You are not logged in.
Thank you Geoff 42. I'll try that for a while and see if my system needs it.
p.s. The file is at /etc/default/tmpfs
^ Shouldn't /tmp be mounted in RAM?
$ findmnt /tmp TARGET SOURCE FSTYPE OPTIONS /tmp tmpfs tmpfs rw,nosuid,nodev,size=8048848k,nr_inodes=409600,inode64 $
I know systemd does that by default, not sure about sysvinit.
That is probably a leftover from mandriva or mageia, systemd.
How can I test if it's being used or not, and , like frequency and size? Do you know?
I can't remember why I did that...
edit... it was probably part of setting up a proxied firewalled self server written by Ashton Mills, using Mandrake, but I got there a bit late and had to use Mandriva.
good luck with the temporary move.
I get a little bit carried away, gradually...
Separate GPT partitions for
bios grub (1Mb)
/
swap
/tmp
/usr
/var
/usr/src
/home
Then I have all the archive partitionss attached to /home/.../local/
And 2 other linux distro hdd's (both beowulf atm).
List, list so nothings missed.
Although I've never seen that error, I wonder if these are installed
I haven't run this program for some time... so I've left in the versions in the list.
libportaudio2_19.6.0-1_amd64.deb libportsmf0_0.1~svn20101010-5_amd64.deb
libportmidi0_217-6_amd64.deb hydrogen-data_0.9.7-6_all.deb
hydrogen-doc_0.9.7-6_all.deb
hydrogen-drumkits-effects_2017.09.19~dfsg-1_all.deb
hydrogen-drumkits_2017.09.19~dfsg-1_all.deb
hydrogen_0.9.7-6_amd64.deb
I usually install fluid synth and timidity and use sound fonts too.
hope this helps.
oh, i use mlocate.
thank you for making me aware there is more to locate, i had used(?) installed slocate on another distro (Mandriva) long ago.
mlocate (locate command) finds things on my other harddrives as well.
mount | grep /home/
/dev/sde2 on /home/glenn/local/archive type ext4 (rw,relatime)
/dev/sdb3 on /home/glenn/local/data type ext4 (rw,relatime)
/dev/sdb6 on /home/glenn/local/free type ext4 (rw,relatime)
/dev/sdd1 on /home/glenn/local/media type ext4 (rw,relatime)
/dev/sde1 on /home/glenn/local/mt-93gb type ext4 (rw,relatime)
/dev/sdb2 on /home/glenn/local/other type ext4 (rw,relatime)
/dev/sdb4 on /home/glenn/local/spare type ext4 (rw,relatime)
/dev/sde5 on /home/glenn/local/stuff type ext4 (rw,relatime)
/dev/sde4 on /home/glenn/local/videos type ext4 (rw,relatime)
there is a movie with "TedBundy" in the name...
locate TedBundy
/home/glenn/local/data/Videos/Extremely.Wicked,.Shockingly.Evil,.And.Vile.TedBundy.mp4
thanks for the headsup!
I use it everywhere.
Especially /home/glenn/local/... 7 partitions in there
But mostly from root (su) konsole.
oh, it does work for user too.
locate konsole | grep .deb | grep /local/archive/
/home/glenn/local/archive/src/apt/debs/amd64/konsolekalendar_4%3a18.08.3-1_amd64.deb
/home/glenn/local/archive/src/apt/debs/i386/pool/DEBIAN/main/k/konsole
/home/glenn/local/archive/src/apt/debs/i386/pool/DEBIAN/main/k/konsole/konsole-kpart_18.04.0-1_i386.deb
/home/glenn/local/archive/src/apt/debs/i386/pool/DEBIAN/main/k/konsole/konsole_18.04.0-1_i386.deb
/home/glenn/local/archive/src/apt/debs/pool/DEBIAN/main/k/konsole
/home/glenn/local/archive/src/apt/debs/pool/DEBIAN/main/k/konsole/konsole-kpart_18.04.0-1_amd64.deb
/home/glenn/local/archive/src/apt/debs/pool/DEBIAN/main/k/konsole/konsole_18.04.0-1_amd64.deb
/home/glenn/local/archive/src/apt/debs-ascii2.1/amd64/konsole-kpart_4%3a18.04.0-1_amd64.deb
/home/glenn/local/archive/src/apt/debs-ascii2.1/amd64/konsolekalendar_4%3a16.04.3-4~deb9u1_amd64.deb
/home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/k/konsole
/home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/k/konsole/konsole-kpart_16.12.0-4_amd64.deb
/home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/k/konsole/konsole_16.12.0-4_amd64.deb
glenn@GamesBox ~ $
I generally use it as root when installing softwares...
