian works fine unless i'm missing something
Also it supports tpm since it has a connector for the module.
Updated firmware already and still didn't work.

Offline

#4 Yesterday 21:07:44

g4sra
Member
Registered: 2018-12-12
Posts: 40  

Re: Also UEFI install problems

it supports tpm since it has a connector for the module

Do you have a module plugged in ?

The installation media will install itself in the same mode that it is booted in.
Turning off Legacy is one way to ensure it boots and install in UEFI.

Offline

#5 Yesterday 21:17:13

sun skin only
Member
Registered: Yesterday
Posts: 5  

Re: Also UEFI install problems

Do you have a module plugged in ?

Not sure,don't know what one looks like,need to check the board display in bios.

Turning off Legacy is one way to ensure it boots and install in UEFI.

Tried and didn't help. Changed to defaults and defaults has uefi/bios. Also i installed Devuan 5.0.0 using those settings.

What can could cause 5.0.1 not to work when 5.0.0 worked?

Offline

#6 Yesterday 21:24:42

g4sra
Member
Registered: 2018-12-12
Posts: 40  

Re: Also UEFI install problems

I have never had any different issues booting\installing between 5.0.0 and 5.0.1 installation media.
Just use 5.0.0 and dist-upgrade or full-upgrade to 5.0.1

Sorry, can't help further.

Offline

#7 Yesterday 21:31:30

sun skin only
Member
Registered: Yesterday
Posts: 5  

Re: Also UEFI install problems

Could be something related to older hardware that they might have changed since the OP has a similar problem...

5.0.0 net and desk installs are gone but live installs are still 5.0.0 so i could use that...

Anyways thanx for your help.

Offline

#8 Yesterday 23:05:50

ralph.ronnquist
Administrator
From: Battery Point, Tasmania, AUS
Registered: 2016-11-30
Posts: 1,481  

Re: Also UEFI install problems

@sun skin only, you got your own thread. If you want to pursue any one of the range of issues you voice (or maybe all at once), you may continue on this thread.

Online

#9 Today 00:39:42

golinux
Administrator
Registered: 2016-11-25
Posts: 3,547  

Re: Also UEFI install problems

I thought I was seeing double! LOL!

Online

Board footer