Download | Devuan.org | Git | Bugs | Packages

The officially official Devuan Forum!

You are not logged in.

Pages: 1

#1 Re: Installation » [SOLVED] Devuan XFCE autologin » 2021-01-14 14:41:53

zerrax
ralph.ronnquist wrote:

Btw, are you sure you are using lightdm and not slim which is the default in Devuan ?

If the latter, you'll rather need to edit /etc/slim.conf to have default_user and auto_login set up.

Thank you for your response, the above solved the problem, and autologin works now!
I didn't know that Devuan used slim instead of lightdm :-)

#2 Re: Installation » [SOLVED] Devuan XFCE autologin » 2021-01-13 14:14:45

zerrax
ralph.ronnquist wrote:

Perhaps it should say [SeatDefaults] rather than [Seat:*] ?

Tried it, but no still I get the "red" loggon screen of Devuan XFCE.....

#3 Installation » [SOLVED] Devuan XFCE autologin » 2021-01-12 12:17:12

zerrax
Replies: 5

Hi,

I am trying to get auto login to work in Devuan Buster with XFCE
I tried a lot of solutions on the internet without success...

username: john

My current /etc/lightdm/lightdm.conf looks like this:

[Seat:*]

autologin-user=john
autologin-user-timeout=0

and I did this:

groupadd -r autologin
gpasswd -a john autologin

still no success, can anybody help me?

#4 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 19:30:23

zerrax
larsH wrote:

Hi

What does "aplay -l" say ???  And as well "cat /proc/asound/cards" ?? For me it looks like, enabled or not, that linux sees your intel device.

Have you tried with pulseaudio enabled (see devuan release notes for howto enable it).

Have a nice day

You were right, Linux did see my Intel HD soundcard, I checked and it was not disabled in bios (as I tought I did in the first place ;-)
it started to work when I installed via "apper" additional alsa  compoments like alsa mixer....
it doesn't show up in sound manager icon, but when I move the intel sound card to the top, (in the multimedia - sound - "advanced" menu) it works! no need for using an inferior USB sound dongle anymore.

Advise to make Devuan better for mainstream (newbie) users:
I think it would help a lot of new Devuan users as the soundcard works "out of the box" and not like this that you have install additional (standard?) packages and configure difficult things to get a soundcard working that is detected by Linux in the firstplace....
But Rome wasn't build in one day :-) I'm very happy, this post can be closed

#5 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 11:42:17

zerrax

I go it "working" by re-installing pulseaudio, but the sound quality is very disappointing.....
almost not usable for normal use...

thank you everybody for the tips, I'm going to look for a better UAC2 compatible DAC and use that as soundcard....

#6 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 10:28:17

zerrax

Card: USB PnP Sound Device                                                                                                                      F1:  Help               │
│ Chip: USB Mixer                                                                                                                                 F2:  System information │
│ View: F3:[Playback] F4: Capture  F5: All                                                                                                        F6:  Select sound card  │
│ Item: PCM [dB gain: -12.06, -12.06]                                                                                                             Esc: Exit               │
│                                                                                                                                                                         │
│                                                                                                                                                                         │
│                                                                                                                                                                         │
│                                                                                                                                                                         │
│                                                                                                                                                                         │
│                                                                                                                                                                         │
│                                                                                                                                                                         │
│                                                                         ┌──┐                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │  │                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         │▒▒│                                                                                            │
│                                                                         ├──┤               ┌──┐                                                                         │
│                                                                         │OO│               │OO│                                                                         │
│                                                                         └──┘               └──┘                                                                         │
│                                                                        44<>44                                                                                           │
│                                                                 <       PCM        >Auto Gain Control

#7 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 10:26:17

zerrax

Hi Lars, thank you for you tips, I tried Alsa Mixer in termina, and selected first the USB Sound Adapter, and then increased the volume, but still no sound
and within Devuan: Multimedia - Audio Volume - Configure the Audio Volume - Devices - "Outputs: No Output Devices Available"

┌───── Sound Card ──────┐                                                                        │
│                                                                        │-  (default)           │                                                                        │
│                                                                        │0  HDA Intel HDMI      │                                                                        │
│                                                                        │1  USB PnP Sound Device│                                                                        │
│                                                                        │   enter device name...│                                                                        │
│                                                                        └───────────────────────┘

#8 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 10:00:46

zerrax

When I type:

lspci |grep "Audio"

I get:

root@devuan:/home/user# lspci |grep "Audio"
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
root@devuan:/home/user#

(note: I have disabled onboard audio in bios, because I want only the USB Audio Device to work)

