You are not logged in.
- Topics: Active | Unanswered
#651 Re: Desktop and Multimedia » Pipewire » 2022-12-16 14:51:30
Acer Aspire Laptop with Daedalus/openrc/Cinnamon DE:
Just installed:
# apt install pipewire pipewire-pulse wireplumberand added the lines as listed in the previous post to my .xsessionrc: Audacious is playing my playlist as well configured to ALSA as to Pulse.
I am just missing: separate topic ...
rolfie
#652 Re: Hardware & System Configuration » [SOLVED] How to get hardware info » 2022-12-12 21:59:09
When you look on your screenshot in post #25 at SCSI1 #1, there is an EPS = efi. You have a relatively recent HW, so an efi installtion is advisable.
But: I am out with any RAID stuff. I have tried U320 SCSI RAIDs on Windows XP and 7, and damned them as unreliable, no matter if RAID0 for speed or RAID1 for some sort of backup. All my Linux boxes are running either from a single HD on very old stuff, on newer units SSD or NVME. RAID is no backup. It just complicates things (for me at least).
To delete something that has been set: select the partition by moving the cursor to it, them you can set properties or even delete that partition.
#653 Re: Hardware & System Configuration » [SOLVED] How to get hardware info » 2022-12-12 19:02:53
Now I can't find any menu that will allow me to make granular partition changes.
On https://www.devuan.org/os/documentation … all-devuan is a nice description of a default installation with screenshots.
In Step 10 you have to choose Manual to get full access to the disks/devices/partitions the installer sees. You may also use a gparted live cd to adjust the disk setup, but you will have to go through the assignment via Step 10 anyhow.
Note: from what I have seen you are running an efi installation. Add a ESP as first device with 128MB/FAT32.
#654 Re: Devuan » Setting up User accounts - needs improvement » 2022-12-11 10:33:12
Have a look at gnome-system-tools. Included is an users and groups dialogue that offers all you want.
#655 Re: Hardware & System Configuration » [SOLVED] How to get hardware info » 2022-12-10 21:26:49
Some thoughts from my end:
inxi, hwinfo and lshw are not part of a default installation, you need to install them if you want to have them available.
dcolburn wrote:
From root
ip link set etho updoesn't error, it's just ignored.
Pinging the router errors "Network is unreachable"
eth0 = eth"zero" or did you use etho = eth"ooohhh"? Typo or mistake?
Just came across some article that was mentioning strange router setups that only talk to a single PC with a defined MAC address, all others are ignored. What are the leds on the NIC doing after power on? What type and brand is your router? How is it setup?
Interesting: you are running a 686 kernel on a computer that should support amd64. What is the reason for that choice?
Don't think that is causing the issue, but it may mean that its advisable to re-install the PC with an amd64 iso for optimum performance.
It also would make sense to show us the dmesg or syslog outputs related to the network adapter.
I was about to ask you to run an apt update/upgrade as next action and try to load a backports kernel. Won't work that easily without network.
#656 Re: Off-topic » [SOLVED] I don't know about hardware but need a PC » 2022-12-05 17:49:08
Attention, the 5850U is a mobile CPU, while a 5700G is a CPU for a normal mainboard. The mobile is very rare on the retail market, mostly available only in laptops.
What is your goal, a mobile system or a standard desktop?
#657 Re: Hardware & System Configuration » (Chimaera) Accessing NAS - XFCE not responding » 2022-11-30 22:02:43
Instead of using Samba, can the NAS be connected via nfs? This is native Linux, and not a diversion via a Windows related feature.
#658 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-30 21:54:10
With efivarfs /sys/firmware/efi/efivars efivarfs ro 0 0 in the fstab I am also getting a boot error, copy from the bootlog:
Wed Nov 30 22:39:45 2022: Mounting local filesystems...mount: /sys/firmware/efi/efivars: efivarfs already mounted or mount point busy.
Wed Nov 30 22:39:46 2022: dmesg(1) may have more information after failed mount system call.No trace of this message in syslog and dmesg. messages just shows information from Nov 23rd the day I installed Daedalus on this machine. Same behaviour as on my laptop.
# grep efivars /etc/fstab /proc/self/mounts
/etc/fstab:#none /sys/firmware/efi/efivars efivarfs ro 0 0
/etc/fstab:efivarfs /sys/firmware/efi/efivars efivarfs ro 0 0
/proc/self/mounts:none /sys/firmware/efi/efivars efivarfs ro,relatime 0 0
# mount -t efivarfs -o remount,rw none /sys/firmware/efi/efivars
# grep efivars /proc/self/mounts
none /sys/firmware/efi/efivars efivarfs rw,relatime 0 0Looks like despite the error the remount to ro worked, and also switching back to rw.
Maybe there is a mismatch between messages and what is happening under the hood. My machines are not haunted, I guess we are coming closer to the root cause.
#659 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-30 21:38:02
On my X570/Ryzen9/6700XT system I have added none /sys/firmware/efi/efivars efivarfs ro 0 0 to the fstab, no errors during boot.
# grep efivars /etc/fstab /proc/self/mounts
/etc/fstab:none /sys/firmware/efi/efivars efivarfs ro 0 0
/proc/self/mounts:none /sys/firmware/efi/efivars efivarfs ro,relatime 0 0
# mount -t efivarfs -o remount,rw none /sys/firmware/efi/efivars
# grep efivars /etc/fstab /proc/self/mounts
/etc/fstab:none /sys/firmware/efi/efivars efivarfs ro 0 0
/proc/self/mounts:none /sys/firmware/efi/efivars efivarfs rw,relatime 0 0I'll change the fstab entry the one I used for Chimaera using efivarfs as label. Will post the results after reboot.
#660 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-30 21:02:29
I have also applied the solution to my workstation now. Both fresh installs from netboot, stock kernel, openrc as init.
#661 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-30 07:40:08
@Ralph: thank you, your explanation makes sense, tried it and it works. The error during boot is gone.
Summary:
* Let mountkernfs.sh attach the efivars.
* To change the efivarfs to ro, specify in the fstab none /sys/firmware/efi/efivars efivarfs ro 0 0
* If you need to modify anything in the efi settings, remount rw with mount -t efivarfs -o remount,rw none /sys/firmware/efi/efivars
@aluma: you pointed in the right direction.
Thank you all for your contributions.
rolfie
#662 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-29 13:33:04
Ok, gave that option a try. /etc/default/grub was changed to:
GRUB_CMDLINE_LINUX_DEFAULT="quiet noefi"and the efivars line in the fstab commented out. I guess the option does what is suppoed to happen:
# efibootmgr
EFI variables are not supported on this system.
~# mount -t efivarfs -o remount,ro efivarfs /sys/firmware/efi/efivars
mount: /sys/firmware/efi/efivars: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
~# mount -t efivarfs -o ro efivarfs /sys/firmware/efi/efivars
mount: /sys/firmware/efi/efivars: unknown filesystem type 'efivarfs'.
dmesg(1) may have more information after failed mount system call.
~# efibootmgr
EFI variables are not supported on this system.dmesg stops after about 25s past boot. messages is no more updated for some reason, what I see there are files from about 2 months ago. And syslog is not showing any mount related stuff.
2022-11-29T13:19:47.945512+01:00 CRON[2945]: (CRON) info (No MTA installed, discarding output)
2022-11-29T13:20:01.389977+01:00 dbus-daemon[3909]: [session uid=0 pid=3907] Activating service name='org.gnome.Terminal' requested by ':1.0' (uid=0 pid=3875 comm="/usr/bin/gnome-terminal")
2022-11-29T13:20:01.422209+01:00 dbus-daemon[3909]: [session uid=0 pid=3907] Activating service name='org.gtk.vfs.Daemon' requested by ':1.1' (uid=0 pid=3912 comm="/usr/libexec/gnome-terminal-server")
2022-11-29T13:20:01.426593+01:00 dbus-daemon[3909]: [session uid=0 pid=3907] Successfully activated service 'org.gtk.vfs.Daemon'
2022-11-29T13:20:01.461985+01:00 dbus-daemon[3909]: [session uid=0 pid=3907] Successfully activated service 'org.gnome.Terminal'
2022-11-29T13:20:15.481977+01:00 x-session-manager[3327]: WARNING: t+31,35905s: Detected that screensaver has left the bus
2022-11-29T13:21:46.203883+01:00 dbus-daemon[3909]: [session uid=0 pid=3907] Activating service name='ca.desrt.dconf' requested by ':1.3' (uid=0 pid=3958 comm="/usr/bin/gnome-system-log")
2022-11-29T13:21:46.207594+01:00 dbus-daemon[3909]: [session uid=0 pid=3907] Successfully activated service 'ca.desrt.dconf'Opening the terminal and the log viewer is documented, but not any messages related to the two failed mount calls.
Can this kind of behaviour point into the direction of a serious bug?
Well, the approach with setting the efivars to ro via fstab does no more work. Adding the noefi as kernel parameter does work with the downside that I can't read the boot settings in efivars easily any more. Thats why I would prefer the ro variant.
#663 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-28 22:19:18
Well, took HOAS' fstab line into my fstab, still get in the boot.log:
Mon Nov 28 23:00:18 2022: Mounting local filesystems...mount: /sys/firmware/efi/efivars: efivarfs already mounted or mount point busy.
Mon Nov 28 23:00:18 2022: dmesg(1) may have more information after failed mount system call.But in dmesg and syslog I don't see any trace of this message. Looks like the time stamps do not correspond also:
[ 0.000000] Linux version 6.0.0-4-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-9) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC Debian 6.0.8-1 (2022-11-11)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.0.0-4-amd64 root=/dev/mapper/vgDsys-1_root ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009afffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009b00000-0x0000000009dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000009f10000-0x00000000bab68fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bab69000-0x00000000bbd68fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bbd69000-0x00000000c9f7efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9f7f000-0x00000000caf7efff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000caf7f000-0x00000000ccf7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccf7f000-0x00000000cdf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cdf7f000-0x00000000cdffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce000000-0x00000000ceffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fde00000-0x00000000fdefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000fff2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000020f33ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000020f340000-0x000000022fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xcdffe000 ACPI 2.0=0xcdffe014 SMBIOS=0xcb70b000 SMBIOS 3.0=0xcb709000 ESRT=0xcb707a98 MEMATTR=0xb687e018
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: Acer Aspire A515-44/Calla_RN, BIOS V1.11 10/08/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2370.620 MHz processor
[ 0.000574] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000576] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000583] last_pfn = 0x20f340 max_arch_pfn = 0x400000000
[ 0.000777] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000968] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.005280] esrt: Reserving ESRT space from 0x00000000cb707a98 to 0x00000000cb707ad0.
[ 0.005287] Using GB pages for direct mapping
[ 0.006146] RAMDISK: [mem 0x33a59000-0x35d23fff]
[ 0.006151] ACPI: Early table checksum verification disabled
[ 0.006154] ACPI: RSDP 0x00000000CDFFE014 000024 (v02 ACRSYS)
[ 0.006157] ACPI: XSDT 0x00000000CDFC5188 0000FC (v01 ACRSYS ACRPRDCT 00000002 01000013)
[ 0.006162] ACPI: FACP 0x00000000CDFEF000 00010C (v05 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006166] ACPI: DSDT 0x00000000CDFE1000 007838 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006168] ACPI: FACS 0x00000000CDF34000 000040
[ 0.006170] ACPI: UEFI 0x00000000CDF7E000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006172] ACPI: SSDT 0x00000000CDFF5000 007216 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006174] ACPI: IVRS 0x00000000CDFF4000 0001A4 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006177] ACPI: SSDT 0x00000000CDFF3000 000228 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006179] ACPI: ASF! 0x00000000CDFF1000 0000A5 (v32 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006181] ACPI: BOOT 0x00000000CDFF0000 000028 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006183] ACPI: HPET 0x00000000CDFEE000 000038 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006186] ACPI: APIC 0x00000000CDFED000 000138 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006188] ACPI: MCFG 0x00000000CDFEC000 00003C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006190] ACPI: WDAT 0x00000000CDFEA000 00017C (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006192] ACPI: WDRT 0x00000000CDFE9000 000047 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006194] ACPI: SSDT 0x00000000CDFE0000 000080 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006196] ACPI: SSDT 0x00000000CDFD9000 006564 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.006198] ACPI: VFCT 0x00000000CDFCB000 00D484 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006201] ACPI: SSDT 0x00000000CDFEB000 0000F8 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.006203] ACPI: SSDT 0x00000000CDFC9000 001500 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006205] ACPI: CRAT 0x00000000CDFC8000 000BA8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006207] ACPI: CDIT 0x00000000CDFC7000 000029 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006209] ACPI: SSDT 0x00000000CDFC6000 000C78 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006211] ACPI: SSDT 0x00000000CDFC3000 0010A5 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006213] ACPI: SSDT 0x00000000CDFBF000 0030C8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006216] ACPI: FPDT 0x00000000CDFFD000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.006218] ACPI: BGRT 0x00000000CDFBE000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006220] ACPI: WSMT 0x00000000CDFBD000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006222] ACPI: SSDT 0x00000000CDFBC000 00007D (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006224] ACPI: SSDT 0x00000000CDFBB000 000517 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.006226] ACPI: Reserving FACP table memory at [mem 0xcdfef000-0xcdfef10b]
[ 0.006227] ACPI: Reserving DSDT table memory at [mem 0xcdfe1000-0xcdfe8837]
[ 0.006228] ACPI: Reserving FACS table memory at [mem 0xcdf34000-0xcdf3403f]
[ 0.006228] ACPI: Reserving UEFI table memory at [mem 0xcdf7e000-0xcdf7e235]
[ 0.006229] ACPI: Reserving SSDT table memory at [mem 0xcdff5000-0xcdffc215]
[ 0.006230] ACPI: Reserving IVRS table memory at [mem 0xcdff4000-0xcdff41a3]
[ 0.006230] ACPI: Reserving SSDT table memory at [mem 0xcdff3000-0xcdff3227]
[ 0.006231] ACPI: Reserving ASF! table memory at [mem 0xcdff1000-0xcdff10a4]
[ 0.006232] ACPI: Reserving BOOT table memory at [mem 0xcdff0000-0xcdff0027]
[ 0.006232] ACPI: Reserving HPET table memory at [mem 0xcdfee000-0xcdfee037]
[ 0.006233] ACPI: Reserving APIC table memory at [mem 0xcdfed000-0xcdfed137]
[ 0.006234] ACPI: Reserving MCFG table memory at [mem 0xcdfec000-0xcdfec03b]
[ 0.006234] ACPI: Reserving WDAT table memory at [mem 0xcdfea000-0xcdfea17b]
[ 0.006235] ACPI: Reserving WDRT table memory at [mem 0xcdfe9000-0xcdfe9046]
[ 0.006236] ACPI: Reserving SSDT table memory at [mem 0xcdfe0000-0xcdfe007f]
[ 0.006236] ACPI: Reserving SSDT table memory at [mem 0xcdfd9000-0xcdfdf563]
[ 0.006237] ACPI: Reserving VFCT table memory at [mem 0xcdfcb000-0xcdfd8483]
[ 0.006238] ACPI: Reserving SSDT table memory at [mem 0xcdfeb000-0xcdfeb0f7]
[ 0.006238] ACPI: Reserving SSDT table memory at [mem 0xcdfc9000-0xcdfca4ff]
[ 0.006239] ACPI: Reserving CRAT table memory at [mem 0xcdfc8000-0xcdfc8ba7]
[ 0.006240] ACPI: Reserving CDIT table memory at [mem 0xcdfc7000-0xcdfc7028]
[ 0.006240] ACPI: Reserving SSDT table memory at [mem 0xcdfc6000-0xcdfc6c77]
[ 0.006241] ACPI: Reserving SSDT table memory at [mem 0xcdfc3000-0xcdfc40a4]
[ 0.006242] ACPI: Reserving SSDT table memory at [mem 0xcdfbf000-0xcdfc20c7]
[ 0.006242] ACPI: Reserving FPDT table memory at [mem 0xcdffd000-0xcdffd043]
[ 0.006243] ACPI: Reserving BGRT table memory at [mem 0xcdfbe000-0xcdfbe037]
[ 0.006244] ACPI: Reserving WSMT table memory at [mem 0xcdfbd000-0xcdfbd027]
[ 0.006244] ACPI: Reserving SSDT table memory at [mem 0xcdfbc000-0xcdfbc07c]
[ 0.006245] ACPI: Reserving SSDT table memory at [mem 0xcdfbb000-0xcdfbb516]
[ 0.006303] No NUMA configuration found
[ 0.006304] Faking a node at [mem 0x0000000000000000-0x000000020f33ffff]
[ 0.006310] NODE_DATA(0) allocated [mem 0x20f315000-0x20f33ffff]
[ 0.006557] Zone ranges:
[ 0.006557] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006559] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006560] Normal [mem 0x0000000100000000-0x000000020f33ffff]
[ 0.006561] Device empty
[ 0.006562] Movable zone start for each node
[ 0.006564] Early memory node ranges
[ 0.006565] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.006566] node 0: [mem 0x0000000000100000-0x0000000009afffff]
[ 0.006567] node 0: [mem 0x0000000009e00000-0x0000000009efffff]
[ 0.006567] node 0: [mem 0x0000000009f10000-0x00000000bab68fff]
[ 0.006568] node 0: [mem 0x00000000bbd69000-0x00000000c9f7efff]
[ 0.006569] node 0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[ 0.006569] node 0: [mem 0x0000000100000000-0x000000020f33ffff]
[ 0.006571] Initmem setup node 0 [mem 0x0000000000001000-0x000000020f33ffff]
[ 0.006574] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006596] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.006778] On node 0, zone DMA32: 768 pages in unavailable ranges
[ 0.012064] On node 0, zone DMA32: 16 pages in unavailable ranges
[ 0.012538] On node 0, zone DMA32: 4608 pages in unavailable ranges
[ 0.012689] On node 0, zone DMA32: 16512 pages in unavailable ranges
[ 0.013036] On node 0, zone Normal: 8192 pages in unavailable ranges
[ 0.013065] On node 0, zone Normal: 3264 pages in unavailable ranges
[ 0.013425] ACPI: PM-Timer IO Port: 0x408
[ 0.013432] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.013433] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.013434] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.013434] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.013435] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.013436] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.013436] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.013437] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.013437] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.013438] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.013439] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.013439] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.013440] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.013441] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.013441] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.013442] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.013455] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[ 0.013460] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[ 0.013462] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013464] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.013468] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013469] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.013477] e820: update [mem 0xb5c9d000-0xb5d90fff] usable ==> reserved
[ 0.013488] smpboot: Allowing 16 CPUs, 10 hotplug CPUs
[ 0.013515] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.013517] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000bffff]
[ 0.013517] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.013519] PM: hibernation: Registered nosave memory: [mem 0x09b00000-0x09dfffff]
[ 0.013520] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0ffff]
[ 0.013522] PM: hibernation: Registered nosave memory: [mem 0xb5c9d000-0xb5d90fff]
[ 0.013524] PM: hibernation: Registered nosave memory: [mem 0xbab69000-0xbbd68fff]
[ 0.013525] PM: hibernation: Registered nosave memory: [mem 0xc9f7f000-0xcaf7efff]
[ 0.013526] PM: hibernation: Registered nosave memory: [mem 0xcaf7f000-0xccf7efff]
[ 0.013526] PM: hibernation: Registered nosave memory: [mem 0xccf7f000-0xcdf7efff]
[ 0.013527] PM: hibernation: Registered nosave memory: [mem 0xcdf7f000-0xcdffefff]
[ 0.013528] PM: hibernation: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.013529] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xf7ffffff]
[ 0.013529] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.013530] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfddfffff]
[ 0.013531] PM: hibernation: Registered nosave memory: [mem 0xfde00000-0xfdefffff]
[ 0.013531] PM: hibernation: Registered nosave memory: [mem 0xfdf00000-0xfebfffff]
[ 0.013532] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.013532] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.013533] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.013533] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.013534] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.013534] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.013535] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.013536] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.013536] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xfff2ffff]
[ 0.013537] PM: hibernation: Registered nosave memory: [mem 0xfff30000-0xffffffff]
[ 0.013538] [mem 0xcf000000-0xf7ffffff] available for PCI devices
[ 0.013539] Booting paravirtualized kernel on bare hardware
[ 0.013542] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.016703] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.017359] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.017368] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.017371] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.017404] Fallback order for Node 0: 0
[ 0.017407] Built 1 zonelists, mobility grouping on. Total pages: 1902265
[ 0.017408] Policy zone: Normal
[ 0.017409] Kernel command line: BOOT_IMAGE=/vmlinuz-6.0.0-4-amd64 root=/dev/mapper/vgDsys-1_root ro quiet
[ 0.017445] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.0.0-4-amd64", will be passed to user space.
