The officially official Devuan Forum!

You are not logged in.

#1 2018-03-31 01:37:53

Panopticon
Member
Registered: 2018-01-27
Posts: 144  

[solved] Ascii - OpenRC - Dependency messages

Hi Forum,

I just started to see these messages upon boot, nothing seems to be wrong or not working but wondering why? Possibly something i have installed but not sure what it would be. I notice in rc.conf these messages can be turned off, i have also enabled boot logging.  Ive also seen in the first code block below come up when i installed inxi and bootlogd the last two programs i installed today.

insserv: warning: script 'savecache' missing LSB tags and overrides
 OpenRC 0.23 is starting up Linux 4.9.0-4-amd64 (x86_64)

 * /proc is already mounted
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ...
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> bootmisc.sh.
 * Solving the loop by breaking umountfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> networking u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs n> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs n> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> networking u> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> networking u> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> networking p> ifupdown u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> mountnfs-bootclean.sh p> mountnfs-bootclean u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> networking p> ifupdown u> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> umountfs u> networking p> ifupdown u> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> networking u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs n> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs n> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> networking u> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> networking u> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> networking p> ifupdown u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> mountnfs-bootclean.sh p> mountnfs-bootclean u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> networking p> ifupdown u> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> umountfs u> networking p> ifupdown u> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> checkfs n> mountall.sh p> mountall u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> networking u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs n> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs n> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> networking u> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> networking u> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> networking p> ifupdown u> mountnfs.sh p> mountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> mountnfs-bootclean.sh p> mountnfs-bootclean u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> networking p> ifupdown u> umountnfs.sh p> umountnfs u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks-early a> umountfs u> networking p> ifupdown u> umountnfs.sh p> umountnfs n> sendsigs u> bootmisc.sh.
 * Solving the loop by breaking umountfs u> mountnfs.sh.
 * Solving the loop by breaking networking u> mountnfs.sh.
 * Solving the loop by breaking sendsigs u> bootmisc.sh.
 * Solving the loop by breaking ifupdown u> mountnfs.sh.
 * Solving the loop by breaking mountnfs u> bootmisc.sh.
 * Solving the loop by breaking umountnfs u> bootmisc.sh.
 * Solving the loop by breaking mountnfs-bootclean u> bootmisc.sh.
 * Solving the loop by breaking mountall u> bootmisc.sh.
 * Found a solvable dependency loop: bootmisc.sh p> bootmisc n> live-tools a> umountroot n> cryptdisks a> checkfs n> mountall.sh p> mountall n> mountall-bootclean.sh p> mountall-bootclean u> bootmisc.sh.
 * Solving the loop by breaking mountall-bootclean u> bootmisc.sh.
 * Found a solvable dependency loop: checkfs.sh p> checkfs n> mountall.sh p> mountall u> live-tools a> umountroot n> umountfs u> hwclock.sh a> checkroot n> checkfs.sh.
 * Found a solvable dependency loop: checkfs.sh p> checkfs n> mountall.sh p> mountall u> live-tools a> umountroot n> cryptdisks a> umountfs u> hwclock.sh a> checkroot n> checkfs.sh.
 * Found a solvable dependency loop: checkfs.sh p> checkfs n> mountall.sh p> mountall u> live-tools a> umountroot n> cryptdisks-early a> umountfs u> hwclock.sh a> checkroot n> checkfs.sh.
 * Solving the loop by breaking umountfs u> hwclock.sh.
 * Solving the loop by breaking mountall u> live-tools.
 * Found a solvable dependency loop: cryptdisks a> umountfs u> live-tools a> umountroot n> cryptdisks.
 * Solving the loop by breaking umountfs u> live-tools.
 * Found a solvable dependency loop: cryptdisks a> umountfs u> rsyslog u> live-tools a> umountroot n> cryptdisks.
 * Solving the loop by breaking rsyslog u> live-tools.
 * Found a solvable dependency loop: cryptdisks a> umountfs u> mountnfs-bootclean.sh a> bootmisc n> live-tools a> umountroot n> cryptdisks.
 * Solving the loop by breaking umountfs u> mountnfs-bootclean.sh.
 * Found a solvable dependency loop: cryptdisks a> checkfs n> mountall.sh p> mountall u> mountnfs-bootclean.sh a> bootmisc n> live-tools a> umountroot n> cryptdisks.
 * Found a solvable dependency loop: cryptdisks a> checkfs n> mountall.sh p> mountall n> mountall-bootclean.sh a> bootmisc n> live-tools a> umountroot n> cryptdisks.
 * Found a solvable dependency loop: cryptdisks a> checkfs n> mountall.sh p> mountall n> mountall-bootclean.sh p> mountall-bootclean u> live-tools a> umountroot n> cryptdisks.
 * Solving the loop by breaking live-tools a> umountroot.
 * Solving the loop by breaking cryptdisks a> checkfs.
 * Solving the loop by breaking mountnfs-bootclean.sh a> bootmisc.
 [ ok ]
[....] Starting the hotplug events dispatcher: udevd[ ok .
[....] Synthesizing the initial hotplug events...[ ok done.
[....] Waiting for /dev to be fully populated...[ ok done.
[....] Setting up keyboard layout...[ ok done.
[....] Activating swap...[ ok done.
[....] Activating lvm and md swap...[ ok done.
[....] Checking file systems...fsck from util-linux 2.29.2
[ ok done.
[....] Cleaning up temporary files... /tmp[ ok .
[....] Mounting local filesystems...[ ok done.
[....] Activating swapfile swap...[ ok done.
[....] Cleaning up temporary files...[ ok .
[....] Cleaning up temporary files...[ ok .
[....] Setting up ALSA...[ ok done.
[....] Starting Braille terminal driver: brltty[ ok .
[....] Starting early crypto disks...[ ok done.
[....] Starting remaining crypto disks...[ ok done.
[info] Loading kernel module lp.
[info] Loading kernel module ppdev.
[info] Loading kernel module parport_pc.
[....] Setting kernel variables...[ ok done.
[....] Configuring network interfaces...[ ok done.
[....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok .

