The officially official Devuan Forum!

safari

Member

Registered: 2026-06-02

Posts: 13  

How to set system time?

My system time is out. How do I fix that? hwclock, timedatectl, and ntp aren't available.

Last edited by safari (Yesterday 14:33:03)

kapqa

Member

Registered: 2019-01-02

Posts: 702  

Re: How to set system time?

sudo apt install ntpsec-ntpdate

is valid for devuan 6.0

sudo ntpdate-debian

2026-07-02 16:39:31.356971 (+0200) +0.170255 +/- 0.010254 0.debian.pool.ntp.org 37.247.53.178 s2 no-leap

but with dual-boot windows + linux there is still woes, at least on computers that i use.

safari

Member

Registered: 2026-06-02

Posts: 13  

Re: How to set system time?

Thanks, that worked. Do you know if that sets OS time only, or hardware time too?

Last edited by safari (Yesterday 15:03:15)

kapqa

Member

Registered: 2019-01-02

Posts: 702  

Re: How to set system time?

would have to guess, but apparently i am able to mess up the time every other time i boot into windows and back , or so ~

there have been kind peopel on this forum who told me how to fix  time with windows tricks ]

but those have tricks not lasted that long also use several computer , and what function on one, seem not always stable on another. . it has probably to do aswell with the computers itself; and maybe also language, regional settings may interfere?

maybe some day we can get to to the bottom of it.

kapqa

Member

Registered: 2019-01-02

Posts: 702  

Re: How to set system time?

i think the confusion stems also from the fact that during installation i set "language: englsish"

but i live somehwere else, and i am however constrained to select a region that has "english mapping" and hence everything goes tupsy turvy;

this is probably a limitating on the lclassic debian-inux installer.

rolfie

Member

Registered: 2017-11-25

Posts: 1,463  

Re: How to set system time?

Do you know if that sets OS time only, or hardware time too?

ntp sets the HW clock. The rest is job of the operating system.

In Linux its standard to set the HW re. the bios clock to UTC. During installation you configure your location and timezone, and the OS then generates the local time from that.

Windows per default is running on local time, i.e. the bios clock is set to local time. This creates 2h time shifts on a Linux/Windows dual boot system. The best fix is to set Windows to UTC.

FM81

Member

Registered: 2017-09-16

Posts: 40  

Re: How to set system time?

ntp sets the HW clock.

As fas as I know it doesn't. (And I'm not sure, if this was changed with ntpsec?)
NTP sets the systemtime only ...

If NTP would be depending on the HW-clock, how should it work with devices (e.g. singleborad-computers) without any such?

Best Regards, FM81

Last edited by FM81 (Today 04:20:39)

---

The most brilliant role in comedy is that of a fool, he must not be in order to make it seem. (Miguel de Cervantes)

RedGreen925

Member

Registered: 2024-12-07

Posts: 301  

Re: How to set system time?

would have to guess, but apparently i am able to mess up the time every other time i boot into windows and back , or so ~

there have been kind peopel on this forum who told me how to fix  time with windows tricks ]

but those have tricks not lasted that long also use several computer , and what function on one, seem not always stable on another. . it has probably to do aswell with the computers itself; and maybe also language, regional settings may interfere?

maybe some day we can get to to the bottom of it.

It has to do with windows always setting the system clock to local time. Most Linux installs default to Universal Time, the UTC method o doing it. A .reg file download to make the required change.

https://www.howtogeek.com/wp-content/up … C-Time.zip

From this page.

https://www.howtogeek.com/323390/how-to … l-booting/

rolfie

Member

Registered: 2017-11-25

Posts: 1,463  

Re: How to set system time?

As fas as I know it doesn't. (And I'm not sure, if this was changed with ntpsec?)

I does indirectly. When I shut down my PC the HW clock is updated. ntp and ntpsec are the same.

If NTP would be depending on the HW-clock, how should it work with devices (e.g. singleborad-computers) without any such?

I am pretty sure any device supporting a clock has a RTC on board.

FM81

Member

Registered: 2017-09-16

Posts: 40  

Re: How to set system time?

I does indirectly. When I shut down my PC the HW clock is updated.

In SYSVINIT this is done by /etc/init.d/hwclock.sh for example. But it works independent of what your systemtime was set.
It does it's job too, if there is no NTP or if you've changed your systemtime manually.

I am pretty sure any device supporting a clock has a RTC on board.

For example, Raspberry, at least up to models 4 (didn't know about 5) doesn't have a RTC. ("fake-hwclock" here is not the same)

But independent from all said before, you can go the way "vice versa" and set some type of hardware-vlock (for example DCF77, GPS or what ever) as source for NTP.

Greetings, FM81

Last edited by FM81 (Today 12:15:42)

---

The most brilliant role in comedy is that of a fool, he must not be in order to make it seem. (Miguel de Cervantes)