Posts by Daniell

Daniell · Installation

I have done the same with the other systems and nothing wrong ever happened, I install or uninstall the systems previously copied with Gparted (as backups) only with Devuan there are problems, plus the one in the other post, solution: UNINSTALL IT.

Sorry for your lost time ... mine? didn't it count ...? Thanks.

Daniell · Installation

I'm referring to the installation of

firmware-misc-nonfree

After reading what appears in that information, I do not understand the reason why I have to do something in swap when I have two other systems installed that do not have any problem to boot -- No, I think I could destroy everything, in that case I uninstall Devuan which are already two problems apart from this one here, something is not right with Devuan.

Going back to post#11, command:

sudo dmesg | grep -i "error||warning|fail|segfault|fatal"

.

A firmware is missing but fails to install because that package does not exist:

firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)

I also believe that I am already wasting my time with this system.

Thank you.

Daniell · Other Issues

No, none of these appear in the system.

Daniell · Installation

It is installed but ... nothing changed.

During installation this call my atention:

update-initramfs: Generating /boot/initrd.img-5.10.0-10-amd64
W: initramfs-tools configuration sets RESUME=UUID=774e937d-2d3d-4cae-aa8a-22a95d62048e
W: but no matching swap device is available.

Daniell · Other Issues

Does anyone know if there is any other application in Devuan that I can install similar to 'ayatana-indicator-sound'?-- although it seems to me that there is a bug with the volume control either pulseaudio or pavucontrol.
Anyway, if there is another alternative, then I could check where is the problem ... so I think ... I'm not an expert.

Thanks.

Daniell · Installation

When I turn on the PC a list of installed systems appears (the grub is in MXLinux).

Then, I click on Devuan ... then the delay for the login page to appear is about 38 seconds.

This does not occur in any of the other installed systems.

Thanks

Daniell · Installation

I have MXLinux and Sparky installed, there is no problem with these system to boot.

$ sudo dmesg | grep -i "error\|warning\|fail\|segfault\|fatal"
[sudo] password for keos: 
[    0.231646] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.239817] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.241192] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.242026] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.242801] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.243513] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.244506] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.245295] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.246480] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    0.247289] ACPI Error: No pointer back to namespace node in package 00000000fe75de7d (20200925/dsargs-301)
[    1.152939] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    1.153322] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    1.160119] i8042: Warning: Keylock active
[    1.871325] psmouse serio1: elantech: elantech_send_cmd query 0x02 failed.
[    1.871337] psmouse serio1: elantech: failed to query capabilities.
[    3.400264] psmouse serio1: Failed to enable mouse on isa0060/serio1
[    5.568940] platform regulatory.0: firmware: failed to load regulatory.db (-2)
[    5.568950] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.568953] cfg80211: failed to load regulatory.db
[    5.889717] wl: module verification failed: signature and/or required key missing - tainting kernel
[    5.991526] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[    5.991559] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
keos@kaos:~
$

$  inxi -Fxxxrza
System:    Host: kaos Kernel: 5.10.0-10-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-10-amd64 
           root=UUID=41b80119-0195-4d8b-94fd-86ff37006b7b ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 
           dm: LightDM 1.26.0 Distro: MX-21_x64 Wildflower October 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: Dell product: Inspiron 3583 v: N/A serial: <filter> Chassis: 
           type: 10 serial: <filter> 
           Mobo: Dell model: 0WHCP7 v: A00 serial: <filter> UEFI: Dell v: 1.5.1 
           date: 05/30/2019 
Battery:   ID-1: BAT0 charge: 39.9 Wh condition: 39.9/42.0 Wh (95%) volts: 12.7/11.4 
           model: SMP DELL VM73283 type: Li-poly serial: <filter> status: Full 
CPU:       Topology: Quad Core model: Intel Core i5-8265U bits: 64 type: MT MCP 
           arch: Kaby Lake family: 6 model-id: 8E (142) stepping: C (12) microcode: EA 
           L2 cache: 6144 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800 
           Speed: 500 MHz min/max: 400/3900 MHz Core speeds (MHz): 1: 500 2: 500 3: 500 
           4: 500 5: 500 6: 500 7: 500 8: 500 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 
           mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling 
           Type: srbds mitigation: TSX disabled 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Dell driver: i915 
           v: kernel bus ID: 00:02.0 chip ID: 8086:3ea0 
           Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa Intel UHD Graphics 620 (WHL GT2) v: 4.6 Mesa 20.3.5 
           direct render: Yes 
Audio:     Device-1: Intel Cannon Point-LP High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9dc8 
           Sound Server: ALSA v: k5.10.0-10-amd64 
Network:   Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 
           v: kernel port: 3000 bus ID: 01:00.0 chip ID: 10ec:8136 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
           Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Dell 
           driver: ath10k_pci v: kernel port: 3000 bus ID: 02:00.0 chip ID: 168c:0042 
           IF: wlan0 state: down mac: <filter> 
           Device-3: Qualcomm Atheros type: USB driver: btusb bus ID: 1-10:5 
           chip ID: 0cf3:e009 
Drives:    Local Storage: total: 238.47 GiB used: 9.67 GiB (4.1%) 
           ID-1: /dev/nvme0n1 model: PC SN520 NVMe WDC 256GB size: 238.47 GiB block size: 
           physical: 512 B logical: 512 B speed: 15.8 Gb/s lanes: 2 serial: <filter> 
           rev: 20200012 scheme: GPT 
Partition: ID-1: / raw size: 17.70 GiB size: 17.17 GiB (97.01%) used: 9.65 GiB (56.2%) 
           fs: ext4 dev: /dev/nvme0n1p3 
Sensors:   System Temperatures: cpu: 38.0 C mobo: N/A 
           Fan Speeds (RPM): cpu: 0 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://www.gtlib.gatech.edu/pub/MX-Linux/workspace/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 
           1: deb [arch=amd64] http://repo.vivaldi.com/stable/deb/ stable main
Info:      Processes: 229 Uptime: 6m Memory: 7.65 GiB used: 747.7 MiB (9.6%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: bash 
           v: 5.1.4 running in: xfce4-terminal inxi: 3.0.36 
keos@kaos:~
$

