[NEW]-FluXuan Linux-[RELEASE]

golinux · 2018-05-17 15:37:41

wdq wrote:

Thank you so very much golinux for the find ... and kind words . . .

Actually Miyo found that! Keep up the good work!!

mchasard · 2018-05-23 20:25:43

hi i'm new to fluxuan ...

i have a trouble to mount usb key or optical disk when i use the user i create at begining .... i can only mount when i open a root session

please how could i get right to mount the device as my current user ?

Thanks in advance

wdq · 2018-05-24 05:15:50

mchasard wrote:

hi i'm new to fluxuan ...
i have a trouble to mount usb key or optical disk when i use the user i create at begining .... i can only mount when i open a root session
please how could i get right to mount the device as my current user ?
Thanks in advance

mkdir /media/usb

and according to your removable drive block name in /dev so you can see that you can use fdisk -l
usually that happens because you formatted or created the partitions on the drive as root so

mount /dev/sdb1 /media/usb

and if requires permissions use sudo if you set that up at installation

sudo mount /dev/sdb1 /media/usb - /dev/sdb1 is an example you can see your drive with fdisk -l

BTW 2 more days to next release , that will have a lot of bugs fixed and will use a lot less resources .

Last edited by wdq (2018-05-24 05:17:49)

darry1966 · 2018-07-17 07:29:31

Hi WDQ,

First up thank you for this nice little distro. I am running this on a Dell D620.

Only issue I struck was getting my Iwl3945 to work and I could not mount usb flash drives. Finally figured how to do that from command line and was able to install the firmware from that - other than that very nice will probably be a keeper. :

wdq · 2018-07-25 15:39:12

Darry1966 first i am sorry for a late answer i have been in a long nice Holiday , just got back to a really hot weather here in the UK , to help you a little bit related to your problems related to mounting
apt-get install udevil it will mount them automatically for you and i see that you figured out with the drivers , i will make sure to add the drivers in my net release witch is finished but i was in holiday and could not polish everything.

Thank you for using FluXuan.

jeffreyC · 2018-12-01 16:20:12

Well if no one else will do it I will ask for a 64 bit version, please.

Yes, the computer I plan to put it on will handle more bling, but I want speed not bloat.

Cosque · 2019-01-06 23:49:05

Hello, thanks for this fantastic distribution.
The wireless network does not work with the Intel 3160 chip, any ideas to make it work? thanks for your time!

wdq · 2019-01-14 09:42:32

Cosque wrote:

Hello, thanks for this fantastic distribution.
The wireless network does not work with the Intel 3160 chip, any ideas to make it work? thanks for your time!

Cosque thank you so much for your interest in my little work for some time now i strugle to the second release that i want to be more faster and available for some other laptops that are way more older but the answer to your question and driver is simple as

copy paste that in a terminal

apt-get update && apt-get install firmware-iwlwifi

and you could do a reboot after , enjoy ..

wdq · 2019-01-14 09:44:31

jeffreyC wrote:

Well if no one else will do it I will ask for a 64 bit version, please.
Yes, the computer I plan to put it on will handle more bling, but I want speed not bloat.

JeffreyC , thank you very much for your interest , i already started the work at a 64 bit version it will be uploaded soon.
Thank you.

veloc · 2019-03-01 17:06:40

is it gtk2 or gtk3 (because of the sharp fonts with gtk2)?
Would I need 64bit with dual core and 2gb of ram?

Mr.Bean · 2019-05-22 20:27:28

Hi, I like this distribution but why did you remove the fluxbox theme ? How to get it back ?

And what is the terminal that Fluxuan uses ?

Thk

wdq · 2019-06-15 18:31:54

@veloc , you need a minimum of 256 mb of ram to run fluxuan 32 bit and gtk2 and 3 are usable you can install any gtk 2 or 3 theme.

@ Mr.Bean you can add any theme you want in /home/.fluxbox/styles or just open pcmanfm hit ctrl+h and all the hidden folders will show go in .fluxbox then styles and paste you desired theme.

wdq · 2019-06-15 18:34:43

FluXuan v2 x86_64 is now on sourceforge page , click on files FluXuan 2019 and download it now you have the ability to add icons in fluxbox toolbar and automatic menu besides that comes with almoast all the programs you mightneed installed

Cosque · 2019-10-17 21:46:17

I already installed fluxuan v2, how do I activate the BCM4311 wireless card?

HevyDevy · 2019-10-18 13:56:47

Cosque, you need to install non-free firmware.

zephyr · 2020-02-27 02:58:23

@wdq: Downloaded latest FluXuan v2 x86_64, very fast and fun distro!

Fluxbox is one of my most enjoyed wm's, always enjoy to see what others are doing with it! Look forward to next release!

cheers

zephyr

wdq · 2020-03-17 18:51:31

@zephyr - Thank you very much !!!

With all this madness in the world had a bit more time so i updated the FluXuan website - > https://FluXuan.sourceforge.io as a first step
Second step i already started to work on a beowulf release and made the decision what programs will always be installed in all the releases that i will make .

Third step i started working to make a method to install FluXuan as a choice as WM from the Devuan netinstaller!

