The officially official Devuan Forum!

You are not logged in.

#26 2020-09-29 18:10:49

tuxd3v
Member
Registered: 2019-11-14
Posts: 183  

Re: Installer images for armel, armhf and ppc64 need testing

joril wrote:

I see, kernel recompilation then, no prebuilt packages... I'll try, thanks! smile

You can build your own packages,
Maybe C0rnelious,or MetaYan or ShorTie could help you, since they work more with raspberrypi's?

copy your .config file to the kernel folder, then you can explore and even make your own kernels, with the option make deb-pkg.

Also you can check this thread, for a rpi builder.., see the last comment:
https://dev1galaxy.org/viewtopic.php?id=3209&p=4

Last edited by tuxd3v (2020-09-29 18:11:43)


Best Regards,
tux

Offline

#27 2020-09-29 18:47:53

joril
Member
From: Italy
Registered: 2017-04-15
Posts: 44  

Re: Installer images for armel, armhf and ppc64 need testing

tuxd3v wrote:

copy your .config file to the kernel folder, then you can explore and even make your own kernels, with the option make deb-pkg.

Great, thanks again smile

Offline

#28 2020-10-15 17:20:00

nEon
Member
Registered: 2020-10-15
Posts: 5  

Re: Installer images for armel, armhf and ppc64 need testing

banana pro + devuan armhf = OK smile thanks

Offline

#29 2021-03-05 07:36:40

vortex
Member
Registered: 2020-11-12
Posts: 14  

Re: Installer images for armel, armhf and ppc64 need testing

Devuan Beowulf 3.1.0 Raspberry Pi SD card images tuned for RPi specific hardware variants have been added to https://arm-files.devuan.org/ for testing. Please refer to the updated README.txt for test image details.

Offline

#30 2021-03-05 07:40:45

joril
Member
From: Italy
Registered: 2017-04-15
Posts: 44  

Re: Installer images for armel, armhf and ppc64 need testing

vortex wrote:

Devuan Beowulf 3.1.0 Raspberry Pi SD card images tuned for RPi specific hardware variants have been added to https://arm-files.devuan.org/ for testing. Please refer to the updated README.txt for test image details.

Great news! Thanks smile

Offline

#31 2021-03-06 03:24:14

tuxd3v
Member
Registered: 2019-11-14
Posts: 183  

Re: Installer images for armel, armhf and ppc64 need testing

Good news! smile


Best Regards,
tux

Offline

#32 2021-03-10 11:03:19

Camtaf
Member
Registered: 2019-11-19
Posts: 440  

Re: Installer images for armel, armhf and ppc64 need testing

vortex wrote:

Devuan Beowulf 3.1.0 Raspberry Pi SD card images tuned for RPi specific hardware variants have been added to https://arm-files.devuan.org/ for testing. Please refer to the updated README.txt for test image details.

Excellent news!

I've just come back to Devuan, (normally use AntiX Base), but am looking for an alternative O/S for my RPi computers, so I will definitely be giving these a go, thanks. smile

Offline

#33 2021-03-26 14:47:57

Hobthrust
Member
Registered: 2021-03-26
Posts: 2  

Re: Installer images for armel, armhf and ppc64 need testing

vortex wrote:

Devuan Beowulf 3.1.0 Raspberry Pi SD card images tuned for RPi specific hardware variants have been added to https://arm-files.devuan.org/ for testing. Please refer to the updated README.txt for test image details.

Running perfectly on Pi 3b rev 1.2. Now in use as a wireless access point!

Offline

#34 2021-03-26 14:58:11

joril
Member
From: Italy
Registered: 2017-04-15
Posts: 44  

Re: Installer images for armel, armhf and ppc64 need testing

Hobthrust wrote:

Running perfectly on Pi 3b rev 1.2

Just installed on a 3b rev 1.2 too smile

Offline

#35 2021-03-28 02:04:15

Hobthrust
Member
Registered: 2021-03-26
Posts: 2  

Re: Installer images for armel, armhf and ppc64 need testing

joril wrote:
Hobthrust wrote:

Running perfectly on Pi 3b rev 1.2

Just installed on a 3b rev 1.2 too smile

Nice! I've got Pi-Hole running now too, no problems at all.

