The officially official Devuan Forum!

You are not logged in.

#1 2021-03-30 15:44:18

samhain
Member
Registered: 2017-04-03
Posts: 61  

Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

I just uploaded a new image of Devuan Chimaera + TDE 14.1. The image was tested on RPi 3+, it should work on RPi4 and RPi 400, too.

https://github.com/zwieblum/devuan-imag … tde.img.xz

UID/PWD: pi/pi and root/toor

Enjoy smile

Last edited by samhain (2021-03-30 19:48:51)

Offline

#2 2021-03-30 18:02:28

berni51
Member
From: Middle of Germany
Registered: 2018-12-20
Posts: 94  
Website

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

samhain wrote:

...........
Enjoy smile

I did so! Nice job, the image runs fine on my raspi 4 (8GB) - if I connect the ssd to an USB-2 port. Using USB-3 brings lots of errors and long delays. However on USB-2 it's OK.
This is my first Trinity system and its fast on the small machine - what I never have expected.

Is there an option to expand the images partition to the full ssd size?

Regards
Berni

Last edited by berni51 (2021-03-30 18:04:37)


The good ol' days will not return, and the rocks might smelt and the sea may burn.

Offline

#3 2021-03-30 19:46:52

samhain
Member
Registered: 2017-04-03
Posts: 61  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

Glad it works on RPi 4 smile

to expand the partition you can use "raspi-config": "su" -> raspi-config -> Advanced -> expand ... (don't know how that menu entry is named). Root password is "toor".

I'll need to test the USB3 port on my RPi400. Do you get these errors when you use a SD-card, too?

Last edited by samhain (2021-03-30 19:47:48)

Offline

#4 2021-03-30 20:42:38

berni51
Member
From: Middle of Germany
Registered: 2018-12-20
Posts: 94  
Website

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

Thanks, will try to expand now. I did not test the image with SD card yet, but will do it tomorrow.


The good ol' days will not return, and the rocks might smelt and the sea may burn.

Offline

#5 2021-03-30 22:16:12

c0rnelius
Member
Registered: 2020-06-13
Posts: 51  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

Sounds like a usb-storage.quirks issue. Try adding it to the cmdlline and see if it corrects the usb3 problem.

Last edited by c0rnelius (2021-03-31 09:47:50)

Offline

#6 2021-03-31 08:07:14

berni51
Member
From: Middle of Germany
Registered: 2018-12-20
Posts: 94  
Website

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

@cOrnelius: Thanks, that worked perfect and the image now runs fine at an USB-3 port. On another raspi 4 I use one of your images and there I must not fix the quirk issue. Is this depending from the SSD type and manufacturer?

@samhain: Using raspi-config did not work correctly. Some tool showed the new size of 470 G, other the old size of 8 G. Then I copied lots of file to / and at 8 G it stops and indicated that it is full.
I then did the expand manually via fdisk and now I have the full size off the SSD.


The good ol' days will not return, and the rocks might smelt and the sea may burn.

Offline

#7 2021-03-31 09:53:38

c0rnelius
Member
Registered: 2020-06-13
Posts: 51  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

berni51 wrote:

@cOrnelius: Thanks, that worked perfect and the image now runs fine at an USB-3 port. On another raspi 4 I use one of your images and there I must not fix the quirk issue. Is this depending from the SSD type and manufacturer?

Yes, it seems to vary in USB-3 storage type and manufacture.

Offline

#8 2021-03-31 16:55:59

samhain
Member
Registered: 2017-04-03
Posts: 61  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

@raspi-config: Thanks for testing ... looks like I'll need to craft my own tool smile

Offline

#9 2021-03-31 18:10:18

berni51
Member
From: Middle of Germany
Registered: 2018-12-20
Posts: 94  
Website

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

smile The tools was too fast - suspisious fast.
However your image works very good!

Last edited by berni51 (2021-03-31 18:11:20)


The good ol' days will not return, and the rocks might smelt and the sea may burn.

Offline

#10 2021-03-31 18:12:44

samhain
Member
Registered: 2017-04-03
Posts: 61  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

Oh, you did reboot after raspi-config, did you?

Offline

#11 2021-03-31 20:45:59

berni51
Member
From: Middle of Germany
Registered: 2018-12-20
Posts: 94  
Website

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

Yes, I did.


The good ol' days will not return, and the rocks might smelt and the sea may burn.

Offline

#12 2021-07-29 15:28:27

samhain
Member
Registered: 2017-04-03
Posts: 61  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

I uploaded a new chimaera image for RaspberryPi: https://dev1galaxy.org/viewtopic.php?pid=30913#p30913 - version with TDE will come in some days.

Last edited by samhain (2021-07-29 15:29:19)

Offline

#13 2021-08-05 13:52:33

tuxd3v
Member
Registered: 2019-11-14
Posts: 183  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

samhain wrote:

I uploaded a new chimaera image for RaspberryPi: https://dev1galaxy.org/viewtopic.php?pid=30913#p30913 - version with TDE will come in some days.

nice smile


Best Regards,
tux

Offline

#14 2021-08-30 20:43:26

samhain
Member
Registered: 2017-04-03
Posts: 61  

Re: Testimage: RaspberryPi 3+, Chimaera + TDE 14.1

I have uploaded a new version of Devuan Chimera + TDE:

Image: https://github.com/zwieblum/devuan-imag … tde.img.xz
sha256: https://github.com/zwieblum/devuan-imag … .xz.sha256

Release Notes: https://github.com/zwieblum/devuan-imag … /README.md

# UID / PWD:
pi   / pi
root / < no password >

Enjoy smile

Screenshot: https://github.com/zwieblum/devuan-imag … pshot2.png (sorry, don't know how to get the img tag working)

Last edited by samhain (2021-08-30 20:47:12)

Offline

Board footer