You are not logged in.
- Topics: Active | Unanswered
#1 2022-08-11 10:48:38
- drito
- Member
- Registered: 2022-08-11
- Posts: 5
lsblk command doesn't see my usb plugged Android phone
Hello, I set the android usb mode to file transfer on the phone popup. libmtp-common is also installed. Neither spacefm or lsblk see the device.
But I was surprised by the Godot engine editor since it is able to detect the device and I even exported an runned a game from the PC.
Some info:
OS: Devuan GNU/Linux 4 (chimaera) x86_64
Host: 20BECTO1WW ThinkPad T540p
Kernel: 5.10.0-16-amd64
Uptime: 46 mins
Packages: 835 (dpkg), 16 (guix-user)
Shell: bash 5.1.8
Resolution: 1920x1080
WM: bspwm
Theme: Graphite-dark [GTK2/3]
Icons: Tela [GTK2/3]
Terminal: alacritty
CPU: Intel i5-4210M (4) @ 3.200GHz
GPU: Intel 4th Gen Core Processor
I forgot another info: the init system is runit.
I have no idea about what happens. Advices are welcome.
Last edited by drito (2022-08-11 12:24:17)
Offline
#2 2022-08-11 17:10:18
- chris2be8
- Member
- Registered: 2018-08-11
- Posts: 307
Re: lsblk command doesn't see my usb plugged Android phone
At a guess the system sees the phone, but not as a block device. Try lsusb and see if that says anything (if in doubt run lsusb with the phone plugged in and again after unplugging it). Then try lsusb -v -s <whatever it's address is>
Offline
#3 2022-08-11 17:39:45
- drito
- Member
- Registered: 2022-08-11
- Posts: 5
Re: lsblk command doesn't see my usb plugged Android phone
Here the result.
Thanks for the info.
lsusb -v -s 16
Bus 002 Device 016: ID 0fce:51de Sony Ericsson Mobile Communications AB F3112
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0fce Sony Ericsson Mobile Communications AB
idProduct 0x51de
bcdDevice 2.28
iManufacturer 3 Sony
iProduct 4 F3112
iSerial 5 RQ3001MLTC
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x003e
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 0
iInterface 17 MTP
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x001c 1x 28 bytes
bInterval 6
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 66
bInterfaceProtocol 1
iInterface 18 ADB Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Offline
#4 2022-08-11 20:08:21
- MiyoLinux
- Member
- Registered: 2016-12-05
- Posts: 1,323
Re: lsblk command doesn't see my usb plugged Android phone
sudo apt install android-file-transfer...for a GUI...
sudo apt install android-file-transfer-qt5
See subsequent posts regarding the GUI...
Last edited by MiyoLinux (2022-08-12 15:51:26)
I have been Devuanated, and my practice in the art of Devuanism shall continue until my Devuanization is complete. Until then, I will strive to continue in my understanding of Devuanchology, Devuanprocity, and Devuanivity.
Veni, vidi, vici vdevuaned. I came, I saw, I Devuaned.
Offline
#5 2022-08-12 11:42:23
Re: lsblk command doesn't see my usb plugged Android phone
sudo apt install android-file-transfer...for a GUI...
sudo apt install android-file-transfer-qt5
Hello. Your last specified command is not needed, because the package
android-file-transfer
already contains a graphical ui.
What economists call over-production is but a production that is above the purchasing power of the worker, who is reduced to poverty by capital and state.
----+- Peter Kropotkin -+----
Offline
#6 2022-08-12 15:48:32
- MiyoLinux
- Member
- Registered: 2016-12-05
- Posts: 1,323
Re: lsblk command doesn't see my usb plugged Android phone
You're correct. My mistake.
I got it confused with FreeBSD. Sorry. I'll edit my original post.
Thanks Ogis. 
I have been Devuanated, and my practice in the art of Devuanism shall continue until my Devuanization is complete. Until then, I will strive to continue in my understanding of Devuanchology, Devuanprocity, and Devuanivity.
Veni, vidi, vici vdevuaned. I came, I saw, I Devuaned.
Offline