[ 0.018379] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.018858] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018911] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.018953] software IO TLB: area num 16.
[ 0.043031] Memory: 3262208K/7730488K available (12294K kernel code, 2264K rwdata, 8860K rodata, 2732K init, 5404K bss, 334764K reserved, 0K cma-reserved)
[ 0.043889] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.043922] ftrace: allocating 39267 entries in 154 pages
[ 0.049586] ftrace: allocated 154 pages with 4 groups
[ 0.050172] Dynamic Preempt: voluntary
[ 0.050244] rcu: Preemptible hierarchical RCU implementation.
[ 0.050245] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.050246] Trampoline variant of Tasks RCU enabled.
[ 0.050246] Rude variant of Tasks RCU enabled.
[ 0.050247] Tracing variant of Tasks RCU enabled.
[ 0.050247] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.050248] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.053797] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[ 0.053989] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.054037] random: crng init done
[ 0.054060] Console: colour dummy device 80x25
[ 0.054075] printk: console [tty0] enabled
[ 0.054089] ACPI: Core revision 20220331
[ 0.054267] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.054284] APIC: Switch to symmetric I/O mode setup
[ 0.055256] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[ 0.055258] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[ 0.055259] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[ 0.055260] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[ 0.055261] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[ 0.055549] Switched APIC routing to physical flat.
[ 0.056283] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074292] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x222bcd4293a, max_idle_ns: 440795294175 ns
[ 0.074300] Calibrating delay loop (skipped), value calculated using timer frequency.. 4741.24 BogoMIPS (lpj=9482480)
[ 0.074302] pid_max: default: 32768 minimum: 301
[ 0.078326] LSM: Security Framework initializing
[ 0.078340] landlock: Up and running.
[ 0.078341] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.078365] AppArmor: AppArmor initialized
[ 0.078367] TOMOYO Linux initialized
[ 0.078371] LSM support for eBPF active
[ 0.078395] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.078404] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.078585] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.078615] LVT offset 1 assigned for vector 0xf9
[ 0.078676] LVT offset 2 assigned for vector 0xf4
[ 0.078693] process: using mwait in idle threads
[ 0.078695] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.078696] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.078700] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.078701] Spectre V2 : Mitigation: Retpolines
[ 0.078702] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.078703] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.078703] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.078704] RETBleed: Mitigation: untrained return thunk
[ 0.078705] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.078706] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.087397] Freeing SMP alternatives memory: 32K
[ 0.199413] smpboot: CPU0: AMD Ryzen 5 4500U with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1)
[ 0.199526] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.199529] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.199545] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.199559] cblist_init_generic: Setting shift to 4 and lim to 1.
[ 0.199572] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.199577] ... version: 0
[ 0.199577] ... bit width: 48
[ 0.199578] ... generic registers: 6
[ 0.199578] ... value mask: 0000ffffffffffff
[ 0.199579] ... max period: 00007fffffffffff
[ 0.199580] ... fixed-purpose events: 0
[ 0.199580] ... event mask: 000000000000003f
[ 0.199649] rcu: Hierarchical SRCU implementation.
[ 0.199650] rcu: Max phase no-delay instances is 1000.
[ 0.200020] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.200153] smp: Bringing up secondary CPUs ...
[ 0.200227] x86: Booting SMP configuration:
[ 0.200227] .... node #0, CPUs: #1 #2 #3
[ 0.204664] TSC synchronization [CPU#0 -> CPU#3]:
[ 0.204666] Measured 3563 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.204668] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.206371] #4 #5
[ 0.206610] smp: Brought up 1 node, 6 CPUs
[ 0.206610] smpboot: Max logical packages: 3
[ 0.206610] smpboot: Total of 6 processors activated (28447.44 BogoMIPS)
[ 0.212232] node 0 deferred pages initialised in 4ms
[ 0.214437] devtmpfs: initialized
[ 0.214437] x86/mm: Memory block size: 128MB
[ 0.214847] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0ffff] (65536 bytes)
[ 0.214847] ACPI: PM: Registering ACPI NVS region [mem 0xccf7f000-0xcdf7efff] (16777216 bytes)
[ 0.214847] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.214847] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.214847] pinctrl core: initialized pinctrl subsystem
[ 0.215119] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.215272] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.215370] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.215473] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.215489] audit: initializing netlink subsys (disabled)
[ 0.215502] audit: type=2000 audit(1669672800.160:1): state=initialized audit_enabled=0 res=1
[ 0.215502] thermal_sys: Registered thermal governor 'fair_share'
[ 0.215502] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.215502] thermal_sys: Registered thermal governor 'step_wise'
[ 0.215502] thermal_sys: Registered thermal governor 'user_space'
[ 0.215502] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.215502] cpuidle: using governor ladder
[ 0.215502] cpuidle: using governor menu
[ 0.215502] Simple Boot Flag at 0x44 set to 0x1
[ 0.215502] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.215502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.215502] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.215502] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.215502] PCI: Using configuration type 1 for base access
[ 0.215502] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.215502] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.215502] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.215502] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.215502] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.215502] ACPI: Added _OSI(Module Device)
[ 0.215502] ACPI: Added _OSI(Processor Device)
[ 0.215502] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.215502] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.215502] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.215502] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.215502] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.224433] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.225481] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.226819] ACPI: EC: EC started
[ 0.226820] ACPI: EC: interrupt blocked
[ 0.228496] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.228498] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[ 0.228499] ACPI: Interpreter enabled
[ 0.228512] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.228513] ACPI: Using IOAPIC for interrupt routing
[ 0.228629] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.228630] PCI: Using E820 reservations for host bridge windows
[ 0.228902] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.229705] ACPI: PM: Power Resource [WRST]
[ 0.230722] ACPI: PM: Power Resource [P0S0]
[ 0.230743] ACPI: PM: Power Resource [P3S0]
[ 0.230815] ACPI: PM: Power Resource [P0S1]
[ 0.230835] ACPI: PM: Power Resource [P3S1]
[ 0.233570] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.233574] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.233624] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.233707] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.233708] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.233716] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.233945] PCI host bridge to bus 0000:00
[ 0.233946] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.233947] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.233949] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.233950] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[ 0.233951] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[ 0.233952] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[ 0.233953] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[ 0.233954] pci_bus 0000:00: root bus resource [mem 0x250200000-0xfcffffffff window]
[ 0.233955] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.233967] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[ 0.234032] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[ 0.234097] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[ 0.234151] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
[ 0.234323] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.234455] pci 0000:00:01.2: [1022:1634] type 01 class 0x060400
[ 0.234512] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.234578] pci 0000:00:01.3: [1022:1634] type 01 class 0x060400
[ 0.234633] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.234711] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[ 0.234756] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
[ 0.234814] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.234900] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[ 0.234947] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[ 0.234967] pci 0000:00:08.1: enabling Extended Tags
[ 0.234995] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.235070] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400
[ 0.235091] pci 0000:00:08.2: enabling Extended Tags
[ 0.235118] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.235198] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.235303] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.235422] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000
[ 0.235448] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000
[ 0.235475] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000
[ 0.235500] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000
[ 0.235529] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000
[ 0.235554] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000
[ 0.235580] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000
[ 0.235606] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000
[ 0.235692] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.235737] pci 0000:02:00.0: [c0a9:5412] type 00 class 0x010802
[ 0.235752] pci 0000:02:00.0: reg 0x10: [mem 0xd0800000-0xd0803fff 64bit]
[ 0.235898] pci 0000:00:01.2: PCI bridge to [bus 02]
[ 0.235902] pci 0000:00:01.2: bridge window [mem 0xd0800000-0xd08fffff]
[ 0.235941] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.235958] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.235980] pci 0000:03:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit]
[ 0.235994] pci 0000:03:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit]
[ 0.236080] pci 0000:03:00.0: supports D1 D2
[ 0.236080] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236183] pci 0000:00:01.3: PCI bridge to [bus 03]
[ 0.236186] pci 0000:00:01.3: bridge window [io 0x2000-0x2fff]
[ 0.236188] pci 0000:00:01.3: bridge window [mem 0xd0700000-0xd07fffff]
[ 0.236351] pci 0000:04:00.0: [168c:003e] type 00 class 0x028000
[ 0.236498] pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xd01fffff 64bit]
[ 0.237068] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.237653] pci 0000:00:02.1: PCI bridge to [bus 04]
[ 0.237657] pci 0000:00:02.1: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.237714] pci 0000:05:00.0: [1002:1636] type 00 class 0x030000
[ 0.237725] pci 0000:05:00.0: reg 0x10: [mem 0xfce0000000-0xfcefffffff 64bit pref]
[ 0.237732] pci 0000:05:00.0: reg 0x18: [mem 0xfcf0000000-0xfcf01fffff 64bit pref]
[ 0.237737] pci 0000:05:00.0: reg 0x20: [io 0x1000-0x10ff]
[ 0.237742] pci 0000:05:00.0: reg 0x24: [mem 0xd0600000-0xd067ffff]
[ 0.237750] pci 0000:05:00.0: enabling Extended Tags
[ 0.237760] pci 0000:05:00.0: BAR 0: assigned to efifb
[ 0.237796] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.237872] pci 0000:05:00.1: [1002:1637] type 00 class 0x040300
[ 0.237879] pci 0000:05:00.1: reg 0x10: [mem 0xd06c8000-0xd06cbfff]
[ 0.237899] pci 0000:05:00.1: enabling Extended Tags
[ 0.237926] pci 0000:05:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.237973] pci 0000:05:00.2: [1022:15df] type 00 class 0x108000
[ 0.237986] pci 0000:05:00.2: reg 0x18: [mem 0xd0500000-0xd05fffff]
[ 0.237995] pci 0000:05:00.2: reg 0x24: [mem 0xd06cc000-0xd06cdfff]
[ 0.238002] pci 0000:05:00.2: enabling Extended Tags
[ 0.238075] pci 0000:05:00.3: [1022:1639] type 00 class 0x0c0330
[ 0.238086] pci 0000:05:00.3: reg 0x10: [mem 0xd0400000-0xd04fffff 64bit]
[ 0.238109] pci 0000:05:00.3: enabling Extended Tags
[ 0.238137] pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
[ 0.238189] pci 0000:05:00.4: [1022:1639] type 00 class 0x0c0330
[ 0.238199] pci 0000:05:00.4: reg 0x10: [mem 0xd0300000-0xd03fffff 64bit]
[ 0.238222] pci 0000:05:00.4: enabling Extended Tags
[ 0.238250] pci 0000:05:00.4: PME# supported from D0 D3hot D3cold
[ 0.238307] pci 0000:05:00.5: [1022:15e2] type 00 class 0x048000
[ 0.238314] pci 0000:05:00.5: reg 0x10: [mem 0xd0680000-0xd06bffff]
[ 0.238334] pci 0000:05:00.5: enabling Extended Tags
[ 0.238361] pci 0000:05:00.5: PME# supported from D0 D3hot D3cold
[ 0.238409] pci 0000:05:00.6: [1022:15e3] type 00 class 0x040300
[ 0.238416] pci 0000:05:00.6: reg 0x10: [mem 0xd06c0000-0xd06c7fff]
[ 0.238436] pci 0000:05:00.6: enabling Extended Tags
[ 0.238463] pci 0000:05:00.6: PME# supported from D0 D3hot D3cold
[ 0.238527] pci 0000:00:08.1: PCI bridge to [bus 05]
[ 0.238529] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
[ 0.238531] pci 0000:00:08.1: bridge window [mem 0xd0300000-0xd06fffff]
[ 0.238534] pci 0000:00:08.1: bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]
[ 0.238573] pci 0000:06:00.0: [1022:7901] type 00 class 0x010601
[ 0.238601] pci 0000:06:00.0: reg 0x24: [mem 0xd0201000-0xd02017ff]
[ 0.238609] pci 0000:06:00.0: enabling Extended Tags
[ 0.238703] pci 0000:06:00.1: [1022:7901] type 00 class 0x010601
[ 0.238730] pci 0000:06:00.1: reg 0x24: [mem 0xd0200000-0xd02007ff]
[ 0.238738] pci 0000:06:00.1: enabling Extended Tags
[ 0.238819] pci 0000:00:08.2: PCI bridge to [bus 06]
[ 0.238823] pci 0000:00:08.2: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.239195] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.239197] ACPI: PCI: Interrupt link LNKA disabled
[ 0.239247] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.239247] ACPI: PCI: Interrupt link LNKB disabled
[ 0.239284] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.239285] ACPI: PCI: Interrupt link LNKC disabled
[ 0.239333] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.239333] ACPI: PCI: Interrupt link LNKD disabled
[ 0.239377] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.239377] ACPI: PCI: Interrupt link LNKE disabled
[ 0.239412] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.239412] ACPI: PCI: Interrupt link LNKF disabled
[ 0.239446] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.239447] ACPI: PCI: Interrupt link LNKG disabled
[ 0.239481] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.239482] ACPI: PCI: Interrupt link LNKH disabled
[ 0.239936] ACPI: EC: interrupt unblocked
[ 0.239937] ACPI: EC: event unblocked
[ 0.239941] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.239942] ACPI: EC: GPE=0x3
[ 0.239943] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[ 0.239945] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[ 0.239983] iommu: Default domain type: Translated
[ 0.239983] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.240361] EDAC MC: Ver: 3.0.0
[ 0.240492] Registered efivars operations
[ 0.242409] NetLabel: Initializing
[ 0.242409] NetLabel: domain hash size = 128
[ 0.242410] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.242421] NetLabel: unlabeled traffic allowed by default
[ 0.242422] PCI: Using ACPI for IRQ routing
[ 0.244379] PCI: pci_cache_line_size set to 64 bytes
[ 0.244555] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.244556] e820: reserve RAM buffer [mem 0x09b00000-0x0bffffff]
[ 0.244557] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
[ 0.244558] e820: reserve RAM buffer [mem 0xb5c9d000-0xb7ffffff]
[ 0.244559] e820: reserve RAM buffer [mem 0xbab69000-0xbbffffff]
[ 0.244560] e820: reserve RAM buffer [mem 0xc9f7f000-0xcbffffff]
[ 0.244561] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.244561] e820: reserve RAM buffer [mem 0x20f340000-0x20fffffff]
[ 0.244571] pci 0000:05:00.0: vgaarb: setting as boot VGA device
[ 0.244571] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.244571] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.244571] vgaarb: loaded
[ 0.244571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.244571] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.246333] clocksource: Switched to clocksource hpet
[ 0.253725] VFS: Disk quotas dquot_6.6.0
[ 0.253736] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.253850] AppArmor: AppArmor Filesystem Enabled
[ 0.253861] pnp: PnP ACPI init
[ 0.253950] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.253953] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.253955] system 00:00: [mem 0xfde00000-0xfdefffff] has been reserved
[ 0.254073] system 00:03: [io 0x0400-0x04cf] has been reserved
[ 0.254075] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.254076] system 00:03: [io 0x04d6] has been reserved
[ 0.254077] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.254078] system 00:03: [io 0x0c14] has been reserved
[ 0.254079] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 0.254080] system 00:03: [io 0x0c6c] has been reserved
[ 0.254081] system 00:03: [io 0x0c6f] has been reserved
[ 0.254082] system 00:03: [io 0x0cd0-0x0cdb] has been reserved
[ 0.254119] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.254121] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.254448] pnp: PnP ACPI: found 5 devices
[ 0.260530] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.260636] NET: Registered PF_INET protocol family
[ 0.260788] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.262995] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.263030] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.263084] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.263225] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.263292] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.263366] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.263395] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.263417] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.263464] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.263470] NET: Registered PF_XDP protocol family
[ 0.263481] pci 0000:00:01.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.263485] pci 0000:00:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.263486] pci 0000:00:01.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.263494] clipped [mem size 0x00020000] to [mem size 0x00000000] for e820 entry [mem 0x0009f000-0x000bffff]
[ 0.263497] pci 0000:00:01.1: BAR 14: assigned [mem 0xd0900000-0xd0afffff]
[ 0.263499] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffe0000 64bit pref] for e820 entry [mem 0x0009f000-0x000bffff]
[ 0.263503] pci 0000:00:01.1: BAR 15: assigned [mem 0x250200000-0x2503fffff 64bit pref]
[ 0.263506] pci 0000:00:01.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.263508] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.263511] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff]
[ 0.263516] pci 0000:00:01.1: bridge window [mem 0xd0900000-0xd0afffff]
[ 0.263519] pci 0000:00:01.1: bridge window [mem 0x250200000-0x2503fffff 64bit pref]
[ 0.263526] pci 0000:00:01.2: PCI bridge to [bus 02]
[ 0.263529] pci 0000:00:01.2: bridge window [mem 0xd0800000-0xd08fffff]
[ 0.263533] pci 0000:00:01.3: PCI bridge to [bus 03]
[ 0.263534] pci 0000:00:01.3: bridge window [io 0x2000-0x2fff]
[ 0.263536] pci 0000:00:01.3: bridge window [mem 0xd0700000-0xd07fffff]
[ 0.263540] pci 0000:00:02.1: PCI bridge to [bus 04]
[ 0.263542] pci 0000:00:02.1: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.263548] pci 0000:00:08.1: PCI bridge to [bus 05]
[ 0.263549] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff]
[ 0.263551] pci 0000:00:08.1: bridge window [mem 0xd0300000-0xd06fffff]
[ 0.263553] pci 0000:00:08.1: bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]
[ 0.263556] pci 0000:00:08.2: PCI bridge to [bus 06]
[ 0.263558] pci 0000:00:08.2: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.263563] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.263564] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.263565] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.263566] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
[ 0.263567] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[ 0.263568] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff window]
[ 0.263569] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
[ 0.263570] pci_bus 0000:00: resource 11 [mem 0x250200000-0xfcffffffff window]
[ 0.263572] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.263573] pci_bus 0000:01: resource 1 [mem 0xd0900000-0xd0afffff]
[ 0.263574] pci_bus 0000:01: resource 2 [mem 0x250200000-0x2503fffff 64bit pref]
[ 0.263575] pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd08fffff]
[ 0.263576] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.263577] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[ 0.263578] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.263579] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.263580] pci_bus 0000:05: resource 1 [mem 0xd0300000-0xd06fffff]
[ 0.263581] pci_bus 0000:05: resource 2 [mem 0xfce0000000-0xfcf01fffff 64bit pref]
[ 0.263582] pci_bus 0000:06: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.263754] pci 0000:05:00.1: D0 power state depends on 0000:05:00.0
[ 0.263764] pci 0000:05:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.266936] pci 0000:05:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.307565] pci 0000:05:00.4: quirk_usb_early_handoff+0x0/0x750 took 39674 usecs
[ 0.307582] PCI: CLS 64 bytes, default 64
[ 0.307594] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.307649] Trying to unpack rootfs image as initramfs...