rc sysinit logging stopped at Sat Mar 31 11:55:39 2018


rc default logging started at Sat Mar 31 11:55:39 2018

[....] Starting enhanced syslogd: rsyslogd[ ok .
[....] Starting anac(h)ronistic cron: anacron[ ok .
[....] Starting system message bus: dbusUnknown group "network" in message bus configuration file
[ ok .
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ ok .
[....] Enabling additional executable binary formats: binfmt-support[ ok .
[....] Starting bluetooth: bluetoothd[ ok .
[....] Starting Connection Manager:[ ok .
[....] Setting up console font and keymap...[ ok done.
[....] Starting periodic command scheduler: cron[ ok .
[....] Starting Common Unix Printing System: cupsd[ ok .
[....] Starting CUPS Bonjour daemon: cups-browsed[ ok .
[....] Starting Bluetooth DUN daemon: dundee[ ok .
[....] Starting session management daemon: elogind[ ok .
[....] Starting MTA: exim4[ ok .
[info] Not starting fetchmail daemon, disabled via /etc/default/fetchmail.
[....] Starting mouse interface server: gpm[ ok .
[....] Starting UPnP devices daemon: MiniSSDPd[ ok .
[....] Starting oFono Mobile Telephony Daemon: ofonod[ ok .
[....] saned disabled; edit /etc/default/saned[ ok .
[....] Starting OpenBSD Secure Shell server: sshd[ ok .
[....] Starting uuid generator: uuidd[ ok .

rc default logging stopped at Sat Mar 31 11:55:44 2018
# Global OpenRC configuration settings

