The officially official Devuan Forum!

You are not logged in.

#1 Re: ARM Builds » [SOLVED] tio /dev/ttyUSB0 not working ( RPi2 ) » 2023-02-14 15:22:31

I added
T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
in /etc/inittab, and WORKING !!!

cmdline.txt

root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes console=tty1 elevator=noop raid=noautodetect net.ifnames=0 biosdevname=0 noswap

config.txt

disable_overscan=1
hdmi_drive=2
config_hdmi_boost=4
dtparam=audio=on

[pi2]
max_usb_current=1
#pour branchement sur HDMI3 / ARC
hdmi_group=1
hdmi_mode=31

[pi4]
dtoverlay=vc4-fkms-v3d
dtoverlay=disable-bt
#dtoverlay=disable-wifi
max_framebuffers=2
gpu_mem=320

[all]

/etc/inittab

#1:2345:respawn:/sbin/getty --noclear --noclear 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
...
6:23:respawn:/sbin/getty 38400 tty6

# Example how to put a getty on a serial line (for a terminal)
T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100

#2 ARM Builds » [SOLVED] tio /dev/ttyUSB0 not working ( RPi2 ) » 2023-02-14 14:33:57

nenesse
Replies: 1

Good morning,

I am trying to install chimaera on an Rpi2.
I prepared an sdcard via chroot from my PC.
the RPi boots correctly, starts the ssh server and a working Xorg session.

But from my PC tio /dev/ttyUSB0 not working.
the PC can connect and disconnect, but no input is received by the RPi.

I prepared another sdcard by copying the image downloads.raspberrypi.org/.../2022-09-22-raspios-buster-armhf-lite.img.xz
it uses systemd as init.
tio /dev/ttyUSB0 works perfectly.

I added
T0:23:respawn:/sbin/agetty -o -p -- \u --keep-baud 115200,57600,38400,9600 ttyAMA0 vt220
in /etc/inittab.
no change, not working.

thanks

#3 Re: Installation » [SOLVED] apt-get update: gpg error (expired key) » 2022-09-03 16:21:07

yes, extra steps for 2022.09.03.deb, not needed with 2022.09.04.deb.
I mark this post solved, thanks to the developers for the speed.

rendez-vous le 3 septembre 2023 smile

#4 Re: Installation » [SOLVED] apt-get update: gpg error (expired key) » 2022-09-03 15:55:40

yes
then copying /usr/share/keyrings/devuan-keyring.gpg => /etc/apt/trusted.gpg.d
and deleting /etc/apt/trusted.gpg.d/devuan-keyring-2017-archive.gpg
apt-get update works.

Temporary solution pending that of the developers.

#5 Re: Installation » [SOLVED] apt-get update: gpg error (expired key) » 2022-09-03 14:03:53

apt-cache policy devuan-keyring
devuan-keyring:
  Installé : 2022.09.03
  Candidat : 2022.09.03
Table de version :
*** 2022.09.03 100
        100 /var/lib/dpkg/status
     2017.10.03 500
        500 http://deb.devuan.org/merged chimaera/main amd64 Packages

gpg --keyserver keys.gnupg.net --search-keys BB23C00C61FC752C
gpg: error searching keyserver: Server indicated a failure
gpg: keyserver search failed: Server indicated a failure

#6 Re: Installation » [SOLVED] apt-get update: gpg error (expired key) » 2022-09-03 12:03:32

i flush nftables  ruleset
I have stopped privoxy and unbound

└─┤ cat /etc/{nsswitch,resolv}.conf
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

passwd:         files
group:          files
shadow:         files
gshadow:        files

hosts:          files dns
networks:       files

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

netgroup:       nis
# freebox sur le réseau local
# ou sur réseau extérieur, réseau local en 172.16
# ou 4G Free
nameserver 212.27.40.240
nameserver 212.27.40.241