[ 0.307951] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.307953] pci 0000:00:00.2: PCI INT A: not connected
[ 0.307978] pci 0000:00:01.0: Adding to iommu group 0
[ 0.307989] pci 0000:00:01.1: Adding to iommu group 1
[ 0.307998] pci 0000:00:01.2: Adding to iommu group 2
[ 0.308007] pci 0000:00:01.3: Adding to iommu group 3
[ 0.308018] pci 0000:00:02.0: Adding to iommu group 4
[ 0.308027] pci 0000:00:02.1: Adding to iommu group 5
[ 0.308042] pci 0000:00:08.0: Adding to iommu group 6
[ 0.308050] pci 0000:00:08.1: Adding to iommu group 6
[ 0.308057] pci 0000:00:08.2: Adding to iommu group 6
[ 0.308069] pci 0000:00:14.0: Adding to iommu group 7
[ 0.308076] pci 0000:00:14.3: Adding to iommu group 7
[ 0.308102] pci 0000:00:18.0: Adding to iommu group 8
[ 0.308110] pci 0000:00:18.1: Adding to iommu group 8
[ 0.308118] pci 0000:00:18.2: Adding to iommu group 8
[ 0.308125] pci 0000:00:18.3: Adding to iommu group 8
[ 0.308134] pci 0000:00:18.4: Adding to iommu group 8
[ 0.308141] pci 0000:00:18.5: Adding to iommu group 8
[ 0.308150] pci 0000:00:18.6: Adding to iommu group 8
[ 0.308158] pci 0000:00:18.7: Adding to iommu group 8
[ 0.308167] pci 0000:02:00.0: Adding to iommu group 9
[ 0.308175] pci 0000:03:00.0: Adding to iommu group 10
[ 0.308185] pci 0000:04:00.0: Adding to iommu group 11
[ 0.308197] pci 0000:05:00.0: Adding to iommu group 6
[ 0.308201] pci 0000:05:00.1: Adding to iommu group 6
[ 0.308205] pci 0000:05:00.2: Adding to iommu group 6
[ 0.308209] pci 0000:05:00.3: Adding to iommu group 6
[ 0.308215] pci 0000:05:00.4: Adding to iommu group 6
[ 0.308219] pci 0000:05:00.5: Adding to iommu group 6
[ 0.308225] pci 0000:05:00.6: Adding to iommu group 6
[ 0.308229] pci 0000:06:00.0: Adding to iommu group 6
[ 0.308233] pci 0000:06:00.1: Adding to iommu group 6
[ 0.309561] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.309565] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.309571] AMD-Vi: Interrupt remapping enabled
[ 0.309571] AMD-Vi: X2APIC enabled
[ 0.309612] AMD-Vi: Virtual APIC enabled
[ 0.309705] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.309706] software IO TLB: mapped [mem 0x00000000c55fd000-0x00000000c95fd000] (64MB)
[ 0.309737] LVT offset 0 assigned for vector 0x400
[ 0.318392] perf: AMD IBS detected (0x000003ff)
[ 0.318400] amd_uncore: 4 amd_df counters detected
[ 0.318411] amd_uncore: 6 amd_l3 counters detected
[ 0.318796] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.319631] Initialise system trusted keyrings
[ 0.319640] Key type blacklist registered
[ 0.319687] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.320559] zbud: loaded
[ 0.320711] integrity: Platform Keyring initialized
[ 0.320712] Key type asymmetric registered
[ 0.320713] Asymmetric key parser 'x509' registered
[ 0.567242] Freeing initrd memory: 35628K
[ 0.571602] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.571621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.571667] io scheduler mq-deadline registered
[ 0.573773] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[ 0.573793] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.574012] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[ 0.574118] pcieport 0000:00:01.3: PME: Signaling with IRQ 28
[ 0.574212] pcieport 0000:00:02.1: PME: Signaling with IRQ 29
[ 0.574317] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[ 0.574464] pcieport 0000:00:08.2: PME: Signaling with IRQ 31
[ 0.574543] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.574574] Monitor-Mwait will be used to enter C-1 state
[ 0.574578] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 0.574584] ACPI: FW issue: working around C-state latencies out of order
[ 0.574654] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 0.574658] ACPI: FW issue: working around C-state latencies out of order
[ 0.574761] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 0.574766] ACPI: FW issue: working around C-state latencies out of order
[ 0.574866] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 0.574871] ACPI: FW issue: working around C-state latencies out of order
[ 0.574940] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 0.574944] ACPI: FW issue: working around C-state latencies out of order
[ 0.575009] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 0.575014] ACPI: FW issue: working around C-state latencies out of order
[ 0.575313] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.575314] ACPI: thermal: Thermal Zone [TZ01] (51 C)
[ 0.575442] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.575789] Linux agpgart interface v0.103
[ 0.576097] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.576480] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 0.576482] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.577285] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.577379] mousedev: PS/2 mouse device common for all mice
[ 0.577408] rtc_cmos 00:01: RTC can wake from S4
[ 0.577625] rtc_cmos 00:01: registered as rtc0
[ 0.577659] rtc_cmos 00:01: setting system clock to 2022-11-28T22:00:01 UTC (1669672801)
[ 0.577669] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.577756] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.577823] efifb: probing for efifb
[ 0.577848] efifb: framebuffer at 0xfce0000000, using 8128k, total 8128k
[ 0.577849] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.577850] efifb: scrolling: redraw
[ 0.577851] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.577916] Console: switching to colour frame buffer device 240x67
[ 0.579212] fb0: EFI VGA frame buffer device
[ 0.587493] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.587609] NET: Registered PF_INET6 protocol family
[ 0.592096] Segment Routing with IPv6
[ 0.592115] In-situ OAM (IOAM) with IPv6
[ 0.592159] mip6: Mobile IPv6
[ 0.592161] NET: Registered PF_PACKET protocol family
[ 0.592211] mpls_gso: MPLS GSO support
[ 0.592780] microcode: CPU0: patch_level=0x08600103
[ 0.592796] microcode: CPU1: patch_level=0x08600103
[ 0.592800] microcode: CPU2: patch_level=0x08600103
[ 0.592823] microcode: CPU3: patch_level=0x08600103
[ 0.592835] microcode: CPU4: patch_level=0x08600103
[ 0.592857] microcode: CPU5: patch_level=0x08600103
[ 0.592864] microcode: Microcode Update Driver: v2.2.
[ 0.593007] resctrl: L3 allocation detected
[ 0.593008] resctrl: MB allocation detected
[ 0.593010] resctrl: L3 monitoring detected
[ 0.593016] IPI shorthand broadcast: enabled
[ 0.593214] registered taskstats version 1
[ 0.593219] Loading compiled-in X.509 certificates
[ 0.604887] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.604918] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 0.606270] zswap: loaded using pool lzo/zbud
[ 0.606533] Key type .fscrypt registered
[ 0.606535] Key type fscrypt-provisioning registered
[ 0.609869] Key type encrypted registered
[ 0.609877] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.614750] integrity: Loading X.509 certificate: UEFI:db
[ 0.614801] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.614803] integrity: Loading X.509 certificate: UEFI:db
[ 0.614831] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.614833] integrity: Loading X.509 certificate: UEFI:db
[ 0.614851] integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5'
[ 0.614852] integrity: Loading X.509 certificate: UEFI:db
[ 0.615088] alg: No test for pkcs1pad(rsa,sha1) (pkcs1pad(rsa-generic,sha1))
[ 0.615391] integrity: Loaded X.509 cert 'LINPUS: 967f81f2f4f5ac0f24fca5e42982e4ad1e56ddff'
[ 0.615395] integrity: Loading X.509 certificate: UEFI:db
[ 0.615641] integrity: Loaded X.509 cert 'Linpus: linpus.com: 2e092cab5e97a89f94a6e272ec7267c267cf4483'
[ 0.615643] integrity: Loading X.509 certificate: UEFI:db
[ 0.615894] integrity: Loaded X.509 cert 'Quanta NB4: 073d6a4c306ea5b9499e861c7ba55cde'
[ 0.619461] ima: No TPM chip found, activating TPM-bypass!
[ 0.619468] ima: Allocated hash algorithm: sha256
[ 0.619482] ima: No architecture policies found
[ 0.619508] evm: Initialising EVM extended attributes:
[ 0.619509] evm: security.selinux
[ 0.619511] evm: security.SMACK64 (disabled)
[ 0.619512] evm: security.SMACK64EXEC (disabled)
[ 0.619513] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.619514] evm: security.SMACK64MMAP (disabled)
[ 0.619515] evm: security.apparmor
[ 0.619516] evm: security.ima
[ 0.619517] evm: security.capability
[ 0.619519] evm: HMAC attrs: 0x1
[ 0.681588] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 0.682838] Freeing unused decrypted memory: 2036K
[ 0.683409] Freeing unused kernel image (initmem) memory: 2732K
[ 0.694583] Write protecting the kernel read-only data: 24576k
[ 0.695554] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.695836] Freeing unused kernel image (rodata/data gap) memory: 1380K
[ 0.726557] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.726566] Run /init as init process
[ 0.726568] with arguments:
[ 0.726569] /init
[ 0.726570] with environment:
[ 0.726571] HOME=/
[ 0.726572] TERM=linux
[ 0.726572] BOOT_IMAGE=/vmlinuz-6.0.0-4-amd64
[ 0.768129] udevd[143]: starting version 3.2.11
[ 0.768711] udevd[144]: starting eudev-3.2.11
[ 0.780591] hid: raw HID events driver (C) Jiri Kosina
[ 0.781142] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.781383] acpi device:0a: registered as cooling_device6
[ 0.781414] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input1
[ 0.783734] ACPI: battery: Slot [BAT1] (battery present)
[ 0.800748] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 0.800752] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 0.800797] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 0.800836] ACPI: bus type USB registered
[ 0.800854] usbcore: registered new interface driver usbfs
[ 0.800859] usbcore: registered new interface driver hub
[ 0.800873] usbcore: registered new device driver usb
[ 0.801336] cryptd: max_cpu_qlen set to 1000
[ 0.805362] SCSI subsystem initialized
[ 0.806825] AVX2 version of gcm_enc/dec engaged.
[ 0.806885] AES CTR mode by8 optimization enabled
[ 0.866654] input: ELAN0515:00 04F3:3142 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0515:00/0018:04F3:3142.0001/input/input2
[ 0.866808] input: ELAN0515:00 04F3:3142 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0515:00/0018:04F3:3142.0001/input/input4
[ 0.866892] hid-generic 0018:04F3:3142.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0515:00 04F3:3142] on i2c-ELAN0515:00
[ 0.877058] libata version 3.00 loaded.
[ 0.877183] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.877658] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 0.877664] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 1
[ 0.877751] xhci_hcd 0000:05:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[ 0.878028] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 0.878030] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 2
[ 0.878032] xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.878064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 0.878066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878067] usb usb1: Product: xHCI Host Controller
[ 0.878069] usb usb1: Manufacturer: Linux 6.0.0-4-amd64 xhci-hcd
[ 0.878070] usb usb1: SerialNumber: 0000:05:00.3
[ 0.878519] hub 1-0:1.0: USB hub found
[ 0.878527] hub 1-0:1.0: 4 ports detected
[ 0.879008] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.879025] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[ 0.879027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879028] usb usb2: Product: xHCI Host Controller
[ 0.879029] usb usb2: Manufacturer: Linux 6.0.0-4-amd64 xhci-hcd
[ 0.879030] usb usb2: SerialNumber: 0000:05:00.3
[ 0.879097] hub 2-0:1.0: USB hub found
[ 0.879101] hub 2-0:1.0: 2 ports detected
[ 0.879418] xhci_hcd 0000:05:00.4: xHCI Host Controller
[ 0.879422] xhci_hcd 0000:05:00.4: new USB bus registered, assigned bus number 3
[ 0.879507] xhci_hcd 0000:05:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[ 0.879759] xhci_hcd 0000:05:00.4: xHCI Host Controller
[ 0.879761] xhci_hcd 0000:05:00.4: new USB bus registered, assigned bus number 4
[ 0.879762] xhci_hcd 0000:05:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.879787] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 0.879789] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879790] usb usb3: Product: xHCI Host Controller
[ 0.879791] usb usb3: Manufacturer: Linux 6.0.0-4-amd64 xhci-hcd
[ 0.879792] usb usb3: SerialNumber: 0000:05:00.4
[ 0.879868] hub 3-0:1.0: USB hub found
[ 0.879874] hub 3-0:1.0: 4 ports detected
[ 0.879976] ahci 0000:06:00.0: version 3.0
[ 0.880139] ahci 0000:06:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.880142] ahci 0000:06:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part deso sadm sds
[ 0.880335] scsi host0: ahci
[ 0.880390] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.880406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[ 0.880407] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880408] usb usb4: Product: xHCI Host Controller
[ 0.880409] usb usb4: Manufacturer: Linux 6.0.0-4-amd64 xhci-hcd
[ 0.880410] usb usb4: SerialNumber: 0000:05:00.4
[ 0.880419] ata1: SATA max UDMA/133 abar m2048@0xd0201000 port 0xd0201100 irq 50
[ 0.880505] hub 4-0:1.0: USB hub found
[ 0.880511] hub 4-0:1.0: 2 ports detected
[ 0.880526] ahci 0000:06:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.880529] ahci 0000:06:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part deso sadm sds
[ 0.880682] scsi host1: ahci
[ 0.880724] ata2: SATA max UDMA/133 abar m2048@0xd0200000 port 0xd0200100 irq 52
[ 0.893592] r8169 0000:03:00.0 eth0: RTL8168h/8111h, b4:a9:fc:f0:49:e9, XID 541, IRQ 53
[ 0.893597] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.138557] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.138590] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.192047] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.306033] usb 3-3: New USB device found, idVendor=0bf8, idProduct=103b, bcdDevice= 1.14
[ 1.306044] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.306048] usb 3-3: Product: Fujitsu Mouse M960
[ 1.314133] usb 1-3: New USB device found, idVendor=04ca, idProduct=3016, bcdDevice= 0.01
[ 1.314143] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.354548] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.355105] ata2.00: supports DRM functions and may not be fully accessible
[ 1.355116] ata2.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133
[ 1.358811] ata2.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.362137] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv NCQ-prio
[ 1.362552] ata2.00: supports DRM functions and may not be fully accessible
[ 1.369209] ata2.00: configured for UDMA/133
[ 1.379996] scsi 1:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5
[ 1.382829] nvme 0000:02:00.0: platform quirk: setting simple suspend
[ 1.382881] nvme nvme0: pci function 0000:02:00.0
[ 1.384243] ata2.00: Enabling discard_zeroes_data
[ 1.384258] sd 1:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[ 1.384273] sd 1:0:0:0: [sda] Write Protect is off
[ 1.384275] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.384300] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.384347] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.384541] ata2.00: Enabling discard_zeroes_data
[ 1.414592] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.416432] sda: sda1 sda2 sda3
[ 1.416793] sd 1:0:0:0: [sda] supports TCG Opal
[ 1.416795] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.423684] nvme nvme0: 16/0/0 default/read/poll queues
[ 1.429046] nvme0n1: p1 p2 p3 p4 p5
[ 1.431527] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.434845] usb 4-2: New USB device found, idVendor=0781, idProduct=5588, bcdDevice= 1.00
[ 1.434851] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.434854] usb 4-2: Product: USB Extreme Pro
[ 1.434857] usb 4-2: Manufacturer: SanDisk
[ 1.434859] usb 4-2: SerialNumber: 11311678B9F0
[ 1.446354] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 1.562565] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1.626370] usb 1-4: New USB device found, idVendor=04f3, idProduct=0c4f, bcdDevice= 1.61
[ 1.626384] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.626388] usb 1-4: Product: ELAN:Fingerprint
[ 1.626391] usb 1-4: Manufacturer: ELAN
[ 1.721743] usb 3-4: New USB device found, idVendor=0408, idProduct=a061, bcdDevice= 0.04
[ 1.721754] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.721758] usb 3-4: Product: HD User Facing
[ 1.721761] usb 3-4: Manufacturer: SunplusIT Inc
[ 1.752154] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 1.752356] scsi host2: usb-storage 4-2:1.0
[ 1.752417] usbcore: registered new interface driver usb-storage
[ 1.753528] usbcore: registered new interface driver uas
[ 1.753920] input: Fujitsu Mouse M960 as /devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-3/3-3:1.0/0003:0BF8:103B.0002/input/input5
[ 1.754025] hid-generic 0003:0BF8:103B.0002: input,hidraw1: USB HID v1.11 Mouse [Fujitsu Mouse M960] on usb-0000:05:00.4-3/input0
[ 1.759586] hid-generic 0003:0BF8:103B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Fujitsu Mouse M960] on usb-0000:05:00.4-3/input1
[ 1.759673] usbcore: registered new interface driver usbhid
[ 1.759676] usbhid: USB HID core driver
[ 1.824452] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.824478] device-mapper: uevent: version 1.0.3
[ 1.824547] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 2.771348] scsi 2:0:0:0: Direct-Access SanDisk Extreme Pro 0 PQ: 0 ANSI: 6
[ 2.771653] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.771826] sd 2:0:0:0: [sdb] 500170752 512-byte logical blocks: (256 GB/239 GiB)
[ 2.772110] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.772113] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2.772402] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.778924] sdb: sdb1
[ 2.779154] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6.204624] PM: Image not found (code -22)
[ 6.294135] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: none.