# Set to "YES" if you want the rc system to try and start services
# in parallel for a slight speed improvement. When running in parallel we
# prefix the service output with its name as the output will get
# jumbled up.
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
#rc_parallel="NO"

# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature. This feature is automatically disabled if rc_parallel is
# set to YES.
#rc_interactive="YES"

# If we need to drop to a shell, you can specify it here.
# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
# otherwise /bin/sh
# Linux users could specify /sbin/sulogin
#rc_shell=/bin/sh

# Do we allow any started service in the runlevel to satisfy the dependency
# or do we want all of them regardless of state? For example, if net.eth0
# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
# both will be started, but services that depend on 'net' will work if either
# one comes up. With rc_depend_strict="YES" we would require them both to
# come up.
#rc_depend_strict="YES"

# rc_hotplug controls which services we allow to be hotplugged.
# A hotplugged service is one started by a dynamic dev manager when a matching
# hardware device is found.
# Hotplugged services appear in the "hotplugged" runlevel.
# If rc_hotplug is set to any value, we compare the name of this service
# to every pattern in the value, from left to right, and we allow the
# service to be hotplugged if it matches a pattern, or if it matches no
# patterns. Patterns can include shell wildcards.
# To disable services from being hotplugged, prefix patterns with "!".
#If rc_hotplug is not set or is empty, all hotplugging is disabled.
# Example - rc_hotplug="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be hotplugged.
# Example - rc_hotplug="!net.*"
# This allows services that do not match "net.*" to be hotplugged.

# rc_logger launches a logging daemon to log the entire rc process to
# /var/log/rc.log
# NOTE: Linux systems require the devfs service to be started before
# logging can take place and as such cannot log the sysinit runlevel.
rc_logger="YES"

# Through rc_log_path you can specify a custom log file.
# The default value is: /var/log/rc.log
#rc_log_path="/var/log/rc.log"

# If you want verbose output for OpenRC, set this to yes. If you want
# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
#rc_verbose=no

# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"

# By default we assume that all daemons will start correctly.
# However, some do not - a classic example is that they fork and return 0 AND
# then child barfs on a configuration error. Or the daemon has a bug and the
# child crashes. You can set the number of milliseconds start-stop-daemon
# waits to check that the daemon is still running after starting here.
# The default is 0 - no checking.
#rc_start_wait=100

# rc_nostop is a list of services which will not stop when changing runlevels.
# This still allows the service itself to be stopped when called directly.
#rc_nostop=""

# rc will attempt to start crashed services by default.
# However, it will not stop them by default as that could bring down other
# critical services.
#rc_crashed_stop=NO
#rc_crashed_start=YES

# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
# output.
#rc_nocolor=NO

##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts

# Set unicode to YES to turn on unicode support for keyboards and screens.
#unicode="NO"

# This is how long fuser should wait for a remote server to respond. The
# default is 60 seconds, but  it can be adjusted here.
#rc_fuser_timeout=60

# Below is the default list of network fstypes.
#
# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# own fstypes to the following variable.
#extra_net_fs_list=""

##############################################################################
# SERVICE CONFIGURATION VARIABLES
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
# If your service has characters in its name which are not legal in
# shell variable names and you configure the variables for it in this
# file, those characters should be replaced with underscores in the
# variable names as shown below.

# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#SSD_NICELEVEL="-19"
# Or the ionice level. The format is class[:data] , just like the
# --ionice start-stop-daemon parameter.
#SSD_IONICELEVEL="2:2"

# Pass ulimit parameters
# If you are using bash in POSIX mode for your shell, note that the
# ulimit command uses a block size of 512 bytes for the -c and -f
# options
#rc_ulimit="-u 30"

# It's possible to define extra dependencies for services like so
#rc_config="/etc/foo"
#rc_need="openvpn"
#rc_use="net.eth0"
#rc_after="clock"
#rc_before="local"
#rc_provide="!net"