Daniell · Installation

keos@kaos:~$ sudo dmesg | grep -i "error\|warning\|fail\|segfault\|fatal"
[sudo] password for keos: 
[    0.068975] unchecked MSR access error: RDMSR from 0x123 at rIP: 0xffffffff8aa6b314 (native_read_msr+0x4/0x30)
[    0.068992] unchecked MSR access error: WRMSR to 0x123 (tried to write 0x0000000000000001) at rIP: 0xffffffff8aa6b3e4 (native_write_msr+0x4/0x20)
[    0.225962] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.234415] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.235788] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.236624] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.237400] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.238111] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.239101] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.239890] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.241080] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.241886] ACPI Error: No pointer back to namespace node in package 000000007bc4ef27 (20200925/dsargs-301)
[    0.659067] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.659441] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.664477] i8042: Warning: Keylock active
[    1.281809] psmouse serio1: elantech: elantech_send_cmd query 0x02 failed.
[    1.281871] psmouse serio1: elantech: failed to query capabilities.
[    2.821907] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   32.946216] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2)
[   32.946229] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
[   32.946233] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[   33.338777] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[   33.338794] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[   35.350810] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro
keos@kaos:~$

This is the information that leaves the result of that command but I don't understand it, no idea what it all means or what to do, thanks for any suggestions.

Daniell · Other Issues

youtube-dl has been having a lot of update problems lately which has forced me to switch to yt-dlp which in my personal experience so far has been much better.

Regards

Daniell · Installation

It's fine, it runs perfectly in everything else, very fast -- I have a feeling, I'm just a beginner, that it must be something to do with the Grub.

EDIT: there is another problem too, maybe not related with this one here https://dev1galaxy.org/viewtopic.php?id=4766 but i dont know, maybe it somethig with the stability of the system, just to let you know, thanks.

Daniell · Installation

Thank you for your response on this matter. Anyway, now what is pressing is to see what I can do to solve this delay.

Daniell · Installation

Hello,

Devuan takes a long time to boot, I can't find a command for a 'no systemd' that allows me to show here the system boot time but it takes about 33 seconds...

I have two other systems,

root@kaos:~# fdisk -l
Disk /dev/nvme0n1: 238.47 GiB, 256060514304 bytes, 500118192 sectors
Disk model: PC SN520 NVMe WDC 256GB                 
Units: 1 * 512 sectors = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
Disk identifier: D3C3AE91-35A3-4FC3-8778-09C16F235FCF

Disposit.      Start End Sectors Size Type
/dev/nvme0n1p1 2048 3002367 3000320 1.4G System EFI
/dev/nvme0n1p2 3002368 5984255 2981888 1.4G Linux swap
/dev/nvme0n1p3 5984256 43108351 37124096 17.7G Linux Root (x86)
/dev/nvme0n1p4 43108352 63014911 19906560 9.5G Linux file system
/dev/nvme0n1p5 63014912 85743615 22728704 10.8G Linux filesystem
/dev/nvme0n1p6 85743616 500117503 414373888 197.6G Linux file system
root@kaos:~#

root@kaos:~# cat /etc/*release
PRETTY_NAME="Devuan GNU/Linux 4 (chimaera)"
NAME="Devuan GNU/Linux"
VERSION_ID="4"
VERSION="4 (chimaera)"
VERSION_CODENAME="chimaera"
ID=devuan
ID_LIKE=debian
HOME_URL="https://www.devuan.org/"
SUPPORT_URL="https://devuan.org/os/community"
BUG_REPORT_URL="https://bugs.devuan.org/"
root@kaos:~#

Thanks for any advice,

Regards.