[ 6.338818] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 6.663821] udevd[966]: starting version 3.2.11
[ 6.673294] udevd[967]: starting eudev-3.2.11
[ 6.690974] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.691004] ACPI: button: Power Button [PWRB]
[ 6.693858] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 6.693932] ACPI: button: Sleep Button [SLPB]
[ 6.693958] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 6.693973] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
[ 6.693989] ACPI: button: Lid Switch [LID0]
[ 6.694023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 6.694214] acpi_cpufreq: overriding BIOS provided _PSD data
[ 6.706428] ACPI: button: Power Button [PWRF]
[ 6.707985] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/10251229:00/input/input10
[ 6.742571] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[ 6.766296] ACPI: bus type drm_connector registered
[ 6.770328] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 6.785210] ccp 0000:05:00.2: enabling device (0000 -> 0002)
[ 6.785347] ccp 0000:05:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[ 6.792468] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 6.795488] ccp 0000:05:00.2: tee enabled
[ 6.795491] ccp 0000:05:00.2: psp enabled
[ 6.824452] udevd[1058]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-4 1 3': No such file or directory
[ 6.831568] udevd[1068]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-3 3 2': No such file or directory
[ 6.839261] udevd[1072]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-4 3 3': No such file or directory
[ 6.843858] mc: Linux media interface: v0.10
[ 6.851845] snd_hda_intel 0000:05:00.1: enabling device (0000 -> 0002)
[ 6.851973] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[ 6.852139] snd_hda_intel 0000:05:00.6: enabling device (0000 -> 0002)
[ 6.855421] videodev: Linux video capture interface: v2.00
[ 6.861513] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:05:00.1/sound/card0/input11
[ 6.862607] udevd[1075]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb4/4-2 4 2': No such file or directory
[ 6.916298] Bluetooth: Core ver 2.22
[ 6.916318] NET: Registered PF_BLUETOOTH protocol family
[ 6.916319] Bluetooth: HCI device and connection manager initialized
[ 6.916324] Bluetooth: HCI socket layer initialized
[ 6.916326] Bluetooth: L2CAP socket layer initialized
[ 6.916330] Bluetooth: SCO socket layer initialized
[ 6.916841] usb 3-4: Found UVC 1.00 device HD User Facing (0408:a061)
[ 6.918837] snd_rn_pci_acp3x 0000:05:00.5: enabling device (0000 -> 0002)
[ 6.922292] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.922296] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.922304] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.922306] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.922307] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.922308] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 6.926358] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 6.926449] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.926663] usbcore: registered new interface driver btusb
[ 6.926739] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 6.936210] input: HD User Facing: HD User Facing as /devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-4/3-4:1.0/input/input13
[ 6.936263] usbcore: registered new interface driver uvcvideo
[ 6.939098] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 6.956500] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 6.956523] acer_wmi: Function bitmap for Communication Button: 0x801
[ 6.960813] input: Acer WMI hotkeys as /devices/virtual/input/input14
[ 6.970474] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1/input12
[ 6.970519] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:05:00.6/sound/card1/input15
[ 6.970799] r8169 0000:03:00.0 eth0: Link is Down
[ 6.970959] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.971222] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 6.971356] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 6.971466] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.972131] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 6.972637] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 7.975443] [drm] amdgpu kernel modesetting enabled.
[ 7.976865] amdgpu: Virtual CRAT table created for CPU
[ 7.976877] amdgpu: Topology: Add CPU node
[ 7.977042] Console: switching to colour dummy device 80x25
[ 7.977077] amdgpu 0000:05:00.0: vgaarb: deactivate vga console
[ 7.977117] amdgpu 0000:05:00.0: enabling device (0006 -> 0007)
[ 7.977159] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x1025:0x1461 0xC3).
[ 7.977660] [drm] register mmio base: 0xD0600000
[ 7.977661] [drm] register mmio size: 524288
[ 7.979254] [drm] add ip block number 0 <soc15_common>
[ 7.979256] [drm] add ip block number 1 <gmc_v9_0>
[ 7.979257] [drm] add ip block number 2 <vega10_ih>
[ 7.979258] [drm] add ip block number 3 <psp>
[ 7.979258] [drm] add ip block number 4 <smu>
[ 7.979259] [drm] add ip block number 5 <dm>
[ 7.979260] [drm] add ip block number 6 <gfx_v9_0>
[ 7.979261] [drm] add ip block number 7 <sdma_v4_0>
[ 7.979262] [drm] add ip block number 8 <vcn_v2_0>
[ 7.979263] [drm] add ip block number 9 <jpeg_v2_0>
[ 7.979281] amdgpu 0000:05:00.0: amdgpu: Fetched VBIOS from VFCT
[ 7.979283] amdgpu: ATOM BIOS: 113-RENOIR-025
[ 7.979917] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_sdma.bin
[ 7.979920] [drm] VCN decode is enabled in VM mode
[ 7.979921] [drm] VCN encode is enabled in VM mode
[ 7.979921] [drm] JPEG decode is enabled in VM mode
[ 7.979922] amdgpu 0000:05:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[ 7.979924] amdgpu 0000:05:00.0: amdgpu: PCIE atomic ops is not supported
[ 7.979930] amdgpu 0000:05:00.0: amdgpu: MODE2 reset
[ 7.980413] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 7.980418] amdgpu 0000:05:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 7.980420] amdgpu 0000:05:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 7.980422] amdgpu 0000:05:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[ 7.980426] [drm] Detected VRAM RAM=512M, BAR=512M
[ 7.980427] [drm] RAM width 128bits DDR4
[ 7.980468] [drm] amdgpu: 512M of VRAM memory ready
[ 7.980469] [drm] amdgpu: 3658M of GTT memory ready.
[ 7.980476] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 7.980596] [drm] PCIE GART of 1024M enabled.
[ 7.980597] [drm] PTB located at 0x000000F400A00000
[ 7.981362] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_asd.bin
[ 7.981601] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_ta.bin
[ 7.981604] amdgpu 0000:05:00.0: amdgpu: PSP runtime database doesn't exist
[ 7.981605] amdgpu 0000:05:00.0: amdgpu: PSP runtime database doesn't exist
[ 7.982272] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_dmcub.bin
[ 7.982274] [drm] Loading DMUB firmware via PSP: version=0x0101001F
[ 7.982634] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_pfp.bin
[ 7.982919] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_me.bin
[ 7.983171] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_ce.bin
[ 7.983448] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_rlc.bin
[ 7.984176] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_mec.bin
[ 7.985739] amdgpu 0000:05:00.0: firmware: direct-loading firmware amdgpu/renoir_vcn.bin
[ 7.985743] [drm] Found VCN firmware Version ENC: 1.17 DEC: 5 VEP: 0 Revision: 2
[ 7.985748] amdgpu 0000:05:00.0: amdgpu: Will use PSP to load VCN firmware
[ 8.039646] ath10k_pci 0000:04:00.0: enabling device (0000 -> 0002)
[ 8.040836] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.202715] pstore: Using crash dump compression: deflate
[ 8.210229] pstore: Registered efi as persistent store backend
[ 8.246978] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 8.280585] input: ELAN0515:00 04F3:3142 Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0515:00/0018:04F3:3142.0001/input/input17
[ 8.280777] input: ELAN0515:00 04F3:3142 Touchpad as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0515:00/0018:04F3:3142.0001/input/input19
[ 8.280937] hid-multitouch 0018:04F3:3142.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0515:00 04F3:3142] on i2c-ELAN0515:00
[ 8.351600] ath10k_pci 0000:04:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:04:00.0.bin (-2)
[ 8.351613] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 8.351631] ath10k_pci 0000:04:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:04:00.0.bin (-2)
[ 8.351650] ath10k_pci 0000:04:00.0: firmware: failed to load ath10k/cal-pci-0000:04:00.0.bin (-2)
[ 8.351664] ath10k_pci 0000:04:00.0: firmware: failed to load ath10k/cal-pci-0000:04:00.0.bin (-2)
[ 8.353596] ath10k_pci 0000:04:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
[ 8.353603] ath10k_pci 0000:04:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 11ad:0807
[ 8.353608] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 8.354376] ath10k_pci 0000:04:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c
[ 8.419540] ath10k_pci 0000:04:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[ 8.419895] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id N/A crc32 62812cba
[ 8.494852] ath10k_pci 0000:04:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 8.596235] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 8.596242] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.596994] ath: EEPROM regdomain: 0x6c
[ 8.597001] ath: EEPROM indicates we should expect a direct regpair map
[ 8.597004] ath: Country alpha2 being used: 00
[ 8.597006] ath: Regpair used: 0x6c
[ 8.598074] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
[ 8.664096] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 8.670852] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 8.670855] amdgpu 0000:05:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 8.671099] amdgpu 0000:05:00.0: amdgpu: SMU is initialized successfully!
[ 8.671917] [drm] Display Core initialized with v3.2.198!
[ 8.672469] [drm] DMUB hardware initialized: version=0x0101001F
[ 8.700394] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 8.724161] SVM: TSC scaling supported
[ 8.724167] kvm: Nested Virtualization enabled
[ 8.724168] SVM: kvm: Nested Paging enabled
[ 8.724177] SVM: Virtual VMLOAD VMSAVE supported
[ 8.724177] SVM: Virtual GIF supported
[ 8.724178] SVM: LBR virtualization supported
[ 8.732526] MCE: In-kernel MCE decoding enabled.
[ 8.875994] [drm] kiq ring mec 2 pipe 1 q 0
[ 8.878408] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 8.878426] [drm] JPEG decode initialized successfully.
[ 8.880192] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 8.880248] amdgpu: sdma_bitmap: 3
[ 8.880269] amdgpu: SRAT table not found
[ 8.880270] amdgpu: Virtual CRAT table created for GPU
[ 8.880326] amdgpu: Topology: Add dGPU node [0x1636:0x1002]
[ 8.880327] kfd kfd: amdgpu: added device 1002:1636
[ 8.880336] amdgpu 0000:05:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6
[ 8.880399] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 8.880400] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 8.880401] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 8.880402] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 8.880403] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 8.880404] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 8.880405] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 8.880406] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 8.880407] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 8.880408] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 8.880409] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 8.880410] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 8.880411] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 8.880412] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 8.880413] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 8.881333] [drm] Initialized amdgpu 3.48.0 20150101 for 0000:05:00.0 on minor 0
[ 8.883725] intel_rapl_common: Found RAPL domain package
[ 8.883728] intel_rapl_common: Found RAPL domain core
[ 8.886213] fbcon: amdgpudrmfb (fb0) is primary device
[ 8.886456] [drm] DSC precompute is not needed.
[ 8.950710] Console: switching to colour frame buffer device 240x67
[ 8.969003] amdgpu 0000:05:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 9.347700] EXT4-fs (dm-2): re-mounted. Quota mode: none.
[ 10.522196] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.522226] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.721386] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Quota mode: none.
[ 17.740901] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: none.
[ 17.745353] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Quota mode: none.
[ 17.759988] Adding 15998972k swap on /dev/mapper/vgDsys-2_swap. Priority:-2 extents:1 across:15998972k SSFS
[ 18.003409] RPC: Registered named UNIX socket transport module.
[ 18.003412] RPC: Registered udp transport module.
[ 18.003413] RPC: Registered tcp transport module.
[ 18.003414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.015667] FS-Cache: Loaded
[ 18.258592] audit: type=1400 audit(1669672819.104:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=2534 comm="apparmor_parser"
[ 18.258895] audit: type=1400 audit(1669672819.104:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=2537 comm="apparmor_parser"
[ 18.258899] audit: type=1400 audit(1669672819.104:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=2537 comm="apparmor_parser"
[ 18.258900] audit: type=1400 audit(1669672819.104:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=2537 comm="apparmor_parser"
[ 18.259501] audit: type=1400 audit(1669672819.104:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=2535 comm="apparmor_parser"
[ 18.259504] audit: type=1400 audit(1669672819.104:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=2535 comm="apparmor_parser"
[ 18.261444] audit: type=1400 audit(1669672819.104:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=2533 comm="apparmor_parser"
[ 18.261448] audit: type=1400 audit(1669672819.104:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=2533 comm="apparmor_parser"
[ 18.261946] audit: type=1400 audit(1669672819.104:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=2539 comm="apparmor_parser"
[ 18.264049] audit: type=1400 audit(1669672819.108:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2538 comm="apparmor_parser"
[ 18.563387] lp: driver loaded but no devices found
[ 18.571280] ppdev: user-space parallel port driver
[ 19.212906] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.212910] Bluetooth: BNEP filters: protocol multicast
[ 19.212914] Bluetooth: BNEP socket layer initialized
[ 19.213958] Bluetooth: MGMT ver 1.22
[ 19.217168] NET: Registered PF_ALG protocol familyDon't know what to say to this.
#664 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-27 19:52:29
Thanks, interesting read. But thats not what I am after. The remount with the full blown command in the root terminal works. I am trying to make a ro remount work from fstab.
The last resort would be a script at reboot in the crontab doing the ro remount. My prime goal is to make it work via fstab.
#665 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-27 15:59:08
Changed back to the comma separated version. Still get the same error during boot, from the log:
Sun Nov 27 16:53:51 2022: Mounting local filesystems...mount: /sys/firmware/efi/efivars: mount point not mounted or bad option.
Sun Nov 27 16:53:51 2022: dmesg(1) may have more information after failed mount system call.Searching dmesg and syslog reveals: no entry! Just get this line logged:
2022-11-27T16:53:52.478193+01:00 devuan kernel: [ 0.242663] Registered efivars operations#666 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-27 15:33:46
Well, the full specification works.
Too bad that I didn't try that. I was much too much focussed on my interpretation of the man page that specifying just the mount point on a remount should do the job. The encouraging thing is that the full spec on the console works.
The question is whats wrong with the fstab entry. I have tried ro alone, remount,ro and remount=ro, always the same message.
# To stop linux accessing the EFI variables
efivarfs /sys/firmware/efi/efivars efivarfs remount=ro 0 0#667 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-27 13:51:37
Head_on_a_Stick wrote:
rolfie wrote:I have used:
"quiet,noefi"Is that syntax correct?
No. The options should be separated with a space, like this: quiet noefi.
I'll give that a try later.
Head_on_a_Stick wrote:
rolfie wrote:I have no idea where to look for an init script that mounts the efivarfs.
Let's try
ls /etc/init.d/rolfie wrote:I just want to revert the automatic mount into a read-only via fstab. And that does not work.
That is confusing. I also mount efivarfs read-only with an fstab line in my Alpine Linux system and it works just fine there. I don't suppose that helps you though.
Ok, after some digging I found mountkernfs.sh which contains these lines:
#
# Mount efivarfs on /sys/firmware/efi/efivars if necessary
#
efivarsmnt=/sys/firmware/efi/efivars
if test -d $efivarsmnt; then
# domount is a no-op if already mounted
domount "$MNTMODE" efivarfs "" $efivarsmnt none ""
fiIn Daedalus this is working. In Chimaera to my experience efivars wasn't always started.
Edith: checked on Chimaera, this mount command isn't present in the same file on Chimaera.
Head_on_a_Stick wrote:
rolfie wrote:Strangely enough, when I try:
# mount -o remount,ro /sys/firmware/efi/efivars mount: /sys/firmware/efi/efivars: mount point not mounted or bad option. dmesg(1) may have more information after failed mount system call.While the efibootmgr is working and displays my settings, so the efivarfs must have been mounted.
Where is my mistake?
I think you might need to specify the filesystem type:
# mount -t efivarfs -o remount,ro /sys/firmware/efi/efivarsIf that doesn't work then check dmesg, as suggested in the error.
Tried again:
# mount -t efivarfs -o remount,ro /sys/firmware/efi/efivars
mount: /sys/firmware/efi/efivars: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.In the syslog I see:
efivarfs: Unknown parameter 'remount'No remount possible? I have copied exactly what has worked fine on Chimaera.