#9 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 09:08:46

zerrax
root@devuan:/home/user# dmesg
[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2+deb10u1 (2020-06-07)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=3d1fe700-9bfb-4f92-9b3f-2f050a6d76d4 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d1ebffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d1ec0000-0x00000000d1ec6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d1ec7000-0x00000000d22f5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d22f6000-0x00000000d270afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d270b000-0x00000000d7ee4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7ee5000-0x00000000d7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d875efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d875f000-0x00000000d87fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fadfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d8fae000-0x00000000d8ffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000db836fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db837000-0x00000000dbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. OptiPlex 3020/0VHWTR, BIOS A02 01/07/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3392.441 MHz processor
[    0.001509] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001510] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001516] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.001518] MTRR default type: uncachable
[    0.001519] MTRR fixed ranges enabled:
[    0.001520]   00000-9FFFF write-back
[    0.001520]   A0000-BFFFF uncachable
[    0.001521]   C0000-D3FFF write-protect
[    0.001521]   D4000-E7FFF uncachable
[    0.001522]   E8000-FFFFF write-protect
[    0.001522] MTRR variable ranges enabled:
[    0.001523]   0 base 0000000000 mask 7E00000000 write-back
[    0.001524]   1 base 0200000000 mask 7FE0000000 write-back
[    0.001524]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.001525]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.001525]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.001526]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.001526]   6 disabled
[    0.001526]   7 disabled
[    0.001527]   8 disabled
[    0.001527]   9 disabled
[    0.002128] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002233] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.002236] last_pfn = 0xdb837 max_arch_pfn = 0x400000000
[    0.008062] found SMP MP-table at [mem 0x000fd900-0x000fd90f]
[    0.013343] Using GB pages for direct mapping
[    0.013345] BRK [0x27601000, 0x27601fff] PGTABLE
[    0.013346] BRK [0x27602000, 0x27602fff] PGTABLE
[    0.013346] BRK [0x27603000, 0x27603fff] PGTABLE
[    0.013360] BRK [0x27604000, 0x27604fff] PGTABLE
[    0.013361] BRK [0x27605000, 0x27605fff] PGTABLE
[    0.013505] BRK [0x27606000, 0x27606fff] PGTABLE
[    0.013539] BRK [0x27607000, 0x27607fff] PGTABLE
[    0.013579] BRK [0x27608000, 0x27608fff] PGTABLE
[    0.013630] BRK [0x27609000, 0x27609fff] PGTABLE
[    0.013676] BRK [0x2760a000, 0x2760afff] PGTABLE
[    0.013718] BRK [0x2760b000, 0x2760bfff] PGTABLE
[    0.013766] BRK [0x2760c000, 0x2760cfff] PGTABLE
[    0.013811] RAMDISK: [mem 0x34755000-0x363a1fff]
[    0.013817] ACPI: Early table checksum verification disabled
[    0.015539] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL  )
[    0.015542] ACPI: XSDT 0x00000000D8FEE088 00008C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.015545] ACPI: FACP 0x00000000D8FFA470 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.015549] ACPI: DSDT 0x00000000D8FEE1A0 00C2CA (v02 DELL   CBX3     00000014 INTL 20091112)
[    0.015551] ACPI: FACS 0x00000000DA7FE080 000040
[    0.015552] ACPI: APIC 0x00000000D8FFA580 000072 (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.015554] ACPI: FPDT 0x00000000D8FFA5F8 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.015555] ACPI: SLIC 0x00000000D8FFA640 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.015557] ACPI: LPIT 0x00000000D8FFA7B8 00005C (v01 DELL   CBX3     00000000 AMI. 00000005)
[    0.015559] ACPI: SSDT 0x00000000D8FFA818 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.015560] ACPI: SSDT 0x00000000D8FFAD58 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.015562] ACPI: SSDT 0x00000000D8FFB830 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20120711)
[    0.015564] ACPI: HPET 0x00000000D8FFB9F8 000038 (v01 DELL   CBX3     01072009 AMI. 00000005)
[    0.015566] ACPI: SSDT 0x00000000D8FFBA30 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.015567] ACPI: MCFG 0x00000000D8FFBDA0 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.015569] ACPI: SSDT 0x00000000D8FFBDE0 0034E1 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.015571] ACPI: MSDM 0x00000000D8FFF2C8 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.015576] ACPI: Local APIC address 0xfee00000
[    0.015636] No NUMA configuration found
[    0.015636] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.015639] NODE_DATA(0) allocated [mem 0x21fdf9000-0x21fdfdfff]
[    0.015657] Zone ranges:
[    0.015657]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015658]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015659]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.015659]   Device   empty
[    0.015660] Movable zone start for each node
[    0.015660] Early memory node ranges
[    0.015661]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.015661]   node   0: [mem 0x0000000000100000-0x00000000d1ebffff]
[    0.015662]   node   0: [mem 0x00000000d1ec7000-0x00000000d22f5fff]
[    0.015662]   node   0: [mem 0x00000000d270b000-0x00000000d7ee4fff]
[    0.015662]   node   0: [mem 0x00000000d8000000-0x00000000d875efff]
[    0.015663]   node   0: [mem 0x00000000d8800000-0x00000000d8fadfff]
[    0.015663]   node   0: [mem 0x00000000d9000000-0x00000000da71bfff]
[    0.015664]   node   0: [mem 0x00000000da800000-0x00000000db836fff]
[    0.015664]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.015889] Zeroed struct page in unavailable ranges: 20795 pages
[    0.015890] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.015891] On node 0 totalpages: 2076357
[    0.015892]   DMA zone: 64 pages used for memmap
[    0.015892]   DMA zone: 21 pages reserved
[    0.015893]   DMA zone: 3996 pages, LIFO batch:0
[    0.015957]   DMA32 zone: 13957 pages used for memmap
[    0.015957]   DMA32 zone: 893225 pages, LIFO batch:63
[    0.030426]   Normal zone: 18424 pages used for memmap
[    0.030427]   Normal zone: 1179136 pages, LIFO batch:63
[    0.048523] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff]
[    0.048587] ACPI: PM-Timer IO Port: 0x1808
[    0.048588] ACPI: Local APIC address 0xfee00000
[    0.048593] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.048602] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.048603] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.048604] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.048605] ACPI: IRQ0 used by override.
[    0.048606] ACPI: IRQ9 used by override.
[    0.048607] Using ACPI (MADT) for SMP configuration information
[    0.048608] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.048612] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.048627] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.048628] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.048629] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.048629] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.048629] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.048631] PM: Registered nosave memory: [mem 0xd1ec0000-0xd1ec6fff]
[    0.048632] PM: Registered nosave memory: [mem 0xd22f6000-0xd270afff]
[    0.048632] PM: Registered nosave memory: [mem 0xd7ee5000-0xd7ffffff]
[    0.048633] PM: Registered nosave memory: [mem 0xd875f000-0xd87fffff]
[    0.048634] PM: Registered nosave memory: [mem 0xd8fae000-0xd8ffffff]
