You are not logged in.
Again same happens, no devices after booting
When the devices are missing does thunar show any error messages when started from a terminal? How about the X.Org log?
no any errors if start Thunar from console
Xorg log https://pastebin.com/jnQ5STTp
Thanks. And why after that i have no network? May be DHCP not accepted from router?
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 intervalmany times at booting and no network after booting
syslog https://filebin.net/xlouztkn3ufvuos8
/etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcpPS how can i choose networking? from upper config file or NetworkManager?
/etc/resolv.conf
nameserver 192.168.0.1
nameserver 185.253.74.33
nameserver 185.253.74.34/etc/resolvconf.conf
resolvconf=NOThanks HoaS! And is there similar software(ready for use) but for Windows for pining battarey level charge on Asus, Acer, Dell laptops?
Aha! And how make this magic for saving life of battery?
archie:~$ cat /sys/class/power_supply/BAT0/cycle_count
59
archie:~$ cat /sys/class/power_supply/BAT0/energy_full_design
50450000
archie:~$ cat /sys/class/power_supply/BAT0/energy_full
50070000
archie:~$Its config, or script, wheris that settings?
steve_v
Thank you, kind man ![]()
Head_on_a_Stick wrote:If the laptop is kept plugged in with the battery at 100% that will degrade it over time
Indeed. The things that will kill li-ion cells the fastest are heat, repeated deep-discharges, and continuous trickle-charging... Two of which you will get in spades if you leave a machine plugged in with the EC set to maintain 100% charge.
If you intend to store a battery (functionally what an always-on-ac laptop is doing), you want it at 60-80% and as cool as possible.
This is uncomfortable, always watch to level of charging and always to plug on\off power cable.
Often this means it's better to remove the battery entirely if the machine allows it.
And what to do if laptop not allow remove battery, new laptops have build-in unmovable battery?
Why is there still no permanent connection mechanism to AC for laptops without harming the battery?
scrolling by pulling mouse + LMB pressed works only downways, not upways. is the behavior I get.
Thank you for information!)
steve_v
You need to load the .ccd file, not the .img. The .ccd contains the session and track information needed to determine the disk layout, without it you will get only the first (data) track, if anything.
Same with bin/cue format, you load the .cue file not the .bin.
Thanks! Now all seen!)
And why tracks starts from 2 not 1. First track is system meta data?
There are plenty of CD rippers. There are fewer drive emulators, because drive emulators are primarily used either for dealing with proprietary windows disk image formats or for piracy... Neither of which are a priority for free software.
CDemu works fine though, why do you need more than one virtual disk drive anyway?
May be. But where find this soft? On Windows all much easy. I now what software is better and what not. On Linux i cant know that.
I disagree. Finding the software needed to load those clonecd images was extremely easy, and I didn't even have to navigate the minefield of shitty websites, adware, crippleware, and malware I would have on windows.
Opposite here to me. I am on Windows since 1996. And Linux i am try since 2016 and its very hard to understand for me after Windows philosophy.
e.g. This cdemu its a red-eyed bloody mess for me. Compile and installing and run. Its all very difficult.
Only this instructions help to run cdemu daemon https://github.com/cdemu/cdemu/issues/1 … -500270189
ps and how to know that for mount needed all 3 files *.img, *.ccd, *.sub but mount needed only *.ccd?
At last
freeartist@devuan:/media/freeartist/a3291c87-c05e-4f36-a45a-b5f6b1dc98bd/home/deepforest/Downloads/Quake_II/dk.toastednet.org/music$ cdemu load 0 ground.zero.img
freeartist@devuan:/media/freeartist/a3291c87-c05e-4f36-a45a-b5f6b1dc98bd/home/deepforest/Downloads/Quake_II/dk.toastednet.org/music$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 186.3G 0 disk
├─sda1 8:1 0 10.5G 0 part
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 29.3G 0 part
├─sda6 8:6 0 48.8G 0 part
├─sda7 8:7 0 48.8G 0 part
└─sda8 8:8 0 48.8G 0 part
sdb 8:16 0 149.1G 0 disk
├─sdb1 8:17 0 70.3G 0 part
├─sdb2 8:18 0 4.5G 0 part
└─sdb3 8:19 0 74.2G 0 part
sdc 8:32 0 149G 0 disk
├─sdc1 8:33 0 70.3G 0 part /media/freeartist/a3291c87-c05e-4f36-a45a-b5f6b1dc98bd
├─sdc2 8:34 0 4G 0 part [SWAP]
└─sdc3 8:35 0 74.7G 0 part /
sr1 11:1 1 270.5M 0 rom /media/freeartist/GRNDZERO
freeartist@devuan:/media/freeartist/a3291c87-c05e-4f36-a45a-b5f6b1dc98bd/home/deepforest/Downloads/Quake_II/dk.toastednet.org/music$ no tracks
freeartist@devuan:/media/freeartist/a3291c87-c05e-4f36-a45a-b5f6b1dc98bd/home/deepforest/Downloads/Quake_II/dk.toastednet.org/music$ cdda2wav -B -D /dev/sr1
Type: ROM, Vendor 'CDEmu ' Model 'CD-ROM ' Revision '1.0 ' MMC+CDDA
569344 bytes buffer memory requested, 4 buffers, 55 sectors
#icedax version 1.1.11, real time sched., soundcard, libparanoia support
DATAtrack recorded copy-permitted tracktype
1- 1 uninterrupted no data
Table of Contents: total tracks:1, (total time 30:46.25)
1.[30:46.25]
Table of Contents: starting sectors
1.( 0), lead-out( 138475)
CDINDEX discid: EjtM..pg1DZvGsgUV956UdGuR78-
CDDB discid: 0x02073601
CD-Text: not detected
CD-Extra: not detected
This disk has no audio tracks
freeartist@devuan:/media/freeartist/a3291c87-c05e-4f36-a45a-b5f6b1dc98bd/home/deepforest/Downloads/Quake_II/dk.toastednet.org/music$ Thanks you very much for explanations!