#668 Re: Hardware & System Configuration » [SOLVED] Daedalus and access to efivars » 2022-11-26 22:00:13
Late reply: adding a noefi past the quiet in the /etc/default/grub seems to remove the quiet or invalidates the entry, in any case I am getting lots of out during boot. The efivars error remains as is. I have used:
"quiet,noefi"Is that syntax correct?
I have no idea where to look for an init script that mounts the efivarfs. Anyhow, I think this is the desired option anyhow, I do not want to change that. I just want to revert the automatic mount into a read-only via fstab. And that does not work.
Strangely enough, when I try:
# mount -o remount,ro /sys/firmware/efi/efivars
mount: /sys/firmware/efi/efivars: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.While the efibootmgr is working and displays my settings, so the efivarfs must have been mounted.
Where is my mistake?
#669 Re: Hardware & System Configuration » [SOLVED] How is a 6700XT graphics card supposed to perform? » 2022-11-25 14:35:10
I have added a Daedalus installation in parallel to the older stuff with Cinnamon as DE. Looks like this is working perfectly, the artifacts seen under Chimaera are gone.
#670 Installation » Localisation on Daedalus previews broken » 2022-11-23 21:58:24
- rolfie
- Replies: 3
Just want to make you aware that at least the German localisation in the netinstalls currently is broken.
Got a version dated May 23rd that still is fine. Just got an issue when trying to install with a mirror that the installation of the keyring doesn't progress due to waiting for user input thats not possible in the installer (at least I have no idea how to do that). Will try again without network connection. Trying to load Daedalus to fix this issue: https://dev1galaxy.org/viewtopic.php?id=5364
Also got a version dated Sep 12th and Nov 21st. German Umlauts are not correctly displayed in menus, many menues are broken, and I guess also the German Keyboard layout is not served correctly in the password dialogue. Shot some pictures with my camera if that helps.
rolfie
#671 Re: Hardware & System Configuration » [SOLVED] How is a 6700XT graphics card supposed to perform? » 2022-11-22 21:03:37
Openbox isn't installed, never used it.
#672 Re: Hardware & System Configuration » [SOLVED] How is a 6700XT graphics card supposed to perform? » 2022-11-22 19:09:35
The X.org log is also quite long. I checked for EE entries, there are none. Just a few WW entries about a missing cyrrilic directory and other of that sort.
How do I disable the compositor? I am using a default Cinnamon installation.
BTW: is there a howto how to post an image?
#673 Re: Hardware & System Configuration » [SOLVED] How is a 6700XT graphics card supposed to perform? » 2022-11-22 19:01:47
# glxinfo -B
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: AMD (0x1002)
Device: AMD NAVY_FLOUNDER (DRM 3.48.0, 6.0.0-0.deb11.2-amd64, LLVM 11.0.1) (0x73df)
Version: 20.3.5
Accelerated: yes
Video memory: 12288MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
VBO free memory - total: 11311 MB, largest block: 11311 MB
VBO free aux. memory - total: 32031 MB, largest block: 32031 MB
Texture free memory - total: 11311 MB, largest block: 11311 MB
Texture free aux. memory - total: 32031 MB, largest block: 32031 MB
Renderbuffer free memory - total: 11311 MB, largest block: 11311 MB
Renderbuffer free aux. memory - total: 32031 MB, largest block: 32031 MB
Memory info (GL_NVX_gpu_memory_info):
Dedicated video memory: 12288 MB
Total available memory: 44400 MB
Currently available dedicated video memory: 11311 MB
OpenGL vendor string: AMD
OpenGL renderer string: AMD NAVY_FLOUNDER (DRM 3.48.0, 6.0.0-0.deb11.2-amd64, LLVM 11.0.1)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 20.3.5
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 20.3.5
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 20.3.5
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20# dmesg|grep firmware
[ 0.232156] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 12.536382] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_sos.bin
[ 12.536756] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_ta.bin
[ 14.604015] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_smc.bin
[ 14.604417] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_dmcub.bin
[ 14.604420] [drm] Loading DMUB firmware via PSP: version=0x02020013
[ 14.604818] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_pfp.bin
[ 14.605207] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_me.bin
[ 14.605523] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_ce.bin
[ 14.605731] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_rlc.bin
[ 14.606046] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_mec.bin
[ 14.606450] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_mec2.bin
[ 14.606917] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_sdma.bin
[ 14.607582] amdgpu 0000:0c:00.0: firmware: direct-loading firmware amdgpu/navy_flounder_vcn.bin
[ 14.607584] [drm] Found VCN firmware Version ENC: 1.24 DEC: 2 VEP: 0 Revision: 0
[ 14.607590] amdgpu 0000:0c:00.0: amdgpu: Will use PSP to load VCN firmware# vainfo
error: XDG_RUNTIME_DIR not set in the environment.
libva info: VA-API version 1.10.0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/radeonsi_drv_video.so
libva info: Found init function __vaDriverInit_1_10
libva info: va_openDriver() returns 0
vainfo: VA-API version: 1.10 (libva 2.10.0)
vainfo: Driver version: Mesa Gallium driver 20.3.5 for AMD NAVY_FLOUNDER (DRM 3.48.0, 6.0.0-0.deb11.2-amd64, LLVM 11.0.1)
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileHEVCMain : VAEntrypointVLD
VAProfileHEVCMain : VAEntrypointEncSlice
VAProfileHEVCMain10 : VAEntrypointVLD
VAProfileHEVCMain10 : VAEntrypointEncSlice
VAProfileJPEGBaseline : VAEntrypointVLD
VAProfileVP9Profile0 : VAEntrypointVLD
VAProfileVP9Profile2 : VAEntrypointVLD
VAProfileNone : VAEntrypointVideoProc# VDPAU_DRIVER=radeonsi vdpauinfo
display: :0 screen: 0
API version: 1
Information string: G3DVL VDPAU Driver Shared Library version 1.0
Video surface:
name width height types
-------------------------------------------
420 16384 16384 NV12 YV12
422 16384 16384 UYVY YUYV
444 16384 16384 Y8U8V8A8 V8U8Y8A8
420_16 16384 16384
422_16 16384 16384
444_16 16384 16384
Decoder capabilities:
name level macbs width height
----------------------------------------------------
MPEG1 --- not supported ---
MPEG2_SIMPLE 3 65536 4096 4096
MPEG2_MAIN 3 65536 4096 4096
H264_BASELINE 52 65536 4096 4096
H264_MAIN 52 65536 4096 4096
H264_HIGH 52 65536 4096 4096
VC1_SIMPLE 1 65536 4096 4096
VC1_MAIN 2 65536 4096 4096
VC1_ADVANCED 4 65536 4096 4096
MPEG4_PART2_SP 3 65536 4096 4096
MPEG4_PART2_ASP 5 65536 4096 4096
DIVX4_QMOBILE --- not supported ---
DIVX4_MOBILE --- not supported ---
DIVX4_HOME_THEATER --- not supported ---
DIVX4_HD_1080P --- not supported ---
DIVX5_QMOBILE --- not supported ---
DIVX5_MOBILE --- not supported ---
DIVX5_HOME_THEATER --- not supported ---
DIVX5_HD_1080P --- not supported ---
H264_CONSTRAINED_BASELINE 0 65536 4096 4096
H264_EXTENDED --- not supported ---
H264_PROGRESSIVE_HIGH --- not supported ---
H264_CONSTRAINED_HIGH --- not supported ---
H264_HIGH_444_PREDICTIVE --- not supported ---
VP9_PROFILE_0 --- not supported ---
VP9_PROFILE_1 --- not supported ---
VP9_PROFILE_2 --- not supported ---
VP9_PROFILE_3 --- not supported ---
HEVC_MAIN 186 139264 8192 4352
HEVC_MAIN_10 186 139264 8192 4352
HEVC_MAIN_STILL --- not supported ---
HEVC_MAIN_12 --- not supported ---
HEVC_MAIN_444 --- not supported ---
HEVC_MAIN_444_10 --- not supported ---
HEVC_MAIN_444_12 --- not supported ---
Output surface:
name width height nat types
----------------------------------------------------
B8G8R8A8 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8 P010 P016 A8I8 I8A8
R8G8B8A8 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8 P010 P016 A8I8 I8A8
R10G10B10A2 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8 P010 P016 A8I8 I8A8
B10G10R10A2 16384 16384 y NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8 P010 P016 A8I8 I8A8
Bitmap surface:
name width height
------------------------------
B8G8R8A8 16384 16384
R8G8B8A8 16384 16384
R10G10B10A2 16384 16384
B10G10R10A2 16384 16384
A8 16384 16384
Video mixer:
feature name sup
------------------------------------
DEINTERLACE_TEMPORAL y
DEINTERLACE_TEMPORAL_SPATIAL -
INVERSE_TELECINE -
NOISE_REDUCTION y
SHARPNESS y
LUMA_KEY y
HIGH QUALITY SCALING - L1 y
HIGH QUALITY SCALING - L2 -
HIGH QUALITY SCALING - L3 -
HIGH QUALITY SCALING - L4 -
HIGH QUALITY SCALING - L5 -
HIGH QUALITY SCALING - L6 -
HIGH QUALITY SCALING - L7 -
HIGH QUALITY SCALING - L8 -
HIGH QUALITY SCALING - L9 -
parameter name sup min max
-----------------------------------------------------
VIDEO_SURFACE_WIDTH y 48 4096
VIDEO_SURFACE_HEIGHT y 48 4096
CHROMA_TYPE y
LAYERS y 0 4
attribute name sup min max
-----------------------------------------------------
BACKGROUND_COLOR y
CSC_MATRIX y
NOISE_REDUCTION_LEVEL y 0.00 1.00
SHARPNESS_LEVEL y -1.00 1.00
LUMA_KEY_MIN_LUMA y
LUMA_KEY_MAX_LUMA y# vulkaninfo
WARNING: [Loader Message] Code 0 : loader_scanned_icd_add: Driver /usr/lib/x86_64-linux-gnu/libvulkan_intel.so supports Vulkan 1.2, but only supports loader interface version 4. Interface version 5 or newer required to support this version of Vulkan (Policy #LDP_DRIVER_7)
WARNING: [Loader Message] Code 0 : loader_scanned_icd_add: Driver /usr/lib/x86_64-linux-gnu/libvulkan_radeon.so supports Vulkan 1.2, but only supports loader interface version 4. Interface version 5 or newer required to support this version of Vulkan (Policy #LDP_DRIVER_7)
WARNING: [Loader Message] Code 0 : loader_scanned_icd_add: Driver /usr/lib/x86_64-linux-gnu/libvulkan_lvp.so supports Vulkan 1.1, but only supports loader interface version 1. Interface version 5 or newer required to support this version of Vulkan (Policy #LDP_DRIVER_7)
WARNING: [Loader Message] Code 0 : terminator_CreateInstance: Driver /usr/lib/x86_64-linux-gnu/libvulkan_lvp.so supports interface version 1 but still exposes VkSurfaceKHR create/destroy entrypoints (Policy #LDP_DRIVER_8)
error: XDG_RUNTIME_DIR not set in the environment.
WARNING: radv is not a conformant vulkan implementation, testing use only.
WARNING: lavapipe is not a conformant vulkan implementation, testing use only.
==========
VULKANINFO
==========
Vulkan Instance Version: 1.3.224
Instance Extensions: count = 19
===============================
VK_EXT_acquire_xlib_display : extension revision 1
VK_EXT_debug_report : extension revision 8
VK_EXT_debug_utils : extension revision 2
VK_EXT_direct_mode_display : extension revision 1
VK_EXT_display_surface_counter : extension revision 1
VK_KHR_device_group_creation : extension revision 1
VK_KHR_display : extension revision 23
VK_KHR_external_fence_capabilities : extension revision 1
VK_KHR_external_memory_capabilities : extension revision 1
VK_KHR_external_semaphore_capabilities : extension revision 1
VK_KHR_get_display_properties2 : extension revision 1
VK_KHR_get_physical_device_properties2 : extension revision 1
VK_KHR_get_surface_capabilities2 : extension revision 1
VK_KHR_portability_enumeration : extension revision 1
VK_KHR_surface : extension revision 25
VK_KHR_surface_protected_capabilities : extension revision 1
VK_KHR_wayland_surface : extension revision 6
VK_KHR_xcb_surface : extension revision 6
VK_KHR_xlib_surface : extension revision 6
Layers: count = 2
=================
VK_LAYER_MESA_device_select (Linux device selection layer) Vulkan version 1.2.73, layer version 1:
Layer Extensions: count = 0
Devices: count = 2
GPU id = 0 (AMD RADV NAVY_FLOUNDER (ACO))
Layer-Device Extensions: count = 0
GPU id = 1 (llvmpipe (LLVM 11.0.1, 256 bits))
Layer-Device Extensions: count = 0
VK_LAYER_MESA_overlay (Mesa Overlay layer) Vulkan version 1.1.73, layer version 1:
Layer Extensions: count = 0
Devices: count = 2
GPU id = 0 (AMD RADV NAVY_FLOUNDER (ACO))
Layer-Device Extensions: count = 0
GPU id = 1 (llvmpipe (LLVM 11.0.1, 256 bits))
Layer-Device Extensions: count = 0
Presentable Surfaces:
=====================
GPU id : 0 (AMD RADV NAVY_FLOUNDER (ACO)):
Surface types: count = 2
VK_KHR_xcb_surface
VK_KHR_xlib_surface
Formats: count = 2
SurfaceFormat[0]:
format = FORMAT_B8G8R8A8_SRGB
colorSpace = COLOR_SPACE_SRGB_NONLINEAR_KHR
SurfaceFormat[1]:
format = FORMAT_B8G8R8A8_UNORM
colorSpace = COLOR_SPACE_SRGB_NONLINEAR_KHR
Present Modes: count = 4
PRESENT_MODE_IMMEDIATE_KHR
PRESENT_MODE_MAILBOX_KHR
PRESENT_MODE_FIFO_KHR
PRESENT_MODE_FIFO_RELAXED_KHR
VkSurfaceCapabilitiesKHR:
-------------------------
minImageCount = 3
maxImageCount = 0
currentExtent:
width = 256
height = 256
minImageExtent:
width = 256
height = 256
maxImageExtent:
width = 256
height = 256
maxImageArrayLayers = 1
supportedTransforms: count = 1
SURFACE_TRANSFORM_IDENTITY_BIT_KHR
currentTransform = SURFACE_TRANSFORM_IDENTITY_BIT_KHR
supportedCompositeAlpha: count = 2
COMPOSITE_ALPHA_OPAQUE_BIT_KHR
COMPOSITE_ALPHA_INHERIT_BIT_KHR
supportedUsageFlags: count = 5
IMAGE_USAGE_TRANSFER_SRC_BIT
IMAGE_USAGE_TRANSFER_DST_BIT
IMAGE_USAGE_SAMPLED_BIT
IMAGE_USAGE_STORAGE_BIT
IMAGE_USAGE_COLOR_ATTACHMENT_BIT
VkSurfaceCapabilities2EXT:
--------------------------
supportedSurfaceCounters: count = 0
None
VkSurfaceProtectedCapabilitiesKHR:
----------------------------------
supportsProtected = false
GPU id : 1 (llvmpipe (LLVM 11.0.1, 256 bits)):
Surface types: count = 2
VK_KHR_xcb_surface
VK_KHR_xlib_surface
Formats: count = 2
SurfaceFormat[0]:
format = FORMAT_B8G8R8A8_SRGB
colorSpace = COLOR_SPACE_SRGB_NONLINEAR_KHR
SurfaceFormat[1]:
format = FORMAT_B8G8R8A8_UNORM
colorSpace = COLOR_SPACE_SRGB_NONLINEAR_KHR
Present Modes: count = 4
PRESENT_MODE_IMMEDIATE_KHR
PRESENT_MODE_MAILBOX_KHR
PRESENT_MODE_FIFO_KHR
PRESENT_MODE_FIFO_RELAXED_KHR
VkSurfaceCapabilitiesKHR:
-------------------------
minImageCount = 3
maxImageCount = 0
currentExtent:
width = 256
height = 256
minImageExtent:
width = 256
height = 256
maxImageExtent:
width = 256
height = 256
maxImageArrayLayers = 1
supportedTransforms: count = 1
SURFACE_TRANSFORM_IDENTITY_BIT_KHR
currentTransform = SURFACE_TRANSFORM_IDENTITY_BIT_KHR
supportedCompositeAlpha: count = 2
COMPOSITE_ALPHA_OPAQUE_BIT_KHR
COMPOSITE_ALPHA_INHERIT_BIT_KHR
supportedUsageFlags: count = 5
IMAGE_USAGE_TRANSFER_SRC_BIT
IMAGE_USAGE_TRANSFER_DST_BIT
IMAGE_USAGE_SAMPLED_BIT
IMAGE_USAGE_STORAGE_BIT
IMAGE_USAGE_COLOR_ATTACHMENT_BIT
VkSurfaceCapabilities2EXT:
--------------------------
supportedSurfaceCounters: count = 0
None
VkSurfaceProtectedCapabilitiesKHR:
----------------------------------
supportsProtected = false
Device Groups:
==============
Group 0:
Properties:
physicalDevices: count = 1
AMD RADV NAVY_FLOUNDER (ACO) (ID: 0)
subsetAllocation = 0
Present Capabilities:
AMD RADV NAVY_FLOUNDER (ACO) (ID: 0):
Can present images from the following devices: count = 1
AMD RADV NAVY_FLOUNDER (ACO) (ID: 0)
Present modes: count = 1
DEVICE_GROUP_PRESENT_MODE_LOCAL_BIT_KHR
Group 1:
Properties:
physicalDevices: count = 1
llvmpipe (LLVM 11.0.1, 256 bits) (ID: 0)
subsetAllocation = 0
Present Capabilities = Group does not support VK_KHR_device_group, skipping printing present capabilities
Device Properties and Extensions:
=================================
GPU0:
VkPhysicalDeviceProperties:
---------------------------
apiVersion = 4202641 (1.2.145)
driverVersion = 83898373 (0x5003005)
vendorID = 0x1002
deviceID = 0x73df
deviceType = PHYSICAL_DEVICE_TYPE_DISCRETE_GPU
deviceName = AMD RADV NAVY_FLOUNDER (ACO)
VkPhysicalDeviceLimits:
-----------------------
maxImageDimension1D = 16384
maxImageDimension2D = 16384
maxImageDimension3D = 2048
maxImageDimensionCube = 16384