[    0.048635] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
[    0.048636] PM: Registered nosave memory: [mem 0xdb837000-0xdbffffff]
[    0.048637] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.048637] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.048638] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.048638] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.048638] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.048639] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.048639] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.048639] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.048640] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.048640] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.048640] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.048641] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.048641] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.048641] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.048643] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.048643] Booting paravirtualized kernel on bare hardware
[    0.048645] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.117767] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[    0.117773] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.117940] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
[    0.117945] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
[    0.117946] pcpu-alloc: [0] 0 1 2 3 
[    0.117962] Built 1 zonelists, mobility grouping on.  Total pages: 2043891
[    0.117963] Policy zone: Normal
[    0.117964] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=UUID=3d1fe700-9bfb-4f92-9b3f-2f050a6d76d4 ro quiet
[    0.121382] Calgary: detecting Calgary via BIOS EBDA area
[    0.121383] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.140024] Memory: 8053828K/8305428K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1588K init, 2276K bss, 251600K reserved, 0K cma-reserved)
[    0.140087] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.140092] Kernel/User page tables isolation: enabled
[    0.140119] ftrace: allocating 31883 entries in 125 pages
[    0.149214] rcu: Hierarchical RCU implementation.
[    0.149215] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.149216] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.151304] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.151491] spurious 8259A interrupt: IRQ7.
[    0.153178] Console: colour VGA+ 80x25
[    0.153183] console [tty0] enabled
[    0.153194] ACPI: Core revision 20180810
[    0.153335] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.153343] hpet clockevent registered
[    0.153347] APIC: Switch to symmetric I/O mode setup
[    0.153684] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.173346] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e66a44ee8, max_idle_ns: 440795328438 ns
[    0.173355] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.88 BogoMIPS (lpj=13569764)
[    0.173357] pid_max: default: 32768 minimum: 301
[    0.173376] Security Framework initialized
[    0.173376] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.173389] AppArmor: AppArmor initialized
[    0.174349] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.174841] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.174865] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.174883] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.175033] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.175033] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.175045] CPU0: Thermal monitoring enabled (TM1)
[    0.175052] process: using mwait in idle threads
[    0.175054] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.175055] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.175056] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.175056] Spectre V2 : Mitigation: Full generic retpoline
[    0.175057] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.175057] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.175062] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.175062] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.175063] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.175080] SRBDS: Vulnerable: No microcode
[    0.175080] MDS: Mitigation: Clear CPU buffers
[    0.175217] Freeing SMP alternatives memory: 24K
[    0.176616] TSC deadline timer enabled
[    0.176619] smpboot: CPU0: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.176679] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.176714] ... version:                3
[    0.176714] ... bit width:              48
[    0.176714] ... generic registers:      4
[    0.176715] ... value mask:             0000ffffffffffff
[    0.176715] ... max period:             00007fffffffffff
[    0.176715] ... fixed-purpose events:   3
[    0.176716] ... event mask:             000000070000000f
[    0.176742] rcu: Hierarchical SRCU implementation.
[    0.177011] random: crng done (trusting CPU's manufacturer)
[    0.177217] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.177249] smp: Bringing up secondary CPUs ...
[    0.177295] x86: Booting SMP configuration:
[    0.177295] .... node  #0, CPUs:      #1 #2
[    0.177347] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.177347]  #3
[    0.177347] smp: Brought up 1 node, 4 CPUs
[    0.177347] smpboot: Max logical packages: 1
[    0.177347] smpboot: Total of 4 processors activated (27139.52 BogoMIPS)
[    0.177545] devtmpfs: initialized
[    0.177545] x86/mm: Memory block size: 128MB
[    0.177858] PM: Registering ACPI NVS region [mem 0xd1ec0000-0xd1ec6fff] (28672 bytes)
[    0.177858] PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
[    0.177858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.177858] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.177858] pinctrl core: initialized pinctrl subsystem
[    0.177858] NET: Registered protocol family 16
[    0.177858] audit: initializing netlink subsys (disabled)
[    0.177858] audit: type=2000 audit(1593589430.024:1): state=initialized audit_enabled=0 res=1
[    0.177858] cpuidle: using governor ladder
[    0.177858] cpuidle: using governor menu
[    0.177858] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.177858] ACPI: bus type PCI registered
[    0.177858] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.177858] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.177858] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.177858] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.177858] PCI: Using configuration type 1 for base access
[    0.177858] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.177858] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.177858] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.177858] ACPI: Added _OSI(Module Device)
[    0.177858] ACPI: Added _OSI(Processor Device)
[    0.177858] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177858] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177858] ACPI: Added _OSI(Linux-Dell-Video)
[    0.177858] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.185559] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.186647] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.187168] ACPI: Dynamic OEM Table Load:
[    0.187172] ACPI: SSDT 0xFFFF96F3D61B5800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.187442] ACPI: Dynamic OEM Table Load:
[    0.187445] ACPI: SSDT 0xFFFF96F3D60E9800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.187730] ACPI: Dynamic OEM Table Load:
[    0.187732] ACPI: SSDT 0xFFFF96F3D614CC00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.188309] ACPI: Interpreter enabled
[    0.188331] ACPI: (supports S0 S3 S4 S5)
[    0.188331] ACPI: Using IOAPIC for interrupt routing
[    0.188349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.188508] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.194860] ACPI: Power Resource [FN00] (off)
[    0.194905] ACPI: Power Resource [FN01] (off)