# You can also enable the above commands here for each service. Below is an
# example for service foo.
#rc_foo_config="/etc/foo"
#rc_foo_need="openvpn"
#rc_foo_after="clock"

# Below is an example for service foo-bar. Note that the '-' is illegal
# in a shell variable name, so we convert it to an underscore.
# example for service foo-bar.
#rc_foo_bar_config="/etc/foo-bar"
#rc_foo_bar_need="openvpn"
#rc_foo_bar_after="clock"

# You can also remove dependencies.
# This is mainly used for saying which services do NOT provide net.
#rc_net_tap0_provide="!net"

# Comment this line to disable dependency loop solver
rc_loopsolver_enable="YES"

# Comment this line to disable warnings about dependency loops
rc_loopsolver_warnings="YES"

# This is the subsystem type.
# It is used to match against keywords set by the keyword call in the
# depend function of service scripts.
#
# It should be set to the value representing the environment this file is
# PRESENTLY in, not the virtualization the environment is capable of.
# If it is commented out, automatic detection will be used.
#
# The list below shows all possible settings as well as the host
# operating systems where they can be used and autodetected.
#
# ""               - nothing special
# "docker"         - Docker container manager (Linux)
# "jail"           - Jail (DragonflyBSD or FreeBSD)
# "lxc"            - Linux Containers
# "openvz"         - Linux OpenVZ
# "prefix"         - Prefix
# "rkt"            - CoreOS container management system (Linux)
# "subhurd"        - Hurd subhurds (to be checked)
# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
# "uml"            - Usermode Linux
# "vserver"        - Linux vserver
# "xen0"           - Xen0 Domain (Linux and NetBSD)
# "xenU"           - XenU Domain (Linux and NetBSD)
#rc_sys=""

# on Linux and Hurd, this is the number of ttys allocated for logins
# It is used in the consolefont, keymaps, numlock and termencoding
# service scripts.
rc_tty_number=12

##############################################################################
# LINUX CGROUPS RESOURCE MANAGEMENT

# If you have cgroups turned on in your kernel, this switch controls
# whether or not a group for each controller is mounted under
# /sys/fs/cgroup.
# None of the other options in this section work if this is set to "NO".
#rc_controller_cgroups="YES"

# The following settings allow you to set up values for the cgroup
# controllers for your services.
# They can be set in this file;, however, if you do this, the settings
# will apply to all of your services.
# If you want different settings for each service, place the settings in
# /etc/conf.d/foo for service foo.
# The format is to specify the names of the settings followed by their
# values. Each variable can hold multiple settings.
# For example, you would use this to set the cpu.shares setting in the
# cpu controller to 512 for your service.
# rc_cgroup_cpu="
# cpu.shares 512
# "
#
#For more information about the adjustments that can be made with
#cgroups, see Documentation/cgroups/* in the linux kernel source tree.

# Set the blkio controller settings for this service.
#rc_cgroup_blkio=""

# Set the cpu controller settings for this service.
#rc_cgroup_cpu=""

# Add this service to the cpuacct controller (any value means yes).
#rc_cgroup_cpuacct=""

# Set the cpuset controller settings for this service.
#rc_cgroup_cpuset=""

# Set the devices controller settings for this service.
#rc_cgroup_devices=""

# Set the hugetlb controller settings for this service.
#rc_cgroup_hugetlb=""

# Set the memory controller settings for this service.
#rc_cgroup_memory=""

# Set the net_cls controller settings for this service.
#rc_cgroup_net_cls=""

# Set the net_prio controller settings for this service.
#rc_cgroup_net_prio=""

# Set the pids controller settings for this service.
#rc_cgroup_pids=""

# Set this to YES if you want all of the processes in a service's cgroup
# killed when the service is stopped or restarted.
# This should not be set globally because it kills all of the service's
# child processes, and most of the time this is undesirable. Please set
# it in /etc/conf.d/<service>.
# To perform this cleanup manually for a stopped service, you can
# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
# rc-service <service> cgroup_cleanup.
# rc_cgroup_cleanup="NO"

System specs.