# partage de connexion smartphone android, autre que free
#nameserver 192.168.42.129

# openDns
#nameserver 208.67.222.222
#nameserver 208.67.220.220

# Raspberry Netgear
#nameserver 192.168.0.1

# unbound
#nameserver 127.0.0.1

#8 Installation » [SOLVED] apt-get update: gpg error (expired key) » 2022-09-03 11:15:26

nenesse
Replies: 25

Hi,
problems with apt-get today

apt-get update
Get:1 http://deb.devuan.org/merged chimaera InRelease [33.9 kB]
Get:2 http://deb.devuan.org/merged chimaera-security InRelease [26.5 kB]
Err:1 http://deb.devuan.org/merged chimaera InRelease
  The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
Get:3 http://deb.devuan.org/merged chimaera-backports InRelease [26.6 kB]
Err:2 http://deb.devuan.org/merged chimaera-security InRelease
  The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
Err:3 http://deb.devuan.org/merged chimaera-backports InRelease
  The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
Fetched 86.9 kB in 0s (174 kB/s)
Reading package lists... Done
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://deb.devuan.org/merged chimaera InRelease: The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository
(Amprolla3 on Nemesis) <repository@devuan.org>
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://deb.devuan.org/merged chimaera-security InRelease: The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://deb.devuan.org/merged chimaera-backports InRelease: The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
W: Failed to fetch http://deb.devuan.org/merged/dists/chimaera/InRelease  The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
W: Failed to fetch http://deb.devuan.org/merged/dists/chim … /InRelease  The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
W: Failed to fetch http://deb.devuan.org/merged/dists/chim … /InRelease  The following signatures were invalid: EXPKEYSIG BB23C00C61FC752C Devuan Repository (Amprolla3 on Nemesis) <repository@devuan.org>
W: Some index files failed to download. They have been ignored, or old ones used instead.

gpg --keyserver keys.gnupg.net --search-keys BB23C00C61FC752C
gpg: error searching keyserver: Server indicated a failure
gpg: keyserver search failed: Server indicated a failure

#9 Re: Hardware & System Configuration » (solved) Beowulf/RPi4 Xorg black screen » 2020-01-12 15:02:46

ubik post gave me the solution.
You have to install :
libgl1-mesa-dri_19.2.0~rc1-1~bpo10+1~rpt3_armhf.deb
libglapi-mesa_19.2.0~rc1-1~bpo10+1~rpt3_armhf.deb
libglx-mesa0_19.2.0~rc1-1~bpo10+1~rpt3_armhf.deb
from http://archive.raspberrypi.org/debian/pool/main/m/mesa
and
libllvm8_8.0.1-3~bpo10+1_armhf.deb
llvm-8_8.0.1-3~bpo10+1_armhf.deb
llvm-8-runtime_8.0.1-3~bpo10+1_armhf.deb
from http://ftp.nl.debian.org/debian/pool/ma … olchain-8/

#10 Hardware & System Configuration » (solved) Beowulf/RPi4 Xorg black screen » 2020-01-10 16:09:59

nenesse
Replies: 1

Hi,

I installed beowulf on an RPi 4. It works fine in tty, but I only have a black screen with xorg. I tried with .xinitrc and mate+lightdm. Both gave the same result : black screen.
.xinitrc

exec xterm & sleep 10

Xorg0.log

 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
 Build Operating System: Linux 4.9.0-8-arm64 armv8l Debian
 Current Operating System: Linux RPi-4 4.19.75-v7l+ #1270 SMP Tue Sep 24 18:51:41 BST 2019 armv7l
 Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M video=HDMI-A-1:1920x1080M@50,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:0D:02:34 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/sda3 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 elevator=noop raid=noautodetect noswap
 Build Date: 05 March 2019  08:11:12PM
 xorg-server 2:1.20.4-1 (https://www.debian.org/support) 
 Current version of pixman: 0.36.0
 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
 Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 (==) Log file: "/home/aviolleau/.local/share/xorg/Xorg.0.log", Time: Thu Jan  1 01:01:04 1970
 (==) Using system config directory "/usr/share/X11/xorg.conf.d"
 (==) No Layout section.  Using the first Screen section.
 (==) No screen section available. Using defaults.
 (**) |-->Screen "Default Screen Section" (0)
 (**) |   |-->Monitor "<default monitor>"
 (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
 (==) Automatically adding devices
 (==) Automatically enabling devices
 (==) Automatically adding GPU devices
 (==) Max clients allowed: 256, resource mask: 0x1fffff
 (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
 	Entry deleted from font path.
 (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
 (==) ModulePath set to "/usr/lib/xorg/modules"
 (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
 (II) Loader magic: 0x663f98
 (II) Module ABI versions:
 	X.Org ANSI C Emulation: 0.4
 	X.Org Video Driver: 24.0
 	X.Org XInput driver : 24.1
 	X.Org Server Extension : 10.0
 (++) using VT number 1