[    0.194946] ACPI: Power Resource [FN02] (off)
[    0.194986] ACPI: Power Resource [FN03] (off)
[    0.195027] ACPI: Power Resource [FN04] (off)
[    0.195486] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.195489] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.197628] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.197629] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.197888] PCI host bridge to bus 0000:00
[    0.197890] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.197890] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.197891] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.197892] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.197892] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.197893] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.197894] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.197894] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.197895] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.197896] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.197901] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.197963] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000
[    0.197970] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.197974] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.197977] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.198030] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.198037] pci 0000:00:03.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.198108] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.198126] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.198174] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.198223] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.198240] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a00f 64bit]
[    0.198292] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.198347] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.198364] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
[    0.198433] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.198484] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.198546] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.198626] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.198686] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.198764] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.198783] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
[    0.198853] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.198906] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.199040] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.199053] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.199059] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.199064] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.199070] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.199076] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.199082] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
[    0.199110] pci 0000:00:1f.2: PME# supported from D3hot
[    0.199154] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.199168] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
[    0.199184] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.199278] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.199336] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.199363] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.199389] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[    0.199405] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.199495] pci 0000:02:00.0: supports D1 D2
[    0.199496] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.199596] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.199599] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.199601] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.199606] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.200083] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.200114] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.200143] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.200172] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.200200] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.200229] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.200257] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.200286] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.200535] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.200535] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.200535] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.200535] vgaarb: loaded
[    0.200535] pps_core: LinuxPPS API ver. 1 registered
[    0.200535] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.200535] PTP clock support registered
[    0.200535] EDAC MC: Ver: 3.0.0
[    0.200535] PCI: Using ACPI for IRQ routing
[    0.201869] PCI: pci_cache_line_size set to 64 bytes
[    0.201899] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.201900] e820: reserve RAM buffer [mem 0xd1ec0000-0xd3ffffff]
[    0.201901] e820: reserve RAM buffer [mem 0xd22f6000-0xd3ffffff]
[    0.201901] e820: reserve RAM buffer [mem 0xd7ee5000-0xd7ffffff]
[    0.201902] e820: reserve RAM buffer [mem 0xd875f000-0xdbffffff]
[    0.201902] e820: reserve RAM buffer [mem 0xd8fae000-0xdbffffff]
[    0.201903] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
[    0.201904] e820: reserve RAM buffer [mem 0xdb837000-0xdbffffff]
[    0.201904] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.201966] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.201966] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.203725] clocksource: Switched to clocksource tsc-early
[    0.206350] VFS: Disk quotas dquot_6.6.0
[    0.206350] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.206350] AppArmor: AppArmor Filesystem Enabled
[    0.206350] pnp: PnP ACPI init
[    0.206350] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.206350] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.206350] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.206350] system 00:01: [io  0xffff] has been reserved
[    0.206350] system 00:01: [io  0xffff] has been reserved
[    0.206350] system 00:01: [io  0xffff] has been reserved
[    0.206350] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.206350] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.206350] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.206350] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.206350] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.206350] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.206350] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206350] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.206350] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.206350] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.206350] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.206350] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206350] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.206350] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206350] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.206350] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.206350] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.206350] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.206350] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.206350] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.206350] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.206350] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.206350] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.206350] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.206350] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.206350] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.206350] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206350] pnp: PnP ACPI: found 7 devices