Offline

#36 2021-04-08 19:16:10

Florent
Member
Registered: 2021-04-08
Posts: 3  

Re: Installer images for armel, armhf and ppc64 need testing

Hi everyone,

Flashed the folllowing image on an SD card and launched.
devuan_beowulf_3.1.0_arm64_rpi4.img
The install starts, but I get stucked after one minute with a login and password prompt:
"BCM2711 login"
Cannot find the solution in the README.txt file. Made a quick search on google but could not find anything.

Would you happen to know what I am missing or a step I might have overlooked?

Offline

#37 2021-04-08 19:27:20

golinux
Administrator
Registered: 2016-11-25
Posts: 3,338  

Re: Installer images for armel, armhf and ppc64 need testing

I believe that the answer is in this README.

Online

#38 2021-04-09 09:57:42

Florent
Member
Registered: 2021-04-08
Posts: 3  

Re: Installer images for armel, armhf and ppc64 need testing

Hi Golinux!

Thank you very much for your attention and help! smile

Are you referring to the following paragraph?

'The devices should startup a openssh-server, but you won't be able to login directly over ssh, as root user..
Instead, login as devuan user, and change then to root, by issuing:
'sudo su -' and typing your *devuan* password

Beowulf 3.0.0 credentials:
    devuan:'devuan'
    root  :'toor'

Beowulf 3.1.0 credentials (rpi-img-builder based):
    pi:'board' (with passwordless SUDO :-O )'

Here is what the screen displays at the step I cannot go through:

--------

Devuan GNU/Linux 3 bcn2711 tty1

bcm2711 login:
Password:

--------

After the 'bcm2711 login:' and 'Password:' command prompts, I have been trying various combinations of logins and passwords but am still getting 'Login incorrect' as a result. Am I supposed to key 'bcm2711'? 'sudo su - board'? Or 'sudo su - bcm2711'? Is the password supposed to be void?

Sorry if my question sounds 'noobish' and I certainly do not mean to waste your time. Thanks again and in advance, for your support.

Offline

#39 2021-04-09 10:27:40

c0rnelius
Member
Registered: 2020-06-13
Posts: 51  

Re: Installer images for armel, armhf and ppc64 need testing

Florent wrote:

Hi everyone,

Flashed the folllowing image on an SD card and launched.
devuan_beowulf_3.1.0_arm64_rpi4.img
The install starts, but I get stucked after one minute with a login and password prompt:
"BCM2711 login"
Cannot find the solution in the README.txt file. Made a quick search on google but could not find anything.

Would you happen to know what I am missing or a step I might have overlooked?

Should be:
username: pi
password: board

As for sudo, it's setup so that you do not need to input a password to execute sudo.
You can find more information about the base image here: https://github.com/pyavitz/rpi-img-buil … tag/images

Offline

#40 2021-04-09 11:35:59

Florent
Member
Registered: 2021-04-08
Posts: 3  

Re: Installer images for armel, armhf and ppc64 need testing

C0rnelius, thank you very much for your precious help!

Offline

#41 2021-04-19 18:31:46

Rpisp
Member
Registered: 2021-04-19
Posts: 30  

Re: Installer images for armel, armhf and ppc64 need testing

To the person who said unerbootin was not available and asked for another tool.

If the following commands are available:
git
make

You can use git copy to copy the rpi-imager from githib and make / make install it

Then just select other iso instead of downloading in app

Select your iso and sd card and write.

Rpi-imager git command:

git copy https://github.com/raspberrypi/rpi-imager

There are tons of tips on make / make install all over the internet

Good luck

Offline

#42 2021-04-26 07:36:35

zen253230
Member
Registered: 2021-04-26
Posts: 8  

Re: Installer images for armel, armhf and ppc64 need testing

Sorry to ask the question !
but I tried at least twenty times to login on Rpi2 image with
login/password = pi/board
And I can swear it doesn't work after checking caps lock, input language,...!
any hint about where I could be wrong, please ?

Offline

#43 2021-04-26 14:15:44

c0rnelius
Member
Registered: 2020-06-13
Posts: 51  

Re: Installer images for armel, armhf and ppc64 need testing

zen253230 wrote:

Sorry to ask the question !
but I tried at least twenty times to login on Rpi2 image with
login/password = pi/board
And I can swear it doesn't work after checking caps lock, input language,...!
any hint about where I could be wrong, please ?