 (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
 (II) xfree86: Adding drm device (/dev/dri/card1)
 (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
 (II) xfree86: Adding drm device (/dev/dri/card0)
 (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
 (II) no primary bus or device found
 	falling back to /sys/devices/platform/soc/soc:gpu/drm/card1
 (II) LoadModule: "glx"
 (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 (II) Module glx: vendor="X.Org Foundation"
 	compiled for 1.20.4, module version = 1.0.0
 	ABI class: X.Org Server Extension, version 10.0
 (==) Matched modesetting as autoconfigured driver 0
 (==) Matched fbdev as autoconfigured driver 1
 (==) Assigned the driver to the xf86ConfigLayout
 (II) LoadModule: "modesetting"
 (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
 (II) Module modesetting: vendor="X.Org Foundation"
 	compiled for 1.20.4, module version = 1.20.4
 	Module class: X.Org Video Driver
 	ABI class: X.Org Video Driver, version 24.0
 (II) LoadModule: "fbdev"
 (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
 (II) Module fbdev: vendor="X.Org Foundation"
 	compiled for 1.20.0, module version = 0.5.0
 	Module class: X.Org Video Driver
 	ABI class: X.Org Video Driver, version 24.0
 (II) modesetting: Driver for Modesetting Kernel Drivers: kms
 (II) FBDEV: driver for framebuffer: fbdev
 (II) modeset(0): using drv /dev/dri/card1
 (WW) Falling back to old probe method for fbdev
 (II) Loading sub module "fbdevhw"
 (II) LoadModule: "fbdevhw"
 (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
 (II) Module fbdevhw: vendor="X.Org Foundation"
 	compiled for 1.20.4, module version = 0.0.2
 	ABI class: X.Org Video Driver, version 24.0
 (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
 (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
 (==) modeset(0): Depth 24, (==) framebuffer bpp 32
 (==) modeset(0): RGB weight 888
 (==) modeset(0): Default visual is TrueColor
 (II) Loading sub module "glamoregl"
 (II) LoadModule: "glamoregl"
 (II) Loading /usr/lib/xorg/modules/libglamoregl.so
 (II) Module glamoregl: vendor="X.Org Foundation"
 	compiled for 1.20.4, module version = 1.0.1
 	ABI class: X.Org ANSI C Emulation, version 0.4
 (II) modeset(0): glamor X acceleration enabled on VC4 V3D 2.1
 (II) modeset(0): glamor initialized
 (II) modeset(0): Output HDMI-1 has no monitor section
 (II) modeset(0): EDID for output HDMI-1
 (II) modeset(0): Manufacturer: SNY  Model: 4b03  Serial#: 16843009
 (II) modeset(0): Year: 2014  Week: 1
 (II) modeset(0): EDID Version: 1.3
 (II) modeset(0): Digital Display Input
: horiz.: 89  vert.: 50
 (II) modeset(0): Gamma: 2.20
 (II) modeset(0): No DPMS capabilities specified
 (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
 (II) modeset(0): First detailed timing is preferred mode
 (II) modeset(0): redX: 0.625 redY: 0.340   greenX: 0.280 greenY: 0.595
 (II) modeset(0): blueX: 0.155 blueY: 0.070   whiteX: 0.283 whiteY: 0.298
 (II) modeset(0): Supported established timings:
 (II) modeset(0): 640x480@60Hz
 (II) modeset(0): 800x600@60Hz
 (II) modeset(0): 1024x768@60Hz
 (II) modeset(0): Manufacturer's mask: 0
 (II) modeset(0): Supported standard timings:
 (II) modeset(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
 (II) modeset(0): #1: hsize: 1600  vsize 900  refresh: 60  vid: 49321
 (II) modeset(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
 (II) modeset(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
 (II) modeset(0): Supported detailed timing:
 (II) modeset(0): clock: 148.5 MHz   Image Size:  886 x 498 mm
 (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
 (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
 (II) modeset(0): Supported detailed timing:
 (II) modeset(0): clock: 74.2 MHz   Image Size:  886 x 498 mm
 (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
 (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
 (II) modeset(0): Monitor name: SONY TV
 (II) modeset(0): Ranges: V min: 48 V max: 62 Hz, H min: 14 H max: 70 kHz, PixClock max 155 MHz
 (II) modeset(0): Supported detailed timing:
 (II) modeset(0): clock: 148.5 MHz   Image Size:  886 x 498 mm