Daniell · Other Issues

Since I'm not familiar with the distro I thought that because of systemd Devuan didn't have [ERROR} -- I just replaced it.

EDIT: My mistake, the name of the application seems to be ayatana-indicator-sound.

EDIT:

No, after a prolonged shutdown the problem persists in the same way as with the previous app, it must be something else, no idea ...

root@kaos:~# cat /etc/*release
PRETTY_NAME="Devuan GNU/Linux 4 (chimaera)"
NAME="Devuan GNU/Linux"
VERSION_ID="4"
VERSION="4 (chimaera)"
VERSION_CODENAME="chimaera"
ID=devuan
ID_LIKE=debian
HOME_URL="https://www.devuan.org/"
SUPPORT_URL="https://devuan.org/os/community"
BUG_REPORT_URL="https://bugs.devuan.org/"
root@kaos:~#

Daniell · Other Issues

Hello,

The configuration in xfce4-pulseaudio-plugin is not kept after shutdown/startup -- only on reboot this one lasts.

{It switches back to speakers if I put it on headphones or the volume decreases even if I turn it up, etc}.

I've tried several times with 'logout' to see if it resolves the issue, nothing.

And no, I haven't found anything on Google about this problem.

Am I missing something to install...?

Thanks for any comments.

Daniell · Other Issues

For me, the solution was to uncheck the setting Automatically expand columns as needed in Thunar's menu View" > Configure Columns...

And for me too ... https://askubuntu.com/questions/405369/ … gs-on-exit

Thanks!

Daniell · Other Issues

Hello.

I can't configure in #thunar, when closing/opening the settings go away.
Just in case, I changed too the 'thems' to another style ...
This problem do not exist as a user.

keos@kaos:~$ cat /etc/*release
PRETTY_NAME="Devuan GNU/Linux 4 (chimaera)"
NAME="Devuan GNU/Linux"
VERSION_ID="4"
VERSION="4 (chimaera)"
VERSION_CODENAME="chimaera"
ID=devuan
ID_LIKE=debian
HOME_URL="https://www.devuan.org/"
SUPPORT_URL="https://devuan.org/os/community"
BUG_REPORT_URL="https://bugs.devuan.org/"
keos@kaos:~$

This is the configuration i want to have,

Thanks for any advice

The officially official Devuan Forum!

#1 Re: Installation » Devuan takes a long time to start up » 2022-01-09 15:54:11

#2 Re: Installation » Devuan takes a long time to start up » 2022-01-09 14:42:28

#3 Re: Other Issues » Problems with configuration, xfce4-pulseaudio-plugin » 2022-01-09 13:40:59

#4 Re: Installation » Devuan takes a long time to start up » 2022-01-09 13:19:34

#5 Re: Other Issues » Problems with configuration, xfce4-pulseaudio-plugin » 2022-01-09 09:22:25

#6 Re: Installation » Devuan takes a long time to start up » 2022-01-09 09:02:41

#7 Re: Installation » Devuan takes a long time to start up » 2022-01-09 00:43:07

#8 Re: Installation » Devuan takes a long time to start up » 2022-01-09 00:16:18

#9 Re: Other Issues » [SOLVED] youtube-dl upgrade problem » 2022-01-08 09:41:28

#10 Re: Installation » Devuan takes a long time to start up » 2022-01-08 00:53:18

#11 Re: Installation » Devuan takes a long time to start up » 2022-01-07 23:21:13

#12 Installation » Devuan takes a long time to start up » 2022-01-07 19:20:26

#13 Re: Other Issues » Problems with configuration, xfce4-pulseaudio-plugin » 2022-01-07 19:00:35

#14 Other Issues » Problems with configuration, xfce4-pulseaudio-plugin » 2022-01-03 11:12:13

#15 Re: Other Issues » [Solved] Problem setting up #Thunar, xfce4 » 2022-01-03 09:45:58

#16 Other Issues » [Solved] Problem setting up #Thunar, xfce4 » 2022-01-01 17:55:48

Board footer