maxImageArrayLayers = 2048
maxTexelBufferElements = 4294967295
maxUniformBufferRange = 4294967295
maxStorageBufferRange = 4294967295
maxPushConstantsSize = 128
maxMemoryAllocationCount = 4294967295
maxSamplerAllocationCount = 65536
bufferImageGranularity = 0x00000040
sparseAddressSpaceSize = 0xfffffffc
maxBoundDescriptorSets = 32
maxPerStageDescriptorSamplers = 8388606
maxPerStageDescriptorUniformBuffers = 8388606
maxPerStageDescriptorStorageBuffers = 8388606
maxPerStageDescriptorSampledImages = 8388606
maxPerStageDescriptorStorageImages = 8388606
maxPerStageDescriptorInputAttachments = 8388606
maxPerStageResources = 8388606
maxDescriptorSetSamplers = 8388606
maxDescriptorSetUniformBuffers = 8388606
maxDescriptorSetUniformBuffersDynamic = 16
maxDescriptorSetStorageBuffers = 8388606
maxDescriptorSetStorageBuffersDynamic = 8
maxDescriptorSetSampledImages = 8388606
maxDescriptorSetStorageImages = 8388606
maxDescriptorSetInputAttachments = 8388606
maxVertexInputAttributes = 32
maxVertexInputBindings = 32
maxVertexInputAttributeOffset = 2047
maxVertexInputBindingStride = 2048
maxVertexOutputComponents = 128
maxTessellationGenerationLevel = 64
maxTessellationPatchSize = 32
maxTessellationControlPerVertexInputComponents = 128
maxTessellationControlPerVertexOutputComponents = 128
maxTessellationControlPerPatchOutputComponents = 120
maxTessellationControlTotalOutputComponents = 4096
maxTessellationEvaluationInputComponents = 128
maxTessellationEvaluationOutputComponents = 128
maxGeometryShaderInvocations = 127
maxGeometryInputComponents = 64
maxGeometryOutputComponents = 128
maxGeometryOutputVertices = 256
maxGeometryTotalOutputComponents = 1024
maxFragmentInputComponents = 128
maxFragmentOutputAttachments = 8
maxFragmentDualSrcAttachments = 1
maxFragmentCombinedOutputResources = 8
maxComputeSharedMemorySize = 32768
maxComputeWorkGroupCount: count = 3
65535
65535
65535
maxComputeWorkGroupInvocations = 1024
maxComputeWorkGroupSize: count = 3
1024
1024
1024
subPixelPrecisionBits = 8
subTexelPrecisionBits = 8
mipmapPrecisionBits = 8
maxDrawIndexedIndexValue = 4294967295
maxDrawIndirectCount = 4294967295
maxSamplerLodBias = 16
maxSamplerAnisotropy = 16
maxViewports = 16
maxViewportDimensions: count = 2
16384
16384
viewportBoundsRange: count = 2
-32768
32767
viewportSubPixelBits = 8
minMemoryMapAlignment = 4096
minTexelBufferOffsetAlignment = 0x00000004
minUniformBufferOffsetAlignment = 0x00000004
minStorageBufferOffsetAlignment = 0x00000004
minTexelOffset = -32
maxTexelOffset = 31
minTexelGatherOffset = -32
maxTexelGatherOffset = 31
minInterpolationOffset = -2
maxInterpolationOffset = 2
subPixelInterpolationOffsetBits = 8
maxFramebufferWidth = 16384
maxFramebufferHeight = 16384
maxFramebufferLayers = 1024
framebufferColorSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
framebufferDepthSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
framebufferStencilSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
framebufferNoAttachmentsSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
maxColorAttachments = 8
sampledImageColorSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
sampledImageIntegerSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
sampledImageDepthSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
sampledImageStencilSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
storageImageSampleCounts: count = 4
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_2_BIT
SAMPLE_COUNT_4_BIT
SAMPLE_COUNT_8_BIT
maxSampleMaskWords = 1
timestampComputeAndGraphics = true
timestampPeriod = 10
maxClipDistances = 8
maxCullDistances = 8
maxCombinedClipAndCullDistances = 8
discreteQueuePriorities = 2
pointSizeRange: count = 2
0
8191.88
lineWidthRange: count = 2
0
8191.88
pointSizeGranularity = 0.125
lineWidthGranularity = 0.125
strictLines = false
standardSampleLocations = true
optimalBufferCopyOffsetAlignment = 0x00000080
optimalBufferCopyRowPitchAlignment = 0x00000080
nonCoherentAtomSize = 0x00000040
VkPhysicalDeviceSparseProperties:
---------------------------------
residencyStandard2DBlockShape = false
residencyStandard2DMultisampleBlockShape = false
residencyStandard3DBlockShape = false
residencyAlignedMipSize = false
residencyNonResidentStrict = false
VkPhysicalDeviceConservativeRasterizationPropertiesEXT:
-------------------------------------------------------
primitiveOverestimationSize = 0
maxExtraPrimitiveOverestimationSize = 0
extraPrimitiveOverestimationSizeGranularity = 0
primitiveUnderestimation = false
conservativePointAndLineRasterization = false
degenerateTrianglesRasterized = false
degenerateLinesRasterized = false
fullyCoveredFragmentShaderInputVariable = false
conservativeRasterizationPostDepthCoverage = false
VkPhysicalDeviceCustomBorderColorPropertiesEXT:
-----------------------------------------------
maxCustomBorderColorSamplers = 4096
VkPhysicalDeviceDepthStencilResolveProperties:
----------------------------------------------
supportedDepthResolveModes: count = 4
RESOLVE_MODE_SAMPLE_ZERO_BIT
RESOLVE_MODE_AVERAGE_BIT
RESOLVE_MODE_MIN_BIT
RESOLVE_MODE_MAX_BIT
supportedStencilResolveModes: count = 3
RESOLVE_MODE_SAMPLE_ZERO_BIT
RESOLVE_MODE_MIN_BIT
RESOLVE_MODE_MAX_BIT
independentResolveNone = true
independentResolve = true
VkPhysicalDeviceDescriptorIndexingProperties:
---------------------------------------------
maxUpdateAfterBindDescriptorsInAllPools = 67108863
shaderUniformBufferArrayNonUniformIndexingNative = false
shaderSampledImageArrayNonUniformIndexingNative = false
shaderStorageBufferArrayNonUniformIndexingNative = false
shaderStorageImageArrayNonUniformIndexingNative = false
shaderInputAttachmentArrayNonUniformIndexingNative = false
robustBufferAccessUpdateAfterBind = true
quadDivergentImplicitLod = false
maxPerStageDescriptorUpdateAfterBindSamplers = 8388606
maxPerStageDescriptorUpdateAfterBindUniformBuffers = 8388606
maxPerStageDescriptorUpdateAfterBindStorageBuffers = 8388606
maxPerStageDescriptorUpdateAfterBindSampledImages = 8388606
maxPerStageDescriptorUpdateAfterBindStorageImages = 8388606
maxPerStageDescriptorUpdateAfterBindInputAttachments = 8388606
maxPerStageUpdateAfterBindResources = 8388606
maxDescriptorSetUpdateAfterBindSamplers = 8388606
maxDescriptorSetUpdateAfterBindUniformBuffers = 8388606
maxDescriptorSetUpdateAfterBindUniformBuffersDynamic = 16
maxDescriptorSetUpdateAfterBindStorageBuffers = 8388606
maxDescriptorSetUpdateAfterBindStorageBuffersDynamic = 8
maxDescriptorSetUpdateAfterBindSampledImages = 8388606
maxDescriptorSetUpdateAfterBindStorageImages = 8388606
maxDescriptorSetUpdateAfterBindInputAttachments = 8388606
VkPhysicalDeviceDiscardRectanglePropertiesEXT:
----------------------------------------------
maxDiscardRectangles = 4
VkPhysicalDeviceDriverProperties:
---------------------------------
driverID = DRIVER_ID_MESA_RADV
driverName = radv
driverInfo = Mesa 20.3.5 (ACO)
conformanceVersion = 1.2.3.0
VkPhysicalDeviceExternalMemoryHostPropertiesEXT:
------------------------------------------------
minImportedHostPointerAlignment = 0x00001000
VkPhysicalDeviceFloatControlsProperties:
----------------------------------------
denormBehaviorIndependence = SHADER_FLOAT_CONTROLS_INDEPENDENCE_32_BIT_ONLY
roundingModeIndependence = SHADER_FLOAT_CONTROLS_INDEPENDENCE_32_BIT_ONLY
shaderSignedZeroInfNanPreserveFloat16 = true
shaderSignedZeroInfNanPreserveFloat32 = true
shaderSignedZeroInfNanPreserveFloat64 = true
shaderDenormPreserveFloat16 = true
shaderDenormPreserveFloat32 = true
shaderDenormPreserveFloat64 = true
shaderDenormFlushToZeroFloat16 = true
shaderDenormFlushToZeroFloat32 = true
shaderDenormFlushToZeroFloat64 = true
shaderRoundingModeRTEFloat16 = true
shaderRoundingModeRTEFloat32 = true
shaderRoundingModeRTEFloat64 = true
shaderRoundingModeRTZFloat16 = true
shaderRoundingModeRTZFloat32 = true
shaderRoundingModeRTZFloat64 = true
VkPhysicalDeviceIDProperties:
-----------------------------
deviceUUID = 00000000-0c00-0000-0000-000000000000
driverUUID = 414d442d-4d45-5341-2d44-525600000000
deviceNodeMask = 0
deviceLUIDValid = false
VkPhysicalDeviceInlineUniformBlockPropertiesEXT:
------------------------------------------------
maxInlineUniformBlockSize = 4194304
maxPerStageDescriptorInlineUniformBlocks = 134217728
maxPerStageDescriptorUpdateAfterBindInlineUniformBlocks = 134217728
maxDescriptorSetInlineUniformBlocks = 64
maxDescriptorSetUpdateAfterBindInlineUniformBlocks = 64
VkPhysicalDeviceLineRasterizationPropertiesEXT:
-----------------------------------------------
lineSubPixelPrecisionBits = 4
VkPhysicalDeviceMaintenance3Properties:
---------------------------------------
maxPerSetDescriptors = 22369621
maxMemoryAllocationSize = 0xfffffffc
VkPhysicalDeviceMultiviewProperties:
------------------------------------
maxMultiviewViewCount = 8
maxMultiviewInstanceIndex = 2147483647
VkPhysicalDevicePCIBusInfoPropertiesEXT:
----------------------------------------
pciDomain = 0
pciBus = 12
pciDevice = 0
pciFunction = 0
VkPhysicalDevicePointClippingProperties:
----------------------------------------
pointClippingBehavior = POINT_CLIPPING_BEHAVIOR_ALL_CLIP_PLANES
VkPhysicalDeviceProtectedMemoryProperties:
------------------------------------------
protectedNoFault = false
VkPhysicalDevicePushDescriptorPropertiesKHR:
--------------------------------------------
maxPushDescriptors = 32
VkPhysicalDeviceRobustness2PropertiesEXT:
-----------------------------------------
robustStorageBufferAccessSizeAlignment = 0x00000004
robustUniformBufferAccessSizeAlignment = 0x00000004
VkPhysicalDeviceSamplerFilterMinmaxProperties:
----------------------------------------------
filterMinmaxSingleComponentFormats = true
filterMinmaxImageComponentMapping = true
VkPhysicalDeviceSubgroupProperties:
-----------------------------------
subgroupSize = 64
supportedStages: count = 8
SHADER_STAGE_VERTEX_BIT
SHADER_STAGE_TESSELLATION_CONTROL_BIT
SHADER_STAGE_TESSELLATION_EVALUATION_BIT
SHADER_STAGE_GEOMETRY_BIT
SHADER_STAGE_FRAGMENT_BIT
SHADER_STAGE_COMPUTE_BIT
SHADER_STAGE_ALL_GRAPHICS
SHADER_STAGE_ALL
supportedOperations: count = 8
SUBGROUP_FEATURE_BASIC_BIT
SUBGROUP_FEATURE_VOTE_BIT
SUBGROUP_FEATURE_ARITHMETIC_BIT
SUBGROUP_FEATURE_BALLOT_BIT
SUBGROUP_FEATURE_SHUFFLE_BIT
SUBGROUP_FEATURE_SHUFFLE_RELATIVE_BIT
SUBGROUP_FEATURE_CLUSTERED_BIT
SUBGROUP_FEATURE_QUAD_BIT
quadOperationsInAllStages = true
VkPhysicalDeviceSubgroupSizeControlPropertiesEXT:
-------------------------------------------------
minSubgroupSize = 32
maxSubgroupSize = 64
maxComputeWorkgroupSubgroups = 4294967295
requiredSubgroupSizeStages: count = 2
SHADER_STAGE_COMPUTE_BIT
SHADER_STAGE_ALL
VkPhysicalDeviceTexelBufferAlignmentPropertiesEXT:
--------------------------------------------------
storageTexelBufferOffsetAlignmentBytes = 0x00000004
storageTexelBufferOffsetSingleTexelAlignment = true
uniformTexelBufferOffsetAlignmentBytes = 0x00000004
uniformTexelBufferOffsetSingleTexelAlignment = true
VkPhysicalDeviceTimelineSemaphoreProperties:
--------------------------------------------
maxTimelineSemaphoreValueDifference = 18446744073709551615
VkPhysicalDeviceTransformFeedbackPropertiesEXT:
-----------------------------------------------
maxTransformFeedbackStreams = 4
maxTransformFeedbackBuffers = 4
maxTransformFeedbackBufferSize = 0xffffffff
maxTransformFeedbackStreamDataSize = 512
maxTransformFeedbackBufferDataSize = 4294967295
maxTransformFeedbackBufferDataStride = 512
transformFeedbackQueries = true
transformFeedbackStreamsLinesTriangles = true
transformFeedbackRasterizationStreamSelect = false
transformFeedbackDraw = true
VkPhysicalDeviceVertexAttributeDivisorPropertiesEXT:
----------------------------------------------------
maxVertexAttribDivisor = 4294967295
VkPhysicalDeviceVulkan11Properties:
-----------------------------------
deviceUUID = 00000000-0c00-0000-0000-000000000000
driverUUID = 414d442d-4d45-5341-2d44-525600000000
deviceNodeMask = 0
deviceLUIDValid = false
subgroupSize = 64
subgroupSupportedStages: count = 8
SHADER_STAGE_VERTEX_BIT
SHADER_STAGE_TESSELLATION_CONTROL_BIT
SHADER_STAGE_TESSELLATION_EVALUATION_BIT
SHADER_STAGE_GEOMETRY_BIT
SHADER_STAGE_FRAGMENT_BIT
SHADER_STAGE_COMPUTE_BIT
SHADER_STAGE_ALL_GRAPHICS
SHADER_STAGE_ALL
subgroupSupportedOperations: count = 8
SUBGROUP_FEATURE_BASIC_BIT
SUBGROUP_FEATURE_VOTE_BIT
SUBGROUP_FEATURE_ARITHMETIC_BIT
SUBGROUP_FEATURE_BALLOT_BIT
SUBGROUP_FEATURE_SHUFFLE_BIT
SUBGROUP_FEATURE_SHUFFLE_RELATIVE_BIT
SUBGROUP_FEATURE_CLUSTERED_BIT
SUBGROUP_FEATURE_QUAD_BIT
subgroupQuadOperationsInAllStages = true
pointClippingBehavior = POINT_CLIPPING_BEHAVIOR_ALL_CLIP_PLANES
maxMultiviewViewCount = 8
maxMultiviewInstanceIndex = 2147483647
protectedNoFault = false
maxPerSetDescriptors = 22369621
maxMemoryAllocationSize = 0xfffffffc
VkPhysicalDeviceVulkan12Properties:
-----------------------------------
driverID = DRIVER_ID_MESA_RADV
driverName = radv
driverInfo = Mesa 20.3.5 (ACO)
conformanceVersion = 1.2.3.0
denormBehaviorIndependence = SHADER_FLOAT_CONTROLS_INDEPENDENCE_32_BIT_ONLY
roundingModeIndependence = SHADER_FLOAT_CONTROLS_INDEPENDENCE_32_BIT_ONLY
shaderSignedZeroInfNanPreserveFloat16 = true
shaderSignedZeroInfNanPreserveFloat32 = true
shaderSignedZeroInfNanPreserveFloat64 = true
shaderDenormPreserveFloat16 = true
shaderDenormPreserveFloat32 = true
shaderDenormPreserveFloat64 = true
shaderDenormFlushToZeroFloat16 = true
shaderDenormFlushToZeroFloat32 = true
shaderDenormFlushToZeroFloat64 = true
shaderRoundingModeRTEFloat16 = true
shaderRoundingModeRTEFloat32 = true
shaderRoundingModeRTEFloat64 = true
shaderRoundingModeRTZFloat16 = true
shaderRoundingModeRTZFloat32 = true
shaderRoundingModeRTZFloat64 = true
maxUpdateAfterBindDescriptorsInAllPools = 67108863
shaderUniformBufferArrayNonUniformIndexingNative = false
shaderSampledImageArrayNonUniformIndexingNative = false
shaderStorageBufferArrayNonUniformIndexingNative = false
shaderStorageImageArrayNonUniformIndexingNative = false
shaderInputAttachmentArrayNonUniformIndexingNative = false
robustBufferAccessUpdateAfterBind = true
quadDivergentImplicitLod = false
maxPerStageDescriptorUpdateAfterBindSamplers = 8388606
maxPerStageDescriptorUpdateAfterBindUniformBuffers = 8388606
maxPerStageDescriptorUpdateAfterBindStorageBuffers = 8388606
maxPerStageDescriptorUpdateAfterBindSampledImages = 8388606
maxPerStageDescriptorUpdateAfterBindStorageImages = 8388606
maxPerStageDescriptorUpdateAfterBindInputAttachments = 8388606
maxPerStageUpdateAfterBindResources = 8388606
maxDescriptorSetUpdateAfterBindSamplers = 8388606
maxDescriptorSetUpdateAfterBindUniformBuffers = 8388606
maxDescriptorSetUpdateAfterBindUniformBuffersDynamic = 16
maxDescriptorSetUpdateAfterBindStorageBuffers = 8388606
maxDescriptorSetUpdateAfterBindStorageBuffersDynamic = 8
maxDescriptorSetUpdateAfterBindSampledImages = 8388606
maxDescriptorSetUpdateAfterBindStorageImages = 8388606
maxDescriptorSetUpdateAfterBindInputAttachments = 8388606
supportedDepthResolveModes: count = 4
RESOLVE_MODE_SAMPLE_ZERO_BIT
RESOLVE_MODE_AVERAGE_BIT
RESOLVE_MODE_MIN_BIT
RESOLVE_MODE_MAX_BIT
supportedStencilResolveModes: count = 3
RESOLVE_MODE_SAMPLE_ZERO_BIT
RESOLVE_MODE_MIN_BIT
RESOLVE_MODE_MAX_BIT
independentResolveNone = true
independentResolve = true
filterMinmaxSingleComponentFormats = true
filterMinmaxImageComponentMapping = true
maxTimelineSemaphoreValueDifference = 18446744073709551615
framebufferIntegerColorSampleCounts: count = 1
SAMPLE_COUNT_1_BIT
Device Extensions: count = 112
VK_AMD_buffer_marker : extension revision 1
VK_AMD_device_coherent_memory : extension revision 1
VK_AMD_draw_indirect_count : extension revision 2
VK_AMD_gcn_shader : extension revision 1
VK_AMD_gpu_shader_half_float : extension revision 2
VK_AMD_gpu_shader_int16 : extension revision 2