Does it depend on the baloo and kde5-plasma search settings in "system settings"/Search/file search?
actually, my settings search all except /usr and /var... and one backup partition in ~/local/free
you may find the headers linux-headers-4.19.0-9-amd64 and "common" (and other versions) off the Beowulf 3.1 dvd here
.../pool/DEBIAN/main/l/linux/linux-headers-4.19.0-9-amd64_4.19.118-2_amd64.deb
.../pool/DEBIAN/main/l/linux/linux-headers-4.19.0-9-common_4.19.118-2_all.deb
updated versions here,
.../pool/DEBIAN/main/l/linux-latest/linux-headers-amd64_4.19+105+deb10u9_amd64.deb (but not the "common"...)
linux-images in here (.deb and .udeb)
.../pool/DEBIAN/main/l/linux-signed-amd64/
hope this helps you for next time. All the best
I just saw that Elton John movie "Rocket Man" this weekend, so tonight I'm binging on elton for my memory's sake.
Hello! :-)
Thank you for the correction...
As far as I'm aware open-rc run levels are "default, off, recovery and sysinit."
I thought the commented lines in the above script were left there from the sys-v script the file was used for.
I still not completely sure how this works... sorry for butting in.
I didn't see those other posts this morning when I added my 2 cents worth.
But, I'm glad I found out some more about run levels and open-rc.
Hi, my fw script is loaded by open-rc
It looks like this...
/home/glenn/build/firewall/fwautorun
#!/bin/bash
### BEGIN INIT INFO
# Provides: scriptname
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start daemon at boot time
# Description: Enable service provided by daemon.
### END INIT INFO
case "$1" in
start)
sh /home/glenn/bin/nftfw.sh
echo "Nftables Firewall is now ON"
;;
stop)
nft flush table filter
nft flush table ip6 filter
echo "NFTABLES Firewall is OFF"
;;
*)
echo "Usage: /etc/init.d/fwautorun {start|stop}"
exit 1
;;
esac
exit 0
I used gentoo, arch and debian guides when I set this up...
https://wiki.gentoo.org/wiki/Nftables/E … nd_IPv6.29
https://wiki.archlinux.org/index.php/Nf … l_firewall
https://linux-audit.com/nftables-beginn … filtering/
https://wiki.debian.org/nftables#Should … les_one.3F
I found this somewhere, ... repeat, my init script is called fwautorun.sh, yours may be different.
cp <path to init file>...fwautorun /etc/init.d
# update-rc.d nftables defaults
rc-update add nftables defaults
reboot.
you may have this part sorted, but because it's mentioned in the start up script, I'll copy it here...
/home/glenn/bin/nftfw.sh
#!/bin/bash
# /home/glenn/build/firewalls/nftfw.sh
# load templates
#nft -f /usr/share/doc/nftables/examples/syntax/ipv4-filter #loads the ipv4 template table (OS depandant address)
#nft -f /usr/share/doc/nftables/examples/syntax/ipv6-filter #loads the ipv6 template table (OS depandant address)