 (II) modeset(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
 (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
 (II) modeset(0): Supported detailed timing:
 (II) modeset(0): clock: 74.2 MHz   Image Size:  886 x 498 mm
 (II) modeset(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
 (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
 (II) modeset(0): Supported detailed timing:
 (II) modeset(0): clock: 74.2 MHz   Image Size:  886 x 498 mm
 (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
 (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
 (II) modeset(0): Supported detailed timing:
 (II) modeset(0): clock: 74.2 MHz   Image Size:  886 x 498 mm
 (II) modeset(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
 (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
 (II) modeset(0): Number of EDID sections to follow: 1
 (II) modeset(0): EDID (in hex):
 (II) modeset(0): 	00ffffffffffff004dd9034b01010101
 (II) modeset(0): 	01180103805932780a0dc9a057479827
 (II) modeset(0): 	12484c2108008180a9c0714fb3000101
 (II) modeset(0): 	010101010101023a801871382d40582c
 (II) modeset(0): 	450076f23100001e011d007251d01e20
 (II) modeset(0): 	6e28550076f23100001e000000fc0053
 (II) modeset(0): 	4f4e592054560a2020202020000000fd
 (II) modeset(0): 	00303e0e460f000a2020202020200110
 (II) modeset(0): 	02032ff0531f101405130420223c3e12
 (II) modeset(0): 	1603071115020601260d070715075083
 (II) modeset(0): 	0f000068030c001000b82d0fe200fb02
 (II) modeset(0): 	3a80d072382d40102c458076f2310000
 (II) modeset(0): 	1e011d00bc52d01e20b828554076f231
 (II) modeset(0): 	00001e011d8018711c1620582c250076
 (II) modeset(0): 	f23100009e011d80d0721c1620102c25
 (II) modeset(0): 	8076f23100009e000000000000000012
 (--) modeset(0): HDMI max TMDS frequency 225000KHz
 (II) modeset(0): Printing probed modes for output HDMI-1
 (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
 (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
 (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
 (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
 (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
 (II) modeset(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
 (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
 (II) modeset(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
 (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
 (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
 (II) modeset(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
 (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
 (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
 (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
 (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
 (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
 (II) modeset(0): Modeline "1280x720"x30.0   74.25  1280 3040 3080 3300  720 725 730 750 +hsync +vsync (22.5 kHz e)
 (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
 (II) modeset(0): Modeline "1280x720"x30.0   74.18  1280 3040 3080 3300  720 725 730 750 +hsync +vsync (22.5 kHz e)
 (II) modeset(0): Modeline "1280x720"x24.0   59.40  1280 3040 3080 3300  720 725 730 750 +hsync +vsync (18.0 kHz e)
 (II) modeset(0): Modeline "1280x720"x24.0   59.34  1280 3040 3080 3300  720 725 730 750 +hsync +vsync (18.0 kHz e)
 (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
 (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
 (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
 (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
 (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 (II) modeset(0): Output HDMI-1 connected
 (II) modeset(0): Using exact sizes for initial modes
 (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0
 (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
 (==) modeset(0): DPI set to (96, 96)
 (II) Loading sub module "fb"
 (II) LoadModule: "fb"
 (II) Loading /usr/lib/xorg/modules/libfb.so
 (II) Module fb: vendor="X.Org Foundation"
 	compiled for 1.20.4, module version = 1.0.0
 	ABI class: X.Org ANSI C Emulation, version 0.4
 (II) UnloadModule: "fbdev"
 (II) Unloading fbdev
 (II) UnloadSubModule: "fbdevhw"
 (II) Unloading fbdevhw