So see you as soon as UK closes everything HEHEHEHEH !!!!

zephyr · 2020-03-18 02:00:13

So see you as soon as UK closes everything HEHEHEHEH !!!!

The US is shutting down shop too! Here in the SW things have been slower happening but now school have closed locally!

Will check out your website, take care and do avoid the big crowds! Stay safe!

cheers

zephyr

wdq · 2020-05-05 05:45:20

Is That Time again i did updated the first post in here but i will post here too.

I`ll wait for Good and Bad Reply`s Thank You !

You can get it from - FluXuan Website
This how it looks--
FluXuanLinux

And you can get it from - FluXuan Website

zephyr · 2020-05-07 14:51:47

wdq wrote: I`ll wait for Good and Bad Reply`s Thank You !

Congratulations on the New Flxuan release...downloading!

Attractive website to boot! ...Enjoy your coffee!

cheers

zephyr

wdq · 2020-05-07 15:26:35

Zephyr , thank you very much i will be very happy to help you with your website if you want, there are a few things i want to try with google docs .
So please feel free to email me so i can return the kind coffee by making that website for you.

Last edited by wdq (2020-05-07 15:27:33)

zephyr · 2020-05-07 16:17:48

wdq wrote: So please feel free to email me so i can return the kind coffee by making that website for you.

A most generous and certainly very kind offer, let me kick it around a bit and let you know. Really don't owe me, the Fluxan distro is a great project and I'm impressed.

Stay well and safe

cheers

zephyr

Last edited by zephyr (2020-05-07 16:26:01)

wdq · 2020-05-07 19:36:00

OK so thinking of this , i got to realiza that most of devuan derivatives websites are on sourceforge so i decided to buy a domain and offer free subdomain to every devuan derivative
Domain that you will have your subdomain is
Devuan.club just got it so your domain will look like
Fluxuan.devuan.club
*.devuan.club
The main devuan.club will redirect to main devuan website so if you want a subdomain please email me for now and later on i will create a new thread where you can request it.

tuxd3v · 2020-05-21 02:20:10

Hello,
It seems the nice fit for a arm desktop version,
In the meantime,
Downloading for my i686 machine

Congratz & thanks for this amazing work!

Last edited by tuxd3v (2020-05-21 02:20:52)

ShorTie · 2020-06-04 23:35:26

I'd love to add it to my raspberry pi4 image.
Is the basic install script any where ??
Or maybe you could just add it into it ??
https://git.devuan.org/ShorTie/Devuan-imager

The officially official Devuan Forum!

#26 2018-05-17 15:37:41

Re: [NEW]-FluXuan Linux-[RELEASE]

#27 2018-05-23 20:25:43

Re: [NEW]-FluXuan Linux-[RELEASE]

#28 2018-05-24 05:15:50

Re: [NEW]-FluXuan Linux-[RELEASE]

#29 2018-07-17 07:29:31

Re: [NEW]-FluXuan Linux-[RELEASE]

#30 2018-07-25 15:39:12

Re: [NEW]-FluXuan Linux-[RELEASE]

#31 2018-12-01 16:20:12

Re: [NEW]-FluXuan Linux-[RELEASE]

#32 2019-01-06 23:49:05

Re: [NEW]-FluXuan Linux-[RELEASE]

#33 2019-01-14 09:42:32

Re: [NEW]-FluXuan Linux-[RELEASE]

#34 2019-01-14 09:44:31

Re: [NEW]-FluXuan Linux-[RELEASE]

#35 2019-03-01 17:06:40

Re: [NEW]-FluXuan Linux-[RELEASE]

#36 2019-05-22 20:27:28

Re: [NEW]-FluXuan Linux-[RELEASE]

#37 2019-06-15 18:31:54

Re: [NEW]-FluXuan Linux-[RELEASE]

#38 2019-06-15 18:34:43

Re: [NEW]-FluXuan Linux-[RELEASE]

#39 2019-10-17 21:46:17

Re: [NEW]-FluXuan Linux-[RELEASE]

#40 2019-10-18 13:56:47

Re: [NEW]-FluXuan Linux-[RELEASE]

#41 2020-02-27 02:58:23

Re: [NEW]-FluXuan Linux-[RELEASE]

#42 2020-03-17 18:51:31

Re: [NEW]-FluXuan Linux-[RELEASE]

#43 2020-03-18 02:00:13

Re: [NEW]-FluXuan Linux-[RELEASE]

#44 2020-05-05 05:45:20

Re: [NEW]-FluXuan Linux-[RELEASE]

#45 2020-05-07 14:51:47

Re: [NEW]-FluXuan Linux-[RELEASE]

#46 2020-05-07 15:26:35

Re: [NEW]-FluXuan Linux-[RELEASE]

#47 2020-05-07 16:17:48

Re: [NEW]-FluXuan Linux-[RELEASE]

#48 2020-05-07 19:36:00

Re: [NEW]-FluXuan Linux-[RELEASE]

#49 2020-05-21 02:20:10

Re: [NEW]-FluXuan Linux-[RELEASE]

#50 2020-06-04 23:35:26

Re: [NEW]-FluXuan Linux-[RELEASE]

Board footer