System:    Host: devbang Kernel: 4.9.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.6.1
           Distro: Devuan GNU/Linux ascii/ceres
Machine:   Device: laptop System: TOSHIBA product: Satellite A660 v: PSAW3A-07S00R
           Mobo: TOSHIBA model: NWQAA v: 1.00 UEFI [Legacy]: TOSHIBA v: 2.30 date: 11/24/11
Battery    BAT1: charge: 45.0 Wh 100.0% condition: 45.0/45.0 Wh (100%)
CPU:       Quad core Intel Core i7 Q 740 (-HT-MCP-) speed/max: 933/1734 MHz
Graphics:  Card: NVIDIA GT216M [GeForce GT 330M]
           Display Server: X.Org 1.19.2 driver: N/A Resolution: 1366x768@60.00hz
           GLX Renderer: Gallium 0.4 on NVA5 GLX Version: 3.0 Mesa 13.0.6
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           Card-2: Broadcom Limited BCM4313 802.11bgn Wireless Network Adapter driver: bcma-pci-bridge
Drives:    HDD Total Size: 788.9GB (1.6% used)
Info:      Processes: 192 Uptime: 35 min Memory: 496.9/3886.3MB Client: Shell (bash) inxi: 2.3.5

Last edited by Panopticon (2018-04-01 00:57:55)

Offline

#2 2018-03-31 06:39:06

Panopticon
Member
Registered: 2018-01-27
Posts: 144  

Re: [solved] Ascii - OpenRC - Dependency messages

Ok so i thought i would try commenting out below lines in rc.conf, system still operating ok but presented with an error on boot.

# Comment this line to disable dependency loop solver
rc_loopsolver_enable="YES"

# Comment this line to disable warnings about dependency loops
rc_loopsolver_warnings="YES"

So now this happened:

* ERROR: cannot start mountall-bootclean.sh as checkroot-bootclean.sh would not start

Upon investigation that checkroot script cleans /tmp/ and /run/ when booting.

Its probably very trivial and not really worth worrying about but just thought i would post this up. I would like that script to work again but unsure how to proceed.

Last edited by Panopticon (2018-03-31 06:41:49)

Offline

#3 2018-03-31 21:32:06

fsmithred
Administrator
Registered: 2016-11-25
Posts: 927  

Re: [solved] Ascii - OpenRC - Dependency messages

I don't know what most of that output means, but probably reversing the changes you made should let that script work again - just uncomment those lines you commented.

Also (off-topic) unless you're sure you need it, I'd recommend removing live-tools. AFAIK, the only thing it does is get in the way of running update-initramfs.

Offline

#4 2018-04-01 00:57:23

Panopticon
Member
Registered: 2018-01-27
Posts: 144  

Re: [solved] Ascii - OpenRC - Dependency messages

Yes reversing the changes made the difference and so did uninstalling live-tools.

Is live-tools part of refractasnapshot-base or refractainstaller-base ?, because i downloaded those before these messages started appearing, maybe they dont play well with openrc. I did try once refractasnapshot to create a live iso of my system but when i tried booting it up on usb it got stuck at initramfs and as i am a novice was unsure how to proceed, but anyway that is going off topic, ill give another try with refractasnapshot another day. Ill mark this thread solved, cheers.

Offline

#5 2018-04-01 02:36:51

fsmithred
Administrator
Registered: 2016-11-25
Posts: 927  

Re: [solved] Ascii - OpenRC - Dependency messages

Refractasnapshot and installer depend on live-config, live-boot, live-boot-initramfs-tools and live-config-sysvinit. They do not require or use live-tools. Something pulled in that package, and at the moment, I can't recall what it is.

I've made snapshots with openrc in the past with TriOS and more recently with devuan ascii. It works. If you have trouble with it next time, start a new thread and we'll get it sorted..

Offline

Board footer