The officially official Devuan Forum!

grebulos

Member

Registered: Yesterday

Posts: 6  

[SOLVED] persist initramfs fsck.log / persist the following output on disc fail

Immediately after installation from devuan_excalibur_6.1.0_amd64_netinstall.iso, the following two failures are shown in the boot process:

Sun Feb 08: 15:18:10 2026: Cannot persist initramfs fsck.log ... failed!
...
Sun Feb 08: 15:18:10 2026: Checking file systems...Cannot persist the following output on disc ... failed!

I have searched the web, but anything I found was in conjunction with an additional error/failure (like this here: https://dev1galaxy.org/viewtopic.php?id=7586) and these two were not addressed.

Is this something to worry about? And if so, what can be done to fix it?

Thanks for any suggestions.

Current disk layout:

nvme0n1
├─nvme0n1p1 vfat   FAT32       9D48-C8DC                             965.3M     1% /boot/efi
├─nvme0n1p2 ext4   1.0         2a1c42c6-75e1-43b3-b040-a5804f476b56      9G     9% /
├─nvme0n1p3 ext4   1.0         3fccc3db-8aac-40c9-aeef-f60ed632416b    3.6G     7% /var
├─nvme0n1p4 swap   1           dcdcc142-cb52-44dc-a485-7f587b4a354d                [SWAP]
└─nvme0n1p5 ext4   1.0         c5ab0730-631b-4dfb-a186-d3c0fd74ef03   95.1G     0% /srv

ralph.ronnquist

Administrator

From: Battery Point, Tasmania, AUS

Registered: 2016-11-30

Posts: 1,594  

Re: [SOLVED] persist initramfs fsck.log / persist the following output on disc fail

Nothng to worry about.

TL;DR; The initial boot sequence includes a filesystem check of the root filesystem, and that results in a log file which at that time resides in RAM. Then the scripting for some reason gets confused when trying to store the log on disk. I'm guessing the script writer failed to consider the range of possible boot-up scenrios so ended up making the script lodging a spurious notice instead.

grebulos

Member

Registered: Yesterday

Posts: 6  

Re: [SOLVED] persist initramfs fsck.log / persist the following output on disc fail

Thank you!