[    0.214186] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.214197] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.214198] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.214199] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.214210] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.214214] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.214215] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.214217] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.214219] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.214222] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.214225] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.214230] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.214232] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.214236] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.214238] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.214243] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.214244] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.214244] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.214245] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.214246] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.214246] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.214247] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[    0.214248] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[    0.214248] pci_bus 0000:00: resource 12 [mem 0xdf200000-0xfeafffff window]
[    0.214249] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.214250] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.214250] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.214251] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.214252] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.214252] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.214317] NET: Registered protocol family 2
[    0.214411] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.214430] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.214502] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.214603] TCP: Hash tables configured (established 65536 bind 65536)
[    0.214621] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.214638] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.214674] NET: Registered protocol family 1
[    0.214677] NET: Registered protocol family 44
[    0.214683] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.241414] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c1 took 23490 usecs
[    0.261410] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c1 took 19518 usecs
[    0.261422] PCI: CLS 64 bytes, default 64
[    0.261448] Unpacking initramfs...
[    0.552327] Freeing initrd memory: 28980K
[    0.552378] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.552379] software IO TLB: mapped [mem 0xd3ee5000-0xd7ee5000] (64MB)
[    0.552842] Initialise system trusted keyrings
[    0.552849] Key type blacklist registered
[    0.552887] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.553645] zbud: loaded
[    0.664448] Key type asymmetric registered
[    0.664450] Asymmetric key parser 'x509' registered
[    0.664456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.664475] io scheduler noop registered
[    0.664476] io scheduler deadline registered
[    0.664494] io scheduler cfq registered (default)
[    0.664495] io scheduler mq-deadline registered
[    0.664707] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.664724] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.664868] pcieport 0000:00:1c.3: Signaling PME with IRQ 25
[    0.664907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.664915] intel_idle: MWAIT substates: 0x42120
[    0.664915] intel_idle: v0.4.1 model 0x3C
[    0.665012] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.665175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.665460] Linux agpgart interface v0.103
[    0.665486] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.665486] AMD IOMMUv2 functionality not available on this system
[    0.665652] i8042: PNP: No PS/2 controller found.
[    0.665684] mousedev: PS/2 mouse device common for all mice
[    0.665704] rtc_cmos 00:02: RTC can wake from S4
[    0.665821] rtc_cmos 00:02: registered as rtc0
[    0.665831] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.665837] intel_pstate: Intel P-state driver initializing
[    0.666015] ledtrig-cpu: registered to indicate activity on CPUs
[    0.667175] NET: Registered protocol family 10
[    0.682169] Segment Routing with IPv6
[    0.682185] mip6: Mobile IPv6
[    0.682187] NET: Registered protocol family 17
[    0.682212] mpls_gso: MPLS GSO support
[    0.682357] mce: Using 7 MCE banks
[    0.682398] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    0.682453] microcode: Microcode Update Driver: v2.2.
[    0.682461] sched_clock: Marking stable (680579297, 1871200)->(1656762462, -974311965)
[    0.682588] registered taskstats version 1
[    0.682588] Loading compiled-in X.509 certificates
[    0.709860] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    0.709872] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    0.709886] zswap: loaded using pool lzo/zbud
[    0.709952] AppArmor: AppArmor sha1 policy hashing enabled
[    0.710295] rtc_cmos 00:02: setting system clock to 2020-07-01 07:43:52 UTC (1593589432)
[    0.711131] Freeing unused kernel image memory: 1588K
[    0.745433] Write protecting the kernel read-only data: 16384k
[    0.746165] Freeing unused kernel image memory: 2028K
[    0.746424] Freeing unused kernel image memory: 780K
[    0.756688] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.756689] x86/mm: Checking user space page tables
[    0.763179] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.763181] Run /init as init process
[    0.774860] udevd[99]: starting version 3.2.7
[    0.775623] udevd[100]: starting eudev-3.2.7
[    0.797771] thermal LNXTHERM:00: registered as thermal_zone0
[    0.797772] ACPI: Thermal Zone [TZ00] (28 C)
[    0.798007] thermal LNXTHERM:01: registered as thermal_zone1
[    0.798008] ACPI: Thermal Zone [TZ01] (30 C)
[    0.803385] ACPI: bus type USB registered
[    0.803405] usbcore: registered new interface driver usbfs
[    0.803413] usbcore: registered new interface driver hub
[    0.803435] usbcore: registered new device driver usb
[    0.808175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.808908] ehci-pci: EHCI PCI platform driver
[    0.809045] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.809051] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.809062] ehci-pci 0000:00:1a.0: debug port 2
[    0.809305] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213)
[    0.809309] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.809311] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213)
[    0.809313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.809313] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213)
[    0.809315] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213)
[    0.809316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.809316] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180810/utaddress-213)
[    0.809318] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180810/utaddress-213)
[    0.809319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.809319] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.811176] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    0.811205] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.811515] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.812966] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.812977] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
[    0.818185] cryptd: max_cpu_qlen set to 1000
[    0.818254] SCSI subsystem initialized
[    0.829876] AVX2 version of gcm_enc/dec engaged.
[    0.829877] AES CTR mode by8 optimization enabled