 (==) modeset(0): Backing store enabled
 (==) modeset(0): Silken mouse enabled
 (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
 (==) modeset(0): DPMS enabled
 Setup complete
   DRI driver: vc4
   VDPAU driver: vc4
 (II) Initializing extension Generic Event Extension
 (II) Initializing extension SHAPE
 (II) Initializing extension MIT-SHM
 (II) Initializing extension XInputExtension
 (II) Initializing extension XTEST
 (II) Initializing extension BIG-REQUESTS
 (II) Initializing extension SYNC
 (II) Initializing extension XKEYBOARD
 (II) Initializing extension XC-MISC
 (II) Initializing extension SECURITY
 (II) Initializing extension XFIXES
 (II) Initializing extension RENDER
 (II) Initializing extension RANDR
 (II) Initializing extension COMPOSITE
 (II) Initializing extension DAMAGE
 (II) Initializing extension MIT-SCREEN-SAVER
 (II) Initializing extension DOUBLE-BUFFER
 (II) Initializing extension RECORD
 (II) Initializing extension DPMS
 (II) Initializing extension Present
 (II) Initializing extension DRI3
 (II) Initializing extension X-Resource
 (II) Initializing extension XVideo
 (II) Initializing extension XVideo-MotionCompensation
 (II) Initializing extension SELinux
 (II) SELinux: Disabled on system
 (II) Initializing extension GLX
 (II) AIGLX: Loaded and initialized vc4
 (II) GLX: Initialized DRI2 GL provider for screen 0
 (II) Initializing extension XFree86-VidModeExtension
 (II) Initializing extension XFree86-DGA
 (II) Initializing extension XFree86-DRI
 (II) Initializing extension DRI2
 (II) modeset(0): Damage tracking initialized
 (II) modeset(0): Setting screen physical size to 508 x 285
 (II) config/udev: Adding input device   mini keyboard (/dev/input/event0)
 (**)   mini keyboard: Applying InputClass "libinput keyboard catchall"
 (II) LoadModule: "libinput"
 (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
 (II) Module libinput: vendor="X.Org Foundation"
 	compiled for 1.20.4, module version = 0.28.2
 	Module class: X.Org XInput Driver
 	ABI class: X.Org XInput driver, version 24.1
 (II) Using input driver 'libinput' for '  mini keyboard'
 (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
 (**)   mini keyboard: always reports core events
 (**) Option "Device" "/dev/input/event0"
 (**) Option "_source" "server/udev"
 (II) event0  -   mini keyboard: is tagged by udev as: Keyboard
 (II) event0  -   mini keyboard: device is a keyboard
 (II) event0  -   mini keyboard: device removed
 (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1997:2433.0001/input/input0/event0"
 (II) XINPUT: Adding extended input device "  mini keyboard" (type: KEYBOARD, id 6)
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "fr"
 (**) Option "xkb_variant" "oss_latin9"
 (II) event0  -   mini keyboard: is tagged by udev as: Keyboard
 (II) event0  -   mini keyboard: device is a keyboard
 (II) config/udev: Adding input device   mini keyboard Mouse (/dev/input/event1)
 (**)   mini keyboard Mouse: Applying InputClass "libinput pointer catchall"
 (II) Using input driver 'libinput' for '  mini keyboard Mouse'
 (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
 (**)   mini keyboard Mouse: always reports core events
 (**) Option "Device" "/dev/input/event1"
 (**) Option "_source" "server/udev"
 (II) event1  -   mini keyboard Mouse: is tagged by udev as: Mouse
 (II) event1  -   mini keyboard Mouse: device is a pointer
 (II) event1  -   mini keyboard Mouse: device removed
 (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input1/event1"
 (II) XINPUT: Adding extended input device "  mini keyboard Mouse" (type: MOUSE, id 7)
 (**) Option "AccelerationScheme" "none"
 (**)   mini keyboard Mouse: (accel) selected scheme none/0
 (**)   mini keyboard Mouse: (accel) acceleration factor: 2.000
 (**)   mini keyboard Mouse: (accel) acceleration threshold: 4
 (II) event1  -   mini keyboard Mouse: is tagged by udev as: Mouse
 (II) event1  -   mini keyboard Mouse: device is a pointer
 (II) config/udev: Adding input device   mini keyboard Mouse (/dev/input/mouse0)
 (II) No input driver specified, ignoring this device.
 (II) This device may have been added with another device file.