VK_AMD_memory_overallocation_behavior : extension revision 1
VK_AMD_mixed_attachment_samples : extension revision 1
VK_AMD_shader_ballot : extension revision 1
VK_AMD_shader_core_properties : extension revision 2
VK_AMD_shader_core_properties2 : extension revision 1
VK_AMD_shader_explicit_vertex_parameter : extension revision 1
VK_AMD_shader_fragment_mask : extension revision 1
VK_AMD_shader_image_load_store_lod : extension revision 1
VK_AMD_shader_info : extension revision 1
VK_AMD_shader_trinary_minmax : extension revision 1
VK_AMD_texture_gather_bias_lod : extension revision 1
VK_EXT_4444_formats : extension revision 1
VK_EXT_buffer_device_address : extension revision 2
VK_EXT_calibrated_timestamps : extension revision 1
VK_EXT_conditional_rendering : extension revision 2
VK_EXT_conservative_rasterization : extension revision 1
VK_EXT_custom_border_color : extension revision 12
VK_EXT_depth_clip_enable : extension revision 1
VK_EXT_depth_range_unrestricted : extension revision 1
VK_EXT_descriptor_indexing : extension revision 2
VK_EXT_discard_rectangles : extension revision 1
VK_EXT_display_control : extension revision 1
VK_EXT_extended_dynamic_state : extension revision 1
VK_EXT_external_memory_dma_buf : extension revision 1
VK_EXT_external_memory_host : extension revision 1
VK_EXT_global_priority : extension revision 2
VK_EXT_host_query_reset : extension revision 1
VK_EXT_image_robustness : extension revision 1
VK_EXT_index_type_uint8 : extension revision 1
VK_EXT_inline_uniform_block : extension revision 1
VK_EXT_line_rasterization : extension revision 1
VK_EXT_memory_budget : extension revision 1
VK_EXT_memory_priority : extension revision 1
VK_EXT_pci_bus_info : extension revision 2
VK_EXT_pipeline_creation_cache_control : extension revision 3
VK_EXT_pipeline_creation_feedback : extension revision 1
VK_EXT_post_depth_coverage : extension revision 1
VK_EXT_private_data : extension revision 1
VK_EXT_queue_family_foreign : extension revision 1
VK_EXT_robustness2 : extension revision 1
VK_EXT_sampler_filter_minmax : extension revision 2
VK_EXT_scalar_block_layout : extension revision 1
VK_EXT_shader_atomic_float : extension revision 1
VK_EXT_shader_demote_to_helper_invocation : extension revision 1
VK_EXT_shader_image_atomic_int64 : extension revision 1
VK_EXT_shader_stencil_export : extension revision 1
VK_EXT_shader_subgroup_ballot : extension revision 1
VK_EXT_shader_subgroup_vote : extension revision 1
VK_EXT_shader_viewport_index_layer : extension revision 1
VK_EXT_subgroup_size_control : extension revision 2
VK_EXT_texel_buffer_alignment : extension revision 1
VK_EXT_transform_feedback : extension revision 1
VK_EXT_vertex_attribute_divisor : extension revision 3
VK_EXT_ycbcr_image_arrays : extension revision 1
VK_GOOGLE_decorate_string : extension revision 1
VK_GOOGLE_hlsl_functionality1 : extension revision 1
VK_GOOGLE_user_type : extension revision 1
VK_KHR_16bit_storage : extension revision 1
VK_KHR_8bit_storage : extension revision 1
VK_KHR_bind_memory2 : extension revision 1
VK_KHR_buffer_device_address : extension revision 1
VK_KHR_copy_commands2 : extension revision 1
VK_KHR_create_renderpass2 : extension revision 1
VK_KHR_dedicated_allocation : extension revision 3
VK_KHR_depth_stencil_resolve : extension revision 1
VK_KHR_descriptor_update_template : extension revision 1
VK_KHR_device_group : extension revision 4
VK_KHR_draw_indirect_count : extension revision 1
VK_KHR_driver_properties : extension revision 1
VK_KHR_external_fence : extension revision 1
VK_KHR_external_fence_fd : extension revision 1
VK_KHR_external_memory : extension revision 1
VK_KHR_external_memory_fd : extension revision 1
VK_KHR_external_semaphore : extension revision 1
VK_KHR_external_semaphore_fd : extension revision 1
VK_KHR_get_memory_requirements2 : extension revision 1
VK_KHR_image_format_list : extension revision 1
VK_KHR_imageless_framebuffer : extension revision 1
VK_KHR_incremental_present : extension revision 1
VK_KHR_maintenance1 : extension revision 2
VK_KHR_maintenance2 : extension revision 1
VK_KHR_maintenance3 : extension revision 1
VK_KHR_multiview : extension revision 1
VK_KHR_pipeline_executable_properties : extension revision 1
VK_KHR_push_descriptor : extension revision 2
VK_KHR_relaxed_block_layout : extension revision 1
VK_KHR_sampler_mirror_clamp_to_edge : extension revision 3
VK_KHR_sampler_ycbcr_conversion : extension revision 14
VK_KHR_separate_depth_stencil_layouts : extension revision 1
VK_KHR_shader_atomic_int64 : extension revision 1
VK_KHR_shader_clock : extension revision 1
VK_KHR_shader_draw_parameters : extension revision 1
VK_KHR_shader_float16_int8 : extension revision 1
VK_KHR_shader_float_controls : extension revision 4
VK_KHR_shader_non_semantic_info : extension revision 1
VK_KHR_shader_subgroup_extended_types : extension revision 1
VK_KHR_shader_terminate_invocation : extension revision 1
VK_KHR_spirv_1_4 : extension revision 1
VK_KHR_storage_buffer_storage_class : extension revision 1
VK_KHR_swapchain : extension revision 70
VK_KHR_swapchain_mutable_format : extension revision 1
VK_KHR_timeline_semaphore : extension revision 2
VK_KHR_uniform_buffer_standard_layout : extension revision 1
VK_KHR_variable_pointers : extension revision 1
VK_KHR_vulkan_memory_model : extension revision 3
VK_NV_compute_shader_derivatives : extension revision 1
VkQueueFamilyProperties:
========================
queueProperties[0]:
-------------------
minImageTransferGranularity = (1,1,1)
queueCount = 1
queueFlags = QUEUE_GRAPHICS | QUEUE_COMPUTE | QUEUE_TRANSFER | QUEUE_SPARSE_BINDING
timestampValidBits = 64
present support = true
queueProperties[1]:
-------------------
minImageTransferGranularity = (1,1,1)
queueCount = 4
queueFlags = QUEUE_COMPUTE | QUEUE_TRANSFER | QUEUE_SPARSE_BINDING
timestampValidBits = 64
present support = true
VkPhysicalDeviceMemoryProperties:
=================================
memoryHeaps: count = 3
memoryHeaps[0]:
size = 12616466432 (0x2f0000000) (11.75 GiB)
budget = 11591921664 (0x2b2eeb000) (10.80 GiB)
usage = 0 (0x00000000) (0.00 B)
flags: count = 1
MEMORY_HEAP_DEVICE_LOCAL_BIT
memoryHeaps[1]:
size = 33671931904 (0x7d700e800) (31.36 GiB)
budget = 33592444928 (0x7d2440800) (31.29 GiB)
usage = 0 (0x00000000) (0.00 B)
flags: count = 0
None
memoryHeaps[2]:
size = 268435456 (0x10000000) (256.00 MiB)
budget = 32333824 (0x01ed6000) (30.84 MiB)
usage = 0 (0x00000000) (0.00 B)
flags: count = 1
MEMORY_HEAP_DEVICE_LOCAL_BIT
memoryTypes: count = 8
memoryTypes[0]:
heapIndex = 0
propertyFlags = 0x0001: count = 1
MEMORY_PROPERTY_DEVICE_LOCAL_BIT
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[1]:
heapIndex = 1
propertyFlags = 0x0006: count = 2
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[2]:
heapIndex = 2
propertyFlags = 0x0007: count = 3
MEMORY_PROPERTY_DEVICE_LOCAL_BIT
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[3]:
heapIndex = 1
propertyFlags = 0x000e: count = 3
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
MEMORY_PROPERTY_HOST_CACHED_BIT
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[4]:
heapIndex = 0
propertyFlags = 0x00c1: count = 3
MEMORY_PROPERTY_DEVICE_LOCAL_BIT
MEMORY_PROPERTY_DEVICE_COHERENT_BIT_AMD
MEMORY_PROPERTY_DEVICE_UNCACHED_BIT_AMD
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[5]:
heapIndex = 1
propertyFlags = 0x00c6: count = 4
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
MEMORY_PROPERTY_DEVICE_COHERENT_BIT_AMD
MEMORY_PROPERTY_DEVICE_UNCACHED_BIT_AMD
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[6]:
heapIndex = 2
propertyFlags = 0x00c7: count = 5
MEMORY_PROPERTY_DEVICE_LOCAL_BIT
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
MEMORY_PROPERTY_DEVICE_COHERENT_BIT_AMD
MEMORY_PROPERTY_DEVICE_UNCACHED_BIT_AMD
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
memoryTypes[7]:
heapIndex = 1
propertyFlags = 0x00ce: count = 5
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
MEMORY_PROPERTY_HOST_CACHED_BIT
MEMORY_PROPERTY_DEVICE_COHERENT_BIT_AMD
MEMORY_PROPERTY_DEVICE_UNCACHED_BIT_AMD
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D16_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
VkPhysicalDeviceFeatures:
=========================
robustBufferAccess = true
fullDrawIndexUint32 = true
imageCubeArray = true
independentBlend = true
geometryShader = true
tessellationShader = true
sampleRateShading = true
dualSrcBlend = true
logicOp = true
multiDrawIndirect = true
drawIndirectFirstInstance = true
depthClamp = true
depthBiasClamp = true
fillModeNonSolid = true
depthBounds = true
wideLines = true
largePoints = true
alphaToOne = false
multiViewport = true
samplerAnisotropy = true
textureCompressionETC2 = false
textureCompressionASTC_LDR = false
textureCompressionBC = true
occlusionQueryPrecise = true
pipelineStatisticsQuery = true
vertexPipelineStoresAndAtomics = true
fragmentStoresAndAtomics = true
shaderTessellationAndGeometryPointSize = true
shaderImageGatherExtended = true
shaderStorageImageExtendedFormats = true
shaderStorageImageMultisample = true
shaderStorageImageReadWithoutFormat = true
shaderStorageImageWriteWithoutFormat = true
shaderUniformBufferArrayDynamicIndexing = true
shaderSampledImageArrayDynamicIndexing = true
shaderStorageBufferArrayDynamicIndexing = true
shaderStorageImageArrayDynamicIndexing = true
shaderClipDistance = true
shaderCullDistance = true
shaderFloat64 = true
shaderInt64 = true
shaderInt16 = true
shaderResourceResidency = false
shaderResourceMinLod = true
sparseBinding = true
sparseResidencyBuffer = false
sparseResidencyImage2D = false
sparseResidencyImage3D = false
sparseResidency2Samples = false
sparseResidency4Samples = false
sparseResidency8Samples = false
sparseResidency16Samples = false
sparseResidencyAliased = false
variableMultisampleRate = true
inheritedQueries = true
VkPhysicalDevice16BitStorageFeatures:
-------------------------------------
storageBuffer16BitAccess = true
uniformAndStorageBuffer16BitAccess = true
storagePushConstant16 = true
storageInputOutput16 = true
VkPhysicalDevice4444FormatsFeaturesEXT:
---------------------------------------
formatA4R4G4B4 = true
formatA4B4G4R4 = true
VkPhysicalDevice8BitStorageFeatures:
------------------------------------
storageBuffer8BitAccess = true
uniformAndStorageBuffer8BitAccess = true
storagePushConstant8 = true
VkPhysicalDeviceBufferDeviceAddressFeatures:
--------------------------------------------
bufferDeviceAddress = true
bufferDeviceAddressCaptureReplay = false
bufferDeviceAddressMultiDevice = false
VkPhysicalDeviceBufferDeviceAddressFeaturesEXT:
-----------------------------------------------
bufferDeviceAddress = true
bufferDeviceAddressCaptureReplay = false
bufferDeviceAddressMultiDevice = false
VkPhysicalDeviceConditionalRenderingFeaturesEXT:
------------------------------------------------
conditionalRendering = true
inheritedConditionalRendering = false
VkPhysicalDeviceCustomBorderColorFeaturesEXT:
---------------------------------------------
customBorderColors = true
customBorderColorWithoutFormat = true
VkPhysicalDeviceDepthClipEnableFeaturesEXT:
-------------------------------------------
depthClipEnable = true
VkPhysicalDeviceDescriptorIndexingFeatures:
-------------------------------------------
shaderInputAttachmentArrayDynamicIndexing = true
shaderUniformTexelBufferArrayDynamicIndexing = true
shaderStorageTexelBufferArrayDynamicIndexing = true
shaderUniformBufferArrayNonUniformIndexing = true
shaderSampledImageArrayNonUniformIndexing = true
shaderStorageBufferArrayNonUniformIndexing = true
shaderStorageImageArrayNonUniformIndexing = true
shaderInputAttachmentArrayNonUniformIndexing = true
shaderUniformTexelBufferArrayNonUniformIndexing = true
shaderStorageTexelBufferArrayNonUniformIndexing = true
descriptorBindingUniformBufferUpdateAfterBind = true
descriptorBindingSampledImageUpdateAfterBind = true
descriptorBindingStorageImageUpdateAfterBind = true
descriptorBindingStorageBufferUpdateAfterBind = true
descriptorBindingUniformTexelBufferUpdateAfterBind = true
descriptorBindingStorageTexelBufferUpdateAfterBind = true
descriptorBindingUpdateUnusedWhilePending = true
descriptorBindingPartiallyBound = true
descriptorBindingVariableDescriptorCount = true
runtimeDescriptorArray = true
VkPhysicalDeviceExtendedDynamicStateFeaturesEXT:
------------------------------------------------
extendedDynamicState = true
VkPhysicalDeviceHostQueryResetFeatures:
---------------------------------------
hostQueryReset = true
VkPhysicalDeviceImageRobustnessFeaturesEXT:
-------------------------------------------
robustImageAccess = true
VkPhysicalDeviceImagelessFramebufferFeatures:
---------------------------------------------
imagelessFramebuffer = true
VkPhysicalDeviceIndexTypeUint8FeaturesEXT:
------------------------------------------
indexTypeUint8 = true
VkPhysicalDeviceInlineUniformBlockFeaturesEXT:
----------------------------------------------
inlineUniformBlock = true
descriptorBindingInlineUniformBlockUpdateAfterBind = true
VkPhysicalDeviceLineRasterizationFeaturesEXT:
---------------------------------------------
rectangularLines = false
bresenhamLines = true
smoothLines = false
stippledRectangularLines = false
stippledBresenhamLines = true
stippledSmoothLines = false
VkPhysicalDeviceMemoryPriorityFeaturesEXT:
------------------------------------------
memoryPriority = true
VkPhysicalDeviceMultiviewFeatures:
----------------------------------
multiview = true
multiviewGeometryShader = true
multiviewTessellationShader = true
VkPhysicalDevicePipelineCreationCacheControlFeaturesEXT:
--------------------------------------------------------
pipelineCreationCacheControl = true
VkPhysicalDevicePipelineExecutablePropertiesFeaturesKHR:
--------------------------------------------------------
pipelineExecutableInfo = true
VkPhysicalDevicePrivateDataFeaturesEXT:
---------------------------------------
privateData = true
VkPhysicalDeviceProtectedMemoryFeatures:
----------------------------------------
protectedMemory = false
VkPhysicalDeviceRobustness2FeaturesEXT:
---------------------------------------
robustBufferAccess2 = true
robustImageAccess2 = true
nullDescriptor = true
VkPhysicalDeviceSamplerYcbcrConversionFeatures:
-----------------------------------------------
samplerYcbcrConversion = true
VkPhysicalDeviceScalarBlockLayoutFeatures:
------------------------------------------
scalarBlockLayout = true
VkPhysicalDeviceSeparateDepthStencilLayoutsFeatures:
----------------------------------------------------
separateDepthStencilLayouts = true
VkPhysicalDeviceShaderAtomicFloatFeaturesEXT:
---------------------------------------------
shaderBufferFloat32Atomics = true
shaderBufferFloat32AtomicAdd = false
shaderBufferFloat64Atomics = true
shaderBufferFloat64AtomicAdd = false
shaderSharedFloat32Atomics = true
shaderSharedFloat32AtomicAdd = true
shaderSharedFloat64Atomics = true
shaderSharedFloat64AtomicAdd = false
shaderImageFloat32Atomics = true
shaderImageFloat32AtomicAdd = false
sparseImageFloat32Atomics = false
sparseImageFloat32AtomicAdd = false
VkPhysicalDeviceShaderAtomicInt64Features:
------------------------------------------
shaderBufferInt64Atomics = true
shaderSharedInt64Atomics = true
VkPhysicalDeviceShaderClockFeaturesKHR:
---------------------------------------
shaderSubgroupClock = true
shaderDeviceClock = true
VkPhysicalDeviceShaderDemoteToHelperInvocationFeaturesEXT:
----------------------------------------------------------
shaderDemoteToHelperInvocation = true
VkPhysicalDeviceShaderDrawParametersFeatures:
---------------------------------------------
shaderDrawParameters = true
VkPhysicalDeviceShaderFloat16Int8Features:
------------------------------------------
shaderFloat16 = true