[    0.832634] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.832677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.832678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.832680] usb usb1: Product: EHCI Host Controller
[    0.832681] usb usb1: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
[    0.832682] usb usb1: SerialNumber: 0000:00:1a.0
[    0.833559] libata version 3.00 loaded.
[    0.834521] hub 1-0:1.0: USB hub found
[    0.834528] hub 1-0:1.0: 2 ports detected
[    0.834786] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.834792] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.835851] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.835857] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.836019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.836020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.836021] usb usb2: Product: xHCI Host Controller
[    0.836023] usb usb2: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
[    0.836024] usb usb2: SerialNumber: 0000:00:14.0
[    0.836119] hub 2-0:1.0: USB hub found
[    0.836128] hub 2-0:1.0: 10 ports detected
[    0.837674] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.837678] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.837682] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.837718] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    0.837719] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.837720] usb usb3: Product: xHCI Host Controller
[    0.837722] usb usb3: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd
[    0.837723] usb usb3: SerialNumber: 0000:00:14.0
[    0.837738] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.837817] hub 3-0:1.0: USB hub found
[    0.837826] hub 3-0:1.0: 2 ports detected
[    0.838117] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.838128] ehci-pci 0000:00:1d.0: debug port 2
[    0.838260] ahci 0000:00:1f.2: version 3.0
[    0.838419] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    0.838421] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems 
[    0.842049] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.842065] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
[    0.847356] libphy: r8169: probed
[    0.847594] r8169 0000:02:00.0 eth0: RTL8168g/8111g, f8:bc:12:68:60:c1, XID 4c000800, IRQ 28
[    0.847596] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.849709] scsi host0: ahci
[    0.849880] scsi host1: ahci
[    0.849959] scsi host2: ahci
[    0.850035] scsi host3: ahci
[    0.850084] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 27
[    0.850086] ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 27
[    0.850087] ata3: DUMMY
[    0.850088] ata4: DUMMY
[    0.857361] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.857438] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.857440] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.857442] usb usb4: Product: EHCI Host Controller
[    0.857443] usb usb4: Manufacturer: Linux 4.19.0-9-amd64 ehci_hcd
[    0.857444] usb usb4: SerialNumber: 0000:00:1d.0
[    0.857585] hub 4-0:1.0: USB hub found
[    0.857592] hub 4-0:1.0: 2 ports detected
[    1.165452] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.165488] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.166911] ata2.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
[    1.166917] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.168488] ata2.00: configured for UDMA/133
[    1.168772] ata1.00: ATAPI: PLDS DVD+/-RW DH-16AES, 3D11, max UDMA/100
[    1.169414] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.170036] ata1.00: configured for UDMA/100
[    1.172530] scsi 0:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16AES 3D11 PQ: 0 ANSI: 5
[    1.173454] usb 3-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.193424] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.195004] usb 3-1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10
[    1.195008] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.195011] usb 3-1: Product: DataTraveler 3.0
[    1.195014] usb 3-1: Manufacturer: Kingston
[    1.195017] usb 3-1: SerialNumber: 08606E6D3FDEB0A1E827E93B
[    1.201341] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 0A01 PQ: 0 ANSI: 5
[    1.209163] usb-storage 3-1:1.0: USB Mass Storage device detected
[    1.209307] scsi host4: usb-storage 3-1:1.0
[    1.209392] usbcore: registered new interface driver usb-storage
[    1.209819] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.209824] sd 1:0:0:0: [sda] Write Protect is off
[    1.209825] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.209833] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.210619] usbcore: registered new interface driver uas
[    1.250927] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.250930] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.251198] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.253654] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.253785] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.264770]  sda: sda1 sda2 < sda5 >
[    1.265054] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.321445] usb 2-3: new low-speed USB device number 2 using xhci_hcd
[    1.326019] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    1.326024] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.326424] hub 1-1:1.0: USB hub found
[    1.326489] hub 1-1:1.0: 4 ports detected
[    1.349788] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    1.349792] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.350647] hub 4-1:1.0: USB hub found
[    1.351007] hub 4-1:1.0: 6 ports detected
[    1.478369] usb 2-3: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.78
[    1.478371] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.478372] usb 2-3: Product: Dell USB Entry Keyboard
[    1.478373] usb 2-3: Manufacturer: DELL
[    1.482875] hidraw: raw HID events driver (C) Jiri Kosina
[    1.488271] usbcore: registered new interface driver usbhid
[    1.488271] usbhid: USB HID core driver
[    1.489513] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:413C:2107.0001/input/input0
[    1.549462] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-3/input0
[    1.561357] tsc: Refined TSC clocksource calibration: 3392.145 MHz
[    1.561361] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e55212bb0, max_idle_ns: 440795241820 ns
[    1.561369] clocksource: Switched to clocksource tsc
[    1.605421] usb 2-4: new low-speed USB device number 3 using xhci_hcd
[    1.757535] usb 2-4: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[    1.757539] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.757541] usb 2-4: Product: Dell MS116 USB Optical Mouse
[    1.757543] usb 2-4: Manufacturer: PixArt
[    1.760462] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:413C:301A.0002/input/input1
[    1.760626] hid-generic 0003:413C:301A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-4/input0
[    1.772139] PM: Image not found (code -22)
[    1.885429] usb 2-10: new full-speed USB device number 4 using xhci_hcd
[    2.034950] usb 2-10: New USB device found, idVendor=0d8c, idProduct=0139, bcdDevice= 1.00
[    2.034952] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.034954] usb 2-10: Product: USB PnP Sound Device
[    2.034955] usb 2-10: Manufacturer: C-Media Electronics Inc.      
[    2.036716] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.3/0003:0D8C:0139.0003/input/input2
[    2.052583] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.093642] hid-generic 0003:0D8C:0139.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:00:14.0-10/input3
[    2.235241] scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    2.235499] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.236418] sd 4:0:0:0: [sdb] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
[    2.236921] sd 4:0:0:0: [sdb] Write Protect is off
[    2.236922] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
[    2.237073] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.240050]  sdb: sdb1