Try this one: https://github.com/pyavitz/rpi-img-buil … -26.img.xz

The name of the img is misleading, as it will actually boot both the Raspberry Pi 2 and 3.
More information on the img and options can be found here: https://github.com/pyavitz/rpi-img-buil … tag/images

Offline

#44 2021-04-26 14:54:48

zen253230
Member
Registered: 2021-04-26
Posts: 8  

Re: Installer images for armel, armhf and ppc64 need testing

Thanks you very much for your quick answer !
It now works...

Offline

#45 2021-06-13 08:43:26

markosc
Member
Registered: 2021-06-13
Posts: 2  

Re: Installer images for armel, armhf and ppc64 need testing

Please will it be possible to compile for RK3229 (img) ?
https://github.com/jhswartz/rk3229

Last edited by markosc (2021-06-13 08:43:37)

Offline

#46 2021-06-13 09:33:14

Camtaf
Member
Registered: 2019-11-19
Posts: 440  

Re: Installer images for armel, armhf and ppc64 need testing

devuan_beowulf_3.1.0_arm64_rpi3.img.zip            04-Mar-2021 22:44    576M
devuan_beowulf_3.1.0_arm64_rpi4.img.zip            04-Mar-2021 22:46    573M

Working well on my RPi3A+ / RPi3B+ // RPi4B / RPi400

Excellent work, thank you. smile

Last edited by Camtaf (2021-06-13 09:33:44)

Offline

#47 2021-07-08 21:58:46

tuxd3v
Member
Registered: 2019-11-14
Posts: 183  

Re: Installer images for armel, armhf and ppc64 need testing

markosc wrote:

Please will it be possible to compile for RK3229 (img) ?
https://github.com/jhswartz/rk3229

hello markosc,
What is your Idea, compile a kernel for some hardware?
it seems to be doable, but I don't really know about the device tree for your device..
What is your device?


Best Regards,
tux

Offline

#48 2021-07-13 04:54:17

markosc
Member
Registered: 2021-06-13
Posts: 2  

Re: Installer images for armel, armhf and ppc64 need testing

tuxd3v wrote:
markosc wrote:

Please will it be possible to compile for RK3229 (img) ?
https://github.com/jhswartz/rk3229

hello markosc,
What is your Idea, compile a kernel for some hardware?
it seems to be doable, but I don't really know about the device tree for your device..
What is your device?

basically have a devuan system image for "scishion" "v88 4k" android tv box with 1gb ram rockchip rk3229, but I could only find an ARMBIAN (debian buster) image https://www.armbian.com/rk322x-tv-box/ and discussion forum https://forum.armbian.com/topic/12656-c … -tv-boxes/ which has a kernel for the rockchip rk3229, I tried to transform from Debian to Devuan but the system in the end does not start.

Offline

#49 2021-10-25 23:49:46

att2
Member
Registered: 2021-10-24
Posts: 2  

Re: Installer images for armel, armhf and ppc64 need testing

Hello,
Can anyone tell me if it is possible to install Devuan on Odroid C4, including all hardware DTB's ?
I would need all serial lines and the RTC chip/addon board, the pcf8563. So the DTB overlays that I always used in Ubuntu, which is supported by Hardkernel, was "uart0 uart1 uart2 uart3 pcf8563".
Is this available for Devuan aswell ?  Please let me know.

Offline

#50 2021-10-26 19:51:33

c0rnelius
Member
Registered: 2020-06-13
Posts: 51  

Re: Installer images for armel, armhf and ppc64 need testing

Is it possible to install Devuan on a Odroid C4 and use the tobetter kernel source which includes the overlays, yes. But I don't see all the overlays you are asking about?

ls /usr/lib/meson*/amlogic/overlays/odroidc4
hifishield2.dtbo  hktft35.dtbo  spi0.dtbo         w1-gpio_p15.dtbo
hktft32.dtbo      pcf8563.dtbo  sx865x-i2c1.dtbo  w1-gpio_p22.dtbo

Also the current imgs I build use extlinux and although it does have overlay support now, I have personally never tried to use it.

Offline

Board footer