You are not logged in.
tuxmath, tuxtype ![]()
Captured Freedom
Fiona Joy Hawkins
Hello ,
i found that on Devuan Ascii i could not connect to my local Macmini Server that has Samba activated.
When in Devuan Ascii i would click "Browse Network"
the error would be
Failed to open "/ on ".
Could solve this by installing all Gvfs packages available on Devuan
sudo apt-get install gvfs*
Afterwards when clicking the Network icon, the Windows Network and MacminiServer would show up.
Hello ,
i have a new installation of Devuan Ascii 64bit on my computer with XFCE4 as Desktop.
Noticed that on latest Thunderbird 68.2.2 it would not allow me to change the width of the columns in the mail section or in the feed reader section.
Whenever i hover over the separators, the icon would not change from an arrow to the icon meant for changing the width - it remains the same pointer arrow.
Any idea?
Thanks
Hello ,
i try to build Handbrake from source on Devuan Ascii.
the following error occurs during ./config :
ERROR: minimum required pkg-config version is 0.29.1 and /usr/bin/pkg-config is 0.29
however
sudo apt install pkg-config
Reading package lists... Done
Building dependency tree
Reading state information... Done
pkg-config is already the newest version (0.29-4+b1).
Vulkan and VCE are available via libre driver: https://www.x.org/wiki/RadeonFeature/#index1h2
You don't need AMDGPU-PRO for that.
Hello thank you very much for your help; how can i check if i have those Vulkan and VCE enabled and libre driver installed?
The system is a Ascii with LXDE+KDE (sort of Hybrid atm).
kapqa wrote:well, i just wanted to use AMD VCE for video encoding in HandBrake and it does require the AMDGPU-PRO driver.
i have seen that the opensource has good benchmark but some features seem only available with the amd drivers, hence my timid try to install them.thanks rolfie, i tried also with bpo.6, it did not make a difference (for now). maybe i just it wrong.
According to official info it's based on ffmpeg: https://github.com/HandBrake/HandBrake/ … S.markdown
You don't need AMDGPU-PRO driver. You can try vdpau or vaapi with amdgpu driver.
I did use this guide here, and with Ubuntu 18.04 could get it to activate, however, it would also need some vulkan kit
https://handbrake.fr/docs/en/latest/tec … o-vce.html
according to AMD release notes for AMDGPU_Pro Driver (19.30)
To use the Vulkan driver in this stack, Vulkan SDK version v1.1.109.0 needs to be installed. The SDK can be downloaded from: https://vulkan.lunarg.com/sdk/home
well, i just wanted to use AMD VCE for video encoding in HandBrake and it does require the AMDGPU-PRO driver.
i have seen that the opensource has good benchmark but some features seem only available with the amd drivers, hence my timid try to install them.
thanks rolfie, i tried also with bpo.6, it did not make a difference (for now). maybe i just it wrong.
Hello ,
i just tried this guide here for installing the amdgpu-pro driver on devuan ascii.
https://wiki.debian.org/AMDGPUDriverOnS … all&rev=36
but it would not succeed.
i did install the kernel 4.19.0.0.bpo.5-amd64 + the linux-headers.
could it be that the author used another backported kernel in stretch or where could the error lie?
Thank you.
it seems i found the answer here
https://unix.stackexchange.com/question … ing-buster
correct solution for me was answer by
bhlip
Many thanks,
the error message upon booting goes similar like this
warning: 'alsactl -E Home=/run/alsa/restore' failed with error message 'Found hardware: "HDA-Intel" "Realtek -Generic" ...
Hello ,
i updated my box to Beowulf and noticed the following behaviour:
Upon booting there is an error notice with alsa something and HD (soundcard) and when i login, i don't have sound.
My soundcard is an internal one (Realtek HD) on the Mainboard
Alsamixer shows:
0 HDA ATI HDMI (Graphics Card HDMI)
1 HD-Audio Generic (Realtek ALC1220).
When i go into Pavucontrol the error comes
Establishing connection to Pulseaudio. Please wait....
and nothing happens.
The Speakers are connected thru a Toslink Cable to the Digital Output on the Mainboard.
Yesterday,
When i disconnected the cable and reconnected, the connection got established and the sound came.
+
Today, not even that helps.