[    2.241399] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    4.272940] udevd[433]: starting version 3.2.7
[    4.573997] udevd[433]: specified group 'kvm' unknown
[    5.120922] udevd[433]: starting eudev-3.2.7
[    5.458013] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.458029] ACPI: Power Button [PWRB]
[    5.458082] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.458101] ACPI: Power Button [PWRF]
[    5.836751] iTCO_vendor_support: vendor-support=0
[    5.839042] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.839113] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    5.839294] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.850301] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.048950] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.048952] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.048952] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.048953] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.048953] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.489688] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    6.893440] [drm] PipeC fused off
[    6.893451] [drm] Replacing VGA console driver
[    6.894467] Console: switching to colour dummy device 80x25
[    6.895004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.895005] [drm] Driver supports precise vblank timestamp query.
[    6.895174] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.065886] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    7.066764] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.066939] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    7.067026] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.090917] fbcon: inteldrmfb (fb0) is primary device
[    7.164832] Console: switching to colour frame buffer device 200x56
[    7.183437] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.239043] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[    7.239074] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[    7.239101] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[    7.566366] usbcore: registered new interface driver snd-usb-audio
[    8.015877] intel_rapl: Found RAPL domain package
[    8.015878] intel_rapl: Found RAPL domain core
[    8.015878] intel_rapl: Found RAPL domain uncore
[    8.015879] intel_rapl: Found RAPL domain dram
[    8.015880] intel_rapl: RAPL package 0 domain package locked by BIOS
[    8.015884] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   11.312649] Adding 8303612k swap on /dev/sda5.  Priority:-2 extents:1 across:8303612k FS
[   11.383696] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.978655] lp: driver loaded but no devices found
[   11.993111] ppdev: user-space parallel port driver
[   12.917295] audit: type=1400 audit(1593589444.203:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1199 comm="apparmor_parser"
[   12.918218] audit: type=1400 audit(1593589444.207:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1202 comm="apparmor_parser"
[   12.918220] audit: type=1400 audit(1593589444.207:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1202 comm="apparmor_parser"
[   12.948456] audit: type=1400 audit(1593589444.235:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1201 comm="apparmor_parser"
[   12.948459] audit: type=1400 audit(1593589444.235:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1201 comm="apparmor_parser"
[   12.948460] audit: type=1400 audit(1593589444.235:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1201 comm="apparmor_parser"
[   12.990698] audit: type=1400 audit(1593589444.279:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1204 comm="apparmor_parser"
[   12.990700] audit: type=1400 audit(1593589444.279:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1204 comm="apparmor_parser"
[   12.990701] audit: type=1400 audit(1593589444.279:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1204 comm="apparmor_parser"
[   13.000576] audit: type=1400 audit(1593589444.287:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1205 comm="apparmor_parser"
[   19.360482] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.441249] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[   19.441456] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   19.542305] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   19.575705] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.576226] r8169 0000:02:00.0 eth0: Link is Down
[   19.837260] Bluetooth: Core ver 2.22
[   19.837271] NET: Registered protocol family 31
[   19.837271] Bluetooth: HCI device and connection manager initialized
[   19.837274] Bluetooth: HCI socket layer initialized
[   19.837275] Bluetooth: L2CAP socket layer initialized
[   19.837278] Bluetooth: SCO socket layer initialized
[   20.651627] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.651630] Bluetooth: BNEP filters: protocol multicast
[   20.651637] Bluetooth: BNEP socket layer initialized
[   22.344891] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   22.344900] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.415040] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[   22.964141] elogind[1886]: New seat seat0.
[   23.020353] elogind[1886]: Watching system buttons on /dev/input/event4 (Power Button)
[   23.053579] elogind[1886]: Watching system buttons on /dev/input/event3 (Power Button)
[   23.241589] elogind[1886]: Watching system buttons on /dev/input/event0 (DELL Dell USB Entry Keyboard)
[   24.875906] kauditd_printk_skb: 7 callbacks suppressed
[   24.875908] audit: type=1400 audit(1593589456.163:19): apparmor="DENIED" operation="mknod" profile="/usr/sbin/haveged" name="/run/haveged.pid" pid=2203 comm="haveged" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
[   30.256406] elogind[1886]: New session 1 of user user.
[   36.548687] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=555597 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   36.548698] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=565763 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   36.558901] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=555597 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   36.558917] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=565763 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   38.668906] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:55:e0:13:08:00 SRC=10.85.5.23 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=33211 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   38.668951] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:4e:26:91:08:00 SRC=10.85.5.18 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=29275 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   38.668974] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:8d:c6:08:00 SRC=10.85.5.16 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=24088 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   38.668993] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:7d:8d:08:00 SRC=10.85.5.25 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=913 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   38.669020] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:c8:d9:d2:c9:22:71:08:00 SRC=10.85.5.24 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=40577 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   39.669074] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:55:e0:13:08:00 SRC=10.85.5.23 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=33706 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   39.669090] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:4e:26:91:08:00 SRC=10.85.5.18 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=30120 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   39.669101] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:8d:c6:08:00 SRC=10.85.5.16 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=24796 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   39.669112] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:c8:d9:d2:c9:22:71:08:00 SRC=10.85.5.24 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=41094 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[   39.669123] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:7d:8d:08:00 SRC=10.85.5.25 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=1017 PROTO=UDP SPT=161 DPT=34067 LEN=194 