# instead of using templates, we create our own.
nft add table filter
nft add table ip6 filter
nft add chain filter input { type filter hook input priority 0 \; }
nft add chain filter forward { type filter hook forward priority 0 \; }
nft add chain filter output { type filter hook output priority 0 \; }
nft add chain ip6 filter input { type filter hook input priority 0 \; }
nft add chain ip6 filter forward { type filter hook forward priority 0 \; }
nft add chain ip6 filter output { type filter hook output priority 0 \; }
# clean out any leftovers...
nft flush table filter
nft flush table ip6 filter
nft add rule filter input ct state established accept
nft add rule filter input ct state related accept
nft add rule filter input iif lo accept
nft add rule filter input tcp dport ssh counter log accept
nft add rule filter input counter log drop
nft add rule filter output ct state established accept
nft add rule filter output ct state related accept
nft add rule filter output oif lo accept
nft add rule filter output ct state new counter accept
nft add rule ip6 filter input ct state established accept
nft add rule ip6 filter input ct state related accept
nft add rule ip6 filter input iif lo accept
nft add rule ip6 filter input tcp dport ssh counter log accept
nft add rule ip6 filter input icmpv6 type nd-neighbor-solicit accept
nft add rule ip6 filter input icmpv6 type echo-request accept
nft add rule ip6 filter input icmpv6 type nd-router-advert accept
nft add rule ip6 filter input icmpv6 type nd-neighbor-advert accept
nft add rule ip6 filter input counter log drop
nft add rule ip6 filter output ct state established accept
nft add rule ip6 filter output ct state related accept
nft add rule ip6 filter output oif lo accept
nft add rule ip6 filter output ct state new counter accept
echo "Nftables Firewall is now ON ... relay"
exit 0
# /home/glenn/build/firewalls/nftfw-off.sh
#!/bin/bash
# /home/glenn/build/firewalls/nftfw-off.sh
nft -f /usr/share/doc/nftables/examples/syntax/ipv4-filter #loads the ipv4 template table
nft -f /usr/share/doc/nftables/examples/syntax/ipv6-filter #loads the ipv6 template table
nft flush table filter
nft flush table ip6 filter
echo "Nftables Firewall is now OFF"
exit 0
I hope this helps, Glenn
The Body Keeps the Score – Brain, Mind, and Body in the Healing of Trauma
Bessel Van der Kolk, M.D.
...is a 2014 book by Bessel van der Kolk about the effects of psychological trauma, also known as traumatic stress.[1][2] The book describes van der Kolk's research and experiences, on how individuals are affected by traumatic stress, and its effects on the mind and body.
SynopsisIn The Body Keeps the Score, van Der Kolk focuses on survivors of psychological trauma, giving an account of how trauma has affected them.[1] He also discusses some possible routes to healing (including eye movement desensitization and reprocessing, yoga, and limbic system therapy).[3] The book has five parts: Rediscovery of Trauma, This is Your Brain on Trauma, The Minds of Children, The Imprint of Trauma and Paths to Recovery.[1]
https://en.wikipedia.org/wiki/The_Body_Keeps_the_Score
Opening my mind to other recovery methods... one day at a time.
Thank you for your efforts, I really appreciate it.
I use this to update/upgrade grub backgrounds...
Editing the /etc/default/grub file to reflect the name of the pic...
(I just use the largest pic I can find.)
#restore grub modifier files
rsync -avh /home/glenn/local/other/backup/backup-etc-sys/etc/default/grub /etc/default/
chown root:root /etc/default/grub
chmod a+rx /etc/default/grub
rsync -avh /home/glenn/local/other/backup/backup-etc-sys/boot/grub/*.png /boot/grub/
update-grub
I hope this gives someone an idea of the locations used.
I have a Ryzen 2700+ on a ROG Strix (asus) x470-F Gaming board with a Noctua NH-U12P (se2)
and it's quite good, very quiet and surprisingly easy to configure it's speed in the bios(?) settings.
I had to get a special adaptor for it to fit this Mobo, but I'm glad I did. :-)
I also use Palemoon for this forum and have no probs, I also use eMatrix blocker.
turn eMatrix off while you check. Once you have it working turn eMatrix back on and set it up so you get no interference.
It's probably a cache issue...
about 12 non-system gui programs
text editor: kate
Web browsers: Palemoon (browsing) and Firefox (radio)
Clementine: Music
Dolphin: file manager
vlc: video clips and movies
Steam: CounterStrike:Source
Konsole: Terminal console
Synaptic: Package Manager
gwenview: Picture organiser
fslint: file management
OpenTTD: Logistics game (virtual train set)
... Oh well, maybe 10.