shaderInt8 = true
VkPhysicalDeviceShaderImageAtomicInt64FeaturesEXT:
--------------------------------------------------
shaderImageInt64Atomics = true
sparseImageInt64Atomics = false
VkPhysicalDeviceShaderSubgroupExtendedTypesFeatures:
----------------------------------------------------
shaderSubgroupExtendedTypes = true
VkPhysicalDeviceShaderTerminateInvocationFeaturesKHR:
-----------------------------------------------------
shaderTerminateInvocation = true
VkPhysicalDeviceSubgroupSizeControlFeaturesEXT:
-----------------------------------------------
subgroupSizeControl = true
computeFullSubgroups = true
VkPhysicalDeviceTexelBufferAlignmentFeaturesEXT:
------------------------------------------------
texelBufferAlignment = true
VkPhysicalDeviceTimelineSemaphoreFeatures:
------------------------------------------
timelineSemaphore = true
VkPhysicalDeviceTransformFeedbackFeaturesEXT:
---------------------------------------------
transformFeedback = true
geometryStreams = true
VkPhysicalDeviceUniformBufferStandardLayoutFeatures:
----------------------------------------------------
uniformBufferStandardLayout = true
VkPhysicalDeviceVariablePointersFeatures:
-----------------------------------------
variablePointersStorageBuffer = true
variablePointers = true
VkPhysicalDeviceVertexAttributeDivisorFeaturesEXT:
--------------------------------------------------
vertexAttributeInstanceRateDivisor = true
vertexAttributeInstanceRateZeroDivisor = true
VkPhysicalDeviceVulkan11Features:
---------------------------------
storageBuffer16BitAccess = true
uniformAndStorageBuffer16BitAccess = true
storagePushConstant16 = true
storageInputOutput16 = true
multiview = true
multiviewGeometryShader = true
multiviewTessellationShader = true
variablePointersStorageBuffer = true
variablePointers = true
protectedMemory = false
samplerYcbcrConversion = true
shaderDrawParameters = true
VkPhysicalDeviceVulkan12Features:
---------------------------------
samplerMirrorClampToEdge = true
drawIndirectCount = true
storageBuffer8BitAccess = true
uniformAndStorageBuffer8BitAccess = true
storagePushConstant8 = true
shaderBufferInt64Atomics = true
shaderSharedInt64Atomics = true
shaderFloat16 = true
shaderInt8 = true
descriptorIndexing = true
shaderInputAttachmentArrayDynamicIndexing = true
shaderUniformTexelBufferArrayDynamicIndexing = true
shaderStorageTexelBufferArrayDynamicIndexing = true
shaderUniformBufferArrayNonUniformIndexing = true
shaderSampledImageArrayNonUniformIndexing = true
shaderStorageBufferArrayNonUniformIndexing = true
shaderStorageImageArrayNonUniformIndexing = true
shaderInputAttachmentArrayNonUniformIndexing = true
shaderUniformTexelBufferArrayNonUniformIndexing = true
shaderStorageTexelBufferArrayNonUniformIndexing = true
descriptorBindingUniformBufferUpdateAfterBind = true
descriptorBindingSampledImageUpdateAfterBind = true
descriptorBindingStorageImageUpdateAfterBind = true
descriptorBindingStorageBufferUpdateAfterBind = true
descriptorBindingUniformTexelBufferUpdateAfterBind = true
descriptorBindingStorageTexelBufferUpdateAfterBind = true
descriptorBindingUpdateUnusedWhilePending = true
descriptorBindingPartiallyBound = true
descriptorBindingVariableDescriptorCount = true
runtimeDescriptorArray = true
samplerFilterMinmax = true
scalarBlockLayout = true
imagelessFramebuffer = true
uniformBufferStandardLayout = true
shaderSubgroupExtendedTypes = true
separateDepthStencilLayouts = true
hostQueryReset = true
timelineSemaphore = true
bufferDeviceAddress = true
bufferDeviceAddressCaptureReplay = false
bufferDeviceAddressMultiDevice = false
vulkanMemoryModel = true
vulkanMemoryModelDeviceScope = true
vulkanMemoryModelAvailabilityVisibilityChains = false
shaderOutputViewportIndex = true
shaderOutputLayer = true
subgroupBroadcastDynamicId = true
VkPhysicalDeviceVulkanMemoryModelFeatures:
------------------------------------------
vulkanMemoryModel = true
vulkanMemoryModelDeviceScope = true
vulkanMemoryModelAvailabilityVisibilityChains = false
VkPhysicalDeviceYcbcrImageArraysFeaturesEXT:
--------------------------------------------
ycbcrImageArrays = true
GPU1:
VkPhysicalDeviceProperties:
---------------------------
apiVersion = 4194306 (1.0.2)
driverVersion = 1 (0x0001)
vendorID = 0x10005
deviceID = 0x0000
deviceType = PHYSICAL_DEVICE_TYPE_CPU
deviceName = llvmpipe (LLVM 11.0.1, 256 bits)
VkPhysicalDeviceLimits:
-----------------------
maxImageDimension1D = 16384
maxImageDimension2D = 16384
maxImageDimension3D = 4096
maxImageDimensionCube = 32768
maxImageArrayLayers = 2048
maxTexelBufferElements = 134217728
maxUniformBufferRange = 65536
maxStorageBufferRange = 134217728
maxPushConstantsSize = 128
maxMemoryAllocationCount = 4096
maxSamplerAllocationCount = 32768
bufferImageGranularity = 0x00000040
sparseAddressSpaceSize = 0x00000000
maxBoundDescriptorSets = 8
maxPerStageDescriptorSamplers = 32
maxPerStageDescriptorUniformBuffers = 16
maxPerStageDescriptorStorageBuffers = 16
maxPerStageDescriptorSampledImages = 128
maxPerStageDescriptorStorageImages = 128
maxPerStageDescriptorInputAttachments = 8
maxPerStageResources = 128
maxDescriptorSetSamplers = 32768
maxDescriptorSetUniformBuffers = 256
maxDescriptorSetUniformBuffersDynamic = 256
maxDescriptorSetStorageBuffers = 256
maxDescriptorSetStorageBuffersDynamic = 256
maxDescriptorSetSampledImages = 256
maxDescriptorSetStorageImages = 256
maxDescriptorSetInputAttachments = 256
maxVertexInputAttributes = 32
maxVertexInputBindings = 32
maxVertexInputAttributeOffset = 2047
maxVertexInputBindingStride = 2048
maxVertexOutputComponents = 128
maxTessellationGenerationLevel = 64
maxTessellationPatchSize = 32
maxTessellationControlPerVertexInputComponents = 128
maxTessellationControlPerVertexOutputComponents = 128
maxTessellationControlPerPatchOutputComponents = 128
maxTessellationControlTotalOutputComponents = 4096
maxTessellationEvaluationInputComponents = 128
maxTessellationEvaluationOutputComponents = 128
maxGeometryShaderInvocations = 32
maxGeometryInputComponents = 64
maxGeometryOutputComponents = 128
maxGeometryOutputVertices = 1024
maxGeometryTotalOutputComponents = 1024
maxFragmentInputComponents = 128
maxFragmentOutputAttachments = 8
maxFragmentDualSrcAttachments = 2
maxFragmentCombinedOutputResources = 8
maxComputeSharedMemorySize = 32768
maxComputeWorkGroupCount: count = 3
65535
65535
65535
maxComputeWorkGroupInvocations = 1024
maxComputeWorkGroupSize: count = 3
1024
1024
1024
subPixelPrecisionBits = 8
subTexelPrecisionBits = 8
mipmapPrecisionBits = 8
maxDrawIndexedIndexValue = 4294967295
maxDrawIndirectCount = 4294967295
maxSamplerLodBias = 16
maxSamplerAnisotropy = 16
maxViewports = 16
maxViewportDimensions: count = 2
16384
16384
viewportBoundsRange: count = 2
-32768
32768
viewportSubPixelBits = 0
minMemoryMapAlignment = 4096
minTexelBufferOffsetAlignment = 0x00000010
minUniformBufferOffsetAlignment = 0x00000010
minStorageBufferOffsetAlignment = 0x00000010
minTexelOffset = -32
maxTexelOffset = 31
minTexelGatherOffset = -32
maxTexelGatherOffset = 31
minInterpolationOffset = -2
maxInterpolationOffset = 2
subPixelInterpolationOffsetBits = 8
maxFramebufferWidth = 16384
maxFramebufferHeight = 16384
maxFramebufferLayers = 2048
framebufferColorSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
framebufferDepthSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
framebufferStencilSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
framebufferNoAttachmentsSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
maxColorAttachments = 8
sampledImageColorSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
sampledImageIntegerSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
sampledImageDepthSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
sampledImageStencilSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
storageImageSampleCounts: count = 2
SAMPLE_COUNT_1_BIT
SAMPLE_COUNT_4_BIT
maxSampleMaskWords = 1
timestampComputeAndGraphics = true
timestampPeriod = 1
maxClipDistances = 8
maxCullDistances = 8
maxCombinedClipAndCullDistances = 8
discreteQueuePriorities = 2
pointSizeRange: count = 2
0
255
lineWidthRange: count = 2
1
1
pointSizeGranularity = 0.125
lineWidthGranularity = 0
strictLines = false
standardSampleLocations = true
optimalBufferCopyOffsetAlignment = 0x00000080
optimalBufferCopyRowPitchAlignment = 0x00000080
nonCoherentAtomSize = 0x00000040
VkPhysicalDeviceSparseProperties:
---------------------------------
residencyStandard2DBlockShape = false
residencyStandard2DMultisampleBlockShape = false
residencyStandard3DBlockShape = false
residencyAlignedMipSize = false
residencyNonResidentStrict = false
VkPhysicalDeviceDriverPropertiesKHR:
------------------------------------
driverID = DRIVER_ID_MESA_LLVMPIPE
driverName = llvmpipe
driverInfo = Mesa 20.3.5 (LLVM 11.0.1)
conformanceVersion = 1.0.0.0
VkPhysicalDeviceIDPropertiesKHR:
--------------------------------
deviceUUID = 00000000-0000-0000-0000-000000000000
driverUUID = 00000000-0000-0000-0000-000000000000
deviceNodeMask = 0
deviceLUIDValid = false
Device Extensions: count = 14
-----------------------------
VK_EXT_external_memory_dma_buf : extension revision 1
VK_EXT_private_data : extension revision 1
VK_GOOGLE_decorate_string : extension revision 1
VK_GOOGLE_hlsl_functionality1 : extension revision 1
VK_KHR_bind_memory2 : extension revision 1
VK_KHR_dedicated_allocation : extension revision 1
VK_KHR_driver_properties : extension revision 1
VK_KHR_get_memory_requirements2 : extension revision 1
VK_KHR_incremental_present : extension revision 1
VK_KHR_maintenance1 : extension revision 1
VK_KHR_relaxed_block_layout : extension revision 1
VK_KHR_sampler_mirror_clamp_to_edge : extension revision 1
VK_KHR_storage_buffer_storage_class : extension revision 1
VK_KHR_swapchain : extension revision 68
VkQueueFamilyProperties:
========================
queueProperties[0]:
-------------------
minImageTransferGranularity = (1,1,1)
queueCount = 1
queueFlags = QUEUE_GRAPHICS | QUEUE_COMPUTE | QUEUE_TRANSFER
timestampValidBits = 64
present support = true
VkPhysicalDeviceMemoryProperties:
=================================
memoryHeaps: count = 1
memoryHeaps[0]:
size = 2147483648 (0x80000000) (2.00 GiB)
budget = 0 (0x00000000) (0.00 B)
usage = 0 (0x00000000) (0.00 B)
flags: count = 1
MEMORY_HEAP_DEVICE_LOCAL_BIT
memoryTypes: count = 1
memoryTypes[0]:
heapIndex = 0
propertyFlags = 0x000f: count = 4
MEMORY_PROPERTY_DEVICE_LOCAL_BIT
MEMORY_PROPERTY_HOST_VISIBLE_BIT
MEMORY_PROPERTY_HOST_COHERENT_BIT
MEMORY_PROPERTY_HOST_CACHED_BIT
usable for:
IMAGE_TILING_OPTIMAL:
color images
FORMAT_D16_UNORM
FORMAT_X8_D24_UNORM_PACK32
FORMAT_D32_SFLOAT
FORMAT_S8_UINT
FORMAT_D24_UNORM_S8_UINT
FORMAT_D32_SFLOAT_S8_UINT
(non-sparse)
IMAGE_TILING_LINEAR:
color images
(non-sparse)
VkPhysicalDeviceFeatures:
=========================
robustBufferAccess = true
fullDrawIndexUint32 = true
imageCubeArray = true
independentBlend = true
geometryShader = true
tessellationShader = true
sampleRateShading = true
dualSrcBlend = true
logicOp = true
multiDrawIndirect = true
drawIndirectFirstInstance = true
depthClamp = true
depthBiasClamp = true
fillModeNonSolid = true
depthBounds = false
wideLines = false
largePoints = true
alphaToOne = true
multiViewport = true
samplerAnisotropy = false
textureCompressionETC2 = false
textureCompressionASTC_LDR = false
textureCompressionBC = true
occlusionQueryPrecise = true
pipelineStatisticsQuery = true
vertexPipelineStoresAndAtomics = true
fragmentStoresAndAtomics = true
shaderTessellationAndGeometryPointSize = true
shaderImageGatherExtended = true
shaderStorageImageExtendedFormats = false
shaderStorageImageMultisample = true
shaderStorageImageReadWithoutFormat = false
shaderStorageImageWriteWithoutFormat = true
shaderUniformBufferArrayDynamicIndexing = false
shaderSampledImageArrayDynamicIndexing = false
shaderStorageBufferArrayDynamicIndexing = false
shaderStorageImageArrayDynamicIndexing = false
shaderClipDistance = true
shaderCullDistance = true
shaderFloat64 = true
shaderInt64 = true
shaderInt16 = true
shaderResourceResidency = false
shaderResourceMinLod = false
sparseBinding = false
sparseResidencyBuffer = false
sparseResidencyImage2D = false
sparseResidencyImage3D = false
sparseResidency2Samples = false
sparseResidency4Samples = false
sparseResidency8Samples = false
sparseResidency16Samples = false
sparseResidencyAliased = false
variableMultisampleRate = false
inheritedQueries = false
VkPhysicalDevicePrivateDataFeaturesEXT:
---------------------------------------
privateData = true#674 Hardware & System Configuration » [SOLVED] How is a 6700XT graphics card supposed to perform? » 2022-11-22 18:06:42
- rolfie
- Replies: 6
Just upgraded my Ryzen 9/X570 system from a 5500XT to a 6700XT graphics card, and I must say I am disappointed about the performance. Not speed itself, now I am seeing drawing artifacts.
Basics: Chimaera, Cinnamon desktop, Lightdm, Chimaera backports kernel and latest amd firmware from same backports. inxi -F shows:
Graphics:
Device-1: AMD Navi 22 driver: amdgpu v: kernel
Display: x11 server: X.Org v: 1.20.11 driver: X: loaded: amdgpu
unloaded: fbdev,modesetting,radeon,vesa dri: radeonsi gpu: amdgpu
resolution: 2560x1440~60Hz
API: OpenGL v: 4.6 Mesa 20.3.5 renderer: AMD NAVY_FLOUNDER (DRM 3.48.0
6.0.0-0.deb11.2-amd64 LLVM 11.0.1)
The artifacts are different depending on the application. Firefox and Tor browser seem to work alright, haven't seen any issues. In Evolution I got some square green blocks in the menu and black ones in the footer. In others I see a pattern of square black boxes. Text display in the system protocol viewer partially is getting scrambled mainly when scrolling back up, some coloured artifacts are also present. When I move the mouse out of the window and try to make a screenshot the contents seems to be re-drawn and the problems are gone.
Prepared this thread with the text editor. Square blocks half colored half white overwrite parts of the text in the line that being edited. Again when I call up the screen capture program the artifacts go away. Addtional effects: square blocks appear in the lower part of the window. When I wait some seconds the pattern changes.
In some games I could identify transparent blocks that instead of the window background show the desktop background (proven by moving the window on the screen). Anyhow, I can't show the artifacts by taking a screen capture, as soon as the mouse activates another window the screen seems to be redrawn correctly.
It is hard to re-produce the issues. I could easily create artifacts with the system protocol viewer this morning, now as I try to prepare my screen for taking a picture with my camera, the viewer seems to be working fine.
I have swapped the two display ports on the card, no real difference. A HDMI cable to test a different route reduces the resolution, but same type of issues.
What do I need to conclude from that behaviour? Is that a defective new card? Or a driver issue, i.e. is the HW not fully supported yet? Do I need to go up to Daedalus?
I know my description is vage. I will try to put together something with gimp from my pictures. This will take a while.
rolfie
Edith: picture with artifacts from different sources: 
This picture will be deleted within 31 days from postimg.org
#675 Re: Installation » [SOLVED] linux-image-6.* / Chimaera » 2022-11-22 16:51:25
You will need to enable backports in your sources.list. Then you are able to install the latest kernel from backports on Chimaera. When you are sure its working fine you should consider installing linux-image-amd64 from backports to receive upgrades from there. Side effect: you won't get updates of the 5.10 line of kernels any more.
Board footer