[  197.387762] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:4c:4e:35:44:05:32:08:00 SRC=58.32.64.168 DST=10.85.2.30 LEN=86 TOS=0x00 PREC=0x00 TTL=51 ID=46294 DF PROTO=UDP SPT=51413 DPT=8999 LEN=66 
[  272.252794] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:4c:4e:35:44:05:32:08:00 SRC=86.139.12.151 DST=10.85.2.30 LEN=129 TOS=0x00 PREC=0x00 TTL=54 ID=46063 DF PROTO=UDP SPT=6881 DPT=8999 LEN=109 
[  462.798348] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:1c:23:df:aa:22:08:00 SRC=10.85.2.12 DST=239.255.255.250 LEN=666 TOS=0x00 PREC=0x00 TTL=1 ID=1266 PROTO=UDP SPT=55636 DPT=3702 LEN=646 
[  462.798406] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:1c:23:df:aa:22:08:00 SRC=10.85.2.12 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=1265 PROTO=UDP SPT=55638 DPT=3702 LEN=664 
[  462.859724] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:1c:23:df:aa:22:08:00 SRC=10.85.2.12 DST=239.255.255.250 LEN=666 TOS=0x00 PREC=0x00 TTL=1 ID=1267 PROTO=UDP SPT=55636 DPT=3702 LEN=646 
[  462.968836] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:1c:23:df:aa:22:08:00 SRC=10.85.2.12 DST=239.255.255.250 LEN=684 TOS=0x00 PREC=0x00 TTL=1 ID=1270 PROTO=UDP SPT=55638 DPT=3702 LEN=664 
[ 2544.343520] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:50:56:82:46:f6:08:00 SRC=10.85.2.65 DST=239.255.255.250 LEN=1026 TOS=0x00 PREC=0x00 TTL=1 ID=22404 PROTO=UDP SPT=53172 DPT=3702 LEN=1006 
[ 2544.444104] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:50:56:82:46:f6:08:00 SRC=10.85.2.65 DST=239.255.255.250 LEN=1026 TOS=0x00 PREC=0x00 TTL=1 ID=22405 PROTO=UDP SPT=53172 DPT=3702 LEN=1006 
[ 3437.923129] fuse init (API version 7.27)
[ 3925.764870] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:4c:4e:35:44:05:32:08:00 SRC=79.69.158.144 DST=10.85.2.30 LEN=132 TOS=0x00 PREC=0x00 TTL=56 ID=31167 DF PROTO=UDP SPT=6881 DPT=8999 LEN=112 
[ 4331.325344] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:7f:ff:fa:00:50:56:82:46:f6:08:00 SRC=10.85.2.65 DST=239.255.255.250 LEN=806 TOS=0x00 PREC=0x00 TTL=1 ID=22670 PROTO=UDP SPT=53172 DPT=3702 LEN=786 
[ 4350.319843] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:4c:4e:35:44:05:32:08:00 SRC=42.2.127.147 DST=10.85.2.30 LEN=129 TOS=0x00 PREC=0x00 TTL=53 ID=39183 DF PROTO=UDP SPT=6881 DPT=8999 LEN=109 
[ 4487.416203] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:4c:4e:35:44:05:32:08:00 SRC=86.139.12.151 DST=10.85.2.30 LEN=129 TOS=0x00 PREC=0x00 TTL=54 ID=58154 DF PROTO=UDP SPT=6881 DPT=8999 LEN=109 
[ 4601.583261] usb 2-10: USB disconnect, device number 4
[ 4601.608567] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=555597 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 4601.608577] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=565763 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 4601.619450] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=555597 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 4601.619477] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=565763 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 4602.152310] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:55:e0:13:08:00 SRC=10.85.5.23 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=55609 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4602.152496] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:8d:c6:08:00 SRC=10.85.5.16 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=25484 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4602.152674] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:c8:d9:d2:c9:22:71:08:00 SRC=10.85.5.24 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=47920 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4602.153026] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:4e:26:91:08:00 SRC=10.85.5.18 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=46044 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4602.153215] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:7d:8d:08:00 SRC=10.85.5.25 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=52732 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4603.142170] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:4e:26:91:08:00 SRC=10.85.5.18 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=47001 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4603.142208] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:c8:d9:d2:c9:22:71:08:00 SRC=10.85.5.24 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=48051 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4603.142235] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:8d:c6:08:00 SRC=10.85.5.16 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=26042 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4603.142261] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:ec:8e:b5:c0:7d:8d:08:00 SRC=10.85.5.25 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=53430 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4603.142286] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:55:e0:13:08:00 SRC=10.85.5.23 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=56184 PROTO=UDP SPT=161 DPT=52970 LEN=194 
[ 4627.805260] usb 2-10: new full-speed USB device number 5 using xhci_hcd
[ 4627.954609] usb 2-10: New USB device found, idVendor=0d8c, idProduct=0139, bcdDevice= 1.00
[ 4627.954615] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4627.954618] usb 2-10: Product: USB PnP Sound Device
[ 4627.954621] usb 2-10: Manufacturer: C-Media Electronics Inc.      
[ 4627.961818] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10:1.3/0003:0D8C:0139.0004/input/input10
[ 4628.021569] hid-generic 0003:0D8C:0139.0004: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:00:14.0-10/input3
[ 4628.051995] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=555597 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 4628.052005] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=565763 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 4628.062120] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=555597 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[ 4628.062133] [UFW BLOCK] IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:fabc:12ff:fe68:60c1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=565763 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[ 4628.584744] [UFW BLOCK] IN=eth0 OUT= MAC=f8:bc:12:68:60:c1:84:a9:3e:55:e0:13:08:00 SRC=10.85.5.23 DST=10.85.2.30 LEN=214 TOS=0x00 PREC=0x00 TTL=64 ID=65095 PROTO=UDP SPT=161 DPT=43843 LEN=194

#10 Re: Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 08:48:25

zerrax
speaker-test -c 2 -D hw:Device -r 48000 -t sine -f 440

When I type this command I do hear sound, but in Devuan there is no audio device visible....

"lsusb" command gives:

Bus 002 Device 004: ID 0d8c:0139 C-Media Electronics, Inc. Multimedia Headset [Gigaware by Ignition L.P.]

(I'm testing now, not the FSF certified one, but the "SWEEX" one (looks similar) type: SC010V2)

#11 Hardware & System Configuration » PnP USB Audio Device doesn't work » 2020-07-01 08:23:38

zerrax
Replies: 12

I bought a FSF certified USB audio dongle, and yesterday I received it, but when I tested it
I still didn't have sound on my Devuan Beowulf computer

The dongle is of the brand: "Sabrent" type: AU-MMSA

I also tried other USB Audio Adapters from other brand, but still no audio device detected
I think it's a software config problem, not hardware
Can anybody help me?

Pages: 1

Board footer

Forum Software