 (II) config/udev: Adding input device   mini keyboard System Control (/dev/input/event2)
 (**)   mini keyboard System Control: Applying InputClass "libinput keyboard catchall"
 (II) Using input driver 'libinput' for '  mini keyboard System Control'
 (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
 (**)   mini keyboard System Control: always reports core events
 (**) Option "Device" "/dev/input/event2"
 (**) Option "_source" "server/udev"
 (II) event2  -   mini keyboard System Control: is tagged by udev as: Keyboard
 (II) event2  -   mini keyboard System Control: device is a keyboard
 (II) event2  -   mini keyboard System Control: device removed
 (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input2/event2"
 (II) XINPUT: Adding extended input device "  mini keyboard System Control" (type: KEYBOARD, id 8)
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "fr"
 (**) Option "xkb_variant" "oss_latin9"
 (II) event2  -   mini keyboard System Control: is tagged by udev as: Keyboard
 (II) event2  -   mini keyboard System Control: device is a keyboard
 (II) config/udev: Adding input device   mini keyboard Consumer Control (/dev/input/event3)
 (**)   mini keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
 (II) Using input driver 'libinput' for '  mini keyboard Consumer Control'
 (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
 (**)   mini keyboard Consumer Control: always reports core events
 (**) Option "Device" "/dev/input/event3"
 (**) Option "_source" "server/udev"
 (II) event3  -   mini keyboard Consumer Control: is tagged by udev as: Keyboard
 (II) event3  -   mini keyboard Consumer Control: device is a keyboard
 (II) event3  -   mini keyboard Consumer Control: device removed
 (II) libinput:   mini keyboard Consumer Control: needs a virtual subdevice
 (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input3/event3"
 (II) XINPUT: Adding extended input device "  mini keyboard Consumer Control" (type: MOUSE, id 9)
 (**) Option "AccelerationScheme" "none"
 (**)   mini keyboard Consumer Control: (accel) selected scheme none/0
 (**)   mini keyboard Consumer Control: (accel) acceleration factor: 2.000
 (**)   mini keyboard Consumer Control: (accel) acceleration threshold: 4
 (II) event3  -   mini keyboard Consumer Control: is tagged by udev as: Keyboard
 (II) event3  -   mini keyboard Consumer Control: device is a keyboard
 (**)   mini keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
 (II) Using input driver 'libinput' for '  mini keyboard Consumer Control'
 (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67
 (**)   mini keyboard Consumer Control: always reports core events
 (**) Option "Device" "/dev/input/event3"
 (**) Option "_source" "_driver/libinput"
 (II) libinput:   mini keyboard Consumer Control: is a virtual subdevice
 (**) Option "config_info" "udev:/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input3/event3"
 (II) XINPUT: Adding extended input device "  mini keyboard Consumer Control" (type: KEYBOARD, id 10)
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "fr"
 (**) Option "xkb_variant" "oss_latin9"
 (II) modeset(0): Disabling kernel dirty updates, not required.
 (**) Option "fd" "25"
 (II) event0  -   mini keyboard: device removed
 (**) Option "fd" "28"
 (II) event1  -   mini keyboard Mouse: device removed
 (**) Option "fd" "29"
 (II) event2  -   mini keyboard System Control: device removed
 (**) Option "fd" "30"
 (**) Option "fd" "30"
 (II) event3  -   mini keyboard Consumer Control: device removed
 (II) UnloadModule: "libinput"
 (II) systemd-logind: not releasing fd for 13:67, still in use
 (II) UnloadModule: "libinput"
 (II) systemd-logind: releasing fd for 13:67
 (II) UnloadModule: "libinput"
 (II) systemd-logind: releasing fd for 13:66
 (II) UnloadModule: "libinput"
 (II) systemd-logind: releasing fd for 13:65
 (II) UnloadModule: "libinput"
 (II) systemd-logind: releasing fd for 13:64
 (II) Server terminated successfully (0). Closing log file.

This configuration works in archlinuxarm (systemd) on the same RPi4. Raspbian desktop also works.
This configuration works for beowulf on x86-64.

What did I forget?

Thanks

Board footer

Forum Software