I backup my personal data using
rsync -avh <source> <destination>
scripts (which are very basic bash commands)
I also use reverse instructions to restore. But I haven't had to do that in a long time, touch wood. :-)
I used to use "simplebackup" but it stopped working and support for it disappeared, but that was when I was still using Mageia/Mandriva (about ten years ago?).
Thankfully, Devuan Beowulf is more stable than any other OS I have ever used before.
Better look after yourself. :-) Andy Durant
https://www.youtube.com/watch?v=hzFKNSIAu_I
Thanks for that, I've seen the same error message lately, when installing netbeans.
I managed to get netbeans to run, but I had to remove all the java jre and jdk packages from the Beowulf 3.1 install first. There were many conflicts.
But if you can expand/extract the pacakges from the ascii 2.1 iso, you may have joy with this list...
dpkg -i /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/s/subversion/subversion_1.9.5-1+deb9u4_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/a/apr-util/libaprutil1_1.5.4-3_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/a/apr/libapr1_1.5.2-5_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/s/subversion/libsvn1_1.9.5-1+deb9u4_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/g/gdbm/libgdbm3_1.8.3-14_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/s/serf/libserf-1-1_1.3.9-3+deb9u1_amd64.deb
dpkg -i --force-downgrade /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/j/java-common/default-jdk_1.8-58+deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/j/java-common/default-jdk-headless_1.8-58+deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/j/java-common/default-jre-headless_1.8-58+deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/j/java-common/default-jre_1.8-58+deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jre-headless_8u222-b10-1~deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jre_8u222-b10-1~deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jdk-headless_8u222-b10-1~deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jdk_8u222-b10-1~deb9u1_amd64.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/c/ca-certificates-java/ca-certificates-java_20170929~deb9u3_all.deb /home/glenn/local/archive/src/apt/debs-ascii2.1/pool/DEBIAN/main/j/java-common/java-common_0.58+deb9u1_all.deb
#install netbeans as (user) from the download directory
./netbeans-8.2-linux.sh
#run netbeans as (user)
/home/glenn/netbeans-8.2rc/bin/netbeans
I hope this helps you
ps, here is the list...
/pool/DEBIAN/main/s/subversion/subversion_1.9.5-1+deb9u4_amd64.deb
/pool/DEBIAN/main/a/apr-util/libaprutil1_1.5.4-3_amd64.deb
/pool/DEBIAN/main/a/apr/libapr1_1.5.2-5_amd64.deb
/pool/DEBIAN/main/s/subversion/libsvn1_1.9.5-1+deb9u4_amd64.deb
/pool/DEBIAN/main/g/gdbm/libgdbm3_1.8.3-14_amd64.deb
/pool/DEBIAN/main/s/serf/libserf-1-1_1.3.9-3+deb9u1_amd64.deb
/pool/DEBIAN/main/j/java-common/default-jdk_1.8-58+deb9u1_amd64.deb
/pool/DEBIAN/main/j/java-common/default-jdk-headless_1.8-58+deb9u1_amd64.deb
/pool/DEBIAN/main/j/java-common/default-jre-headless_1.8-58+deb9u1_amd64.deb
/pool/DEBIAN/main/j/java-common/default-jre_1.8-58+deb9u1_amd64.deb
/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jre-headless_8u222-b10-1~deb9u1_amd64.deb
/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jre_8u222-b10-1~deb9u1_amd64.deb
/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jdk-headless_8u222-b10-1~deb9u1_amd64.deb
/pool/DEBIAN/main/o/openjdk-8/openjdk-8-jdk_8u222-b10-1~deb9u1_amd64.deb
/pool/DEBIAN/main/c/ca-certificates-java/ca-certificates-java_20170929~deb9u3_all.deb
/pool/DEBIAN/main/j/java-common/java-common_0.58+deb9u1_all.deb
To be sure, use
su -
for Devuan Beowulf 3.0 and above.
It's a program that saves/backs-up websites. Mostly used by web site sys-admin types.
I used it to save neets, a navy electronics course site. :-)
You can save web page/s or entire sites (if you have permissions)
hope this helps.
Looks great, very cool colours.