Any thoughts on how to solve this?
oh , silly me, this was solved , i just had forgotten to click on "Network" in Thunar, and then the Librelec Samba Share would become visible.
to install debian on my macmini 2006 i used "refit" tool first, and then after installation of the linux distro via cd used the included partition tool to update the partition table.
afterwards some linux distro would sometimes not boot with refit, so i installed refind over it (and choosing no to remove refit partition tool ) and then upon reboot would boot linux grub from within refind.
debian SQUEEZE not STRETCH was the best option at that time, alongside with debian wheezy and lubuntu.
ubuntu cd for some strange reason very often didn't get picked up by the apple machine for some reason or did not allow to boot.
Hello ,
i tried to update the Libreelec on my Raspberry Pi2 by putting a file into a folder on the SDcard connected to the Raspberry.
It is recommended to be done via Samba Share, as described here
https://libreelec.wiki/accessing_libree … __sambasmb
For using the SMB shares under Ubuntu, just open a file browser on your machine, double click at the address bar and enter the following:
smb://enter_ip_address_here/
I tried this with XFCE, but it would not allow me to do it.
Then browsed quickly, and somewhere it stated that there is needed an plugin for Thunar, probably Thunar-samba-shares or thunar-samba-plugin,
but it did not find such a plugin.
Is there a way to conveniently activate this samba share on XFCE without too much configuration?
On Windows it was pretty straightforward : just typing the adress in the Windows Explorer AdressBar, and the two (PC and Raspbi) get connected.
tried today the Ascii with KDE, and on top of it i did install TDE 14 (never tried Trinity Desktop before) and i was very pleasantly surprised.
Some things did not function though (printing for example) so i went back to Ascii XFCE, which has been most stable and rapid.
probably this hybridizaion occured because i did choose "lightdm" as displaymanager instead of "sddm" - i did not know that sddm is the one favored by kde. it would be good if upon presented with the option of choosing a displaymanager there would be shown a bit more info on the available options.
Well, not so much, but for some reason i was not able to switch from LXDE to KDE as Login Manager (with KWin); effectively,
the StartLogin, the Menu was managed by LXQT and the Windows-Display-Manager and FileManager was with KDE (which i very much like, especially the older more responive kde4) -
- so i try to change to KDE altogether, and in the process i ended up performing a new install with Devuan Ascii XFCE.
I really like the responsiveness of XFCE, but for the rest i prefer KDE.
still not sure how to go on with the Desktop Environment; it would be nice to able to switch easier "on the fly" , but this time i was just not persevering enough.
KDE + LXQT is certainly a interesting match (actually i thought that i get a full KDE and a full LXQT, but somehow it got mingled together).
i was able to solve bis problem by enabling the "contrib" and "non-free" repositories in /etc/apt/sources.list and then updating the package list with "sudo apt-get update"
afterwards i installed with this line from the debian atihowto (under point 4.)
# apt-get install firmware-linux-nonfree libgl1-mesa-dri xserver-xorg-video-ati
the appropriate packages; now the second monitor is active!
thanks!
Hello ,
i have downgraded yesterday from Beowulf to Asciii by performing a clean install (from DVD.iso choosing LXDE + KDE as graphical desktops > now it seems i have a hybrid Devuan ![]()
on Beowulf both of my monitor were recognized and functioning.
Now on Asciii only one monitor is recognized.
I presume that i am missing some drivers for the graphics card RX 560.
it seems the card is recognized, but something is missing.
lspci | grep 'VGA\|3D'
08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460] (rev e5)
Please let me know if i need to activate to some non-free repository to install the proper software.
Thank you very much.
what i noticed is that upon booting there is a quite delay with showing several lines
unknown lvalue something autospawn '" '"
unknown lvalue something autospawn '" '"
unknown lvalue something autospawn '" '"
unknown lvalue something autospawn '" '"
unknown lvalue something autospawn '" '"
unknown lvalue something autospawn '" '"
sorry for not being too precise here
thanks, this helped me too, on XFCE4. just upgraded from ascii to beowulf. nice!
yes, i think so, it helps with making firefox 52.9 the preferred browser. sometimes it has to be adjusted manually, inside programs, but most of the times it seems to work, withouth the need of deinstalling firefox 60 esr.
for netflix it seems only google chrome is working atm on linux devuan ascii ... streaming right now thru it. chromium and firefox don't seem to function; pipelight is no more, that used to function for firefox.