And why Linux have very few CDemu and CDrippers software? On Linux its very hard to find software.
i.e. mount audio image with cdemu and rip music with asunder
freeartist@devuan:~/Downloads/ISO_tools/cdemu-daemon-3.2.6/build$ ./cdemu-daemon
Starting CDEmu daemon with following parameters:
- config file: (null) (exists: 0)
- num devices: 1
- control device: /dev/vhba_ctl
- audio driver: null
- bus type: session
- default CDEmu debug mask: 0x0
- default libMirage debug mask: 0x0
Using cross-namespace EXTERNAL authentication (this will deadlock if server is GDBus < 2.73.3)cdemu0: Kernel I/O: failed to open control device /dev/vhba_ctl: No such file or directory!
cdemu: Daemon: failed to start device #0!
cdemu: Daemon: failed to create device!
Daemon initialization and start failed!
freeartist@devuan:~/Downloads/ISO_tools/cdemu-daemon-3.2.6/build$ root@devuan:/home/freeartist/Downloads/ISO_tools/vhba-module-20211218# modprobe vbha
modprobe: FATAL: Module vbha not found in directory /lib/modules/6.0.0-4-amd64
root@devuan:/home/freeartist/Downloads/ISO_tools/vhba-module-20211218# root@devuan:/home/freeartist/Downloads/ISO_tools/libmirage-3.2.6/build# cdemu-daemon
Starting CDEmu daemon with following parameters:
- config file: (null) (exists: 0)
- num devices: 1
- control device: /dev/vhba_ctl
- audio driver: null
- bus type: session
- default CDEmu debug mask: 0x0
- default libMirage debug mask: 0x0
Using cross-namespace EXTERNAL authentication (this will deadlock if server is GDBus < 2.73.3)Using cross-namespace EXTERNAL authentication (this will deadlock if server is GDBus < 2.73.3)freeartist@devuan:~/Downloads/ISO_tools/cdemu-client-3.2.5$ cdemu add-device
ERROR: Failed to acquire daemon interface version (this most likely means your daemon is out-of-date): g-dbus-error-quark: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name net.sf.cdemu.CDEmuDaemon was not provided by any .service files (2)
freeartist@devuan:~/Downloads/ISO_tools/cdemu-client-3.2.5$ Thanks for reply.
Presumably you're talking about the Quake 2 nero / clonecd images hosted there?
Yes
The music will be in redbook (CD audio) format. How are you trying to extract it?
I am try convert ccd and nrg to iso and after extract. For convert i use iat, ccd2iso, poweriso. For extract i am mount as loop device converted iso but its been empty.
What about the MP3 files in the "ready to play" .rar?
I do not find it there.
Innoextract should work on the GOG package IIRC
Thanks for that its very helpful)
No, not solved, on xfce, mc scrolling by pulling mouse + RMB pressed working only downside, upside not.
Ok. Thanks.
You are frequent using notebook without power supply on battery?
All my our home laptops working from power supplies like stationary PC so i do not worry about their accumulators, i am wrong?
Thanks for reply!)
May be this answer?
Now tested. Under xfce all works good. Issue only under Trinity DE(KDE3 successor)
https://midnight-commander.org/ticket/4063
@deepforest . . . It's not about money. It's about principle. There is no excuse for theft, ever. The "wanting" is the problem that is the root of much suffering. Learn to let it go and be happy . . .
Agree. Its yet soviet philosophy here in heads. People were very poor and could not afford anything, so theft was welcomed, and this is one of the reasons for the collapse of the ussr.
Head_on_a_Stick
I am very sorry to hear of your misfortune, I hope things get better for you soon.
First main thing its - Hope for better its one thing to do now for all FreeWorld.
Second main thing its - supporting of FreeWorld to Ukraine in fighting against demons of mordor.
Because I prefer to use the same operating system as all of the world's top 500 most powerful computers.
You mean SuperComuters? But SuperComuters using Linux not for Desktop but computing only?
And anyway you don't have to buy Windows at all — just download one of the official ISO images and install using that without adding a key when prompted (just select "add later"). All Windows will do is display an "Activate Windows" watermark on the desktop, remove the ability to change wallpapers after the first few days, and keep nagging you to add an activation key. The operating system will continue to update itself and stay functional in all other respects indefinitely even if you don't pay. It's just nagware these days.
You talking about 10 and 11? Because XP and 7 is blocked after while if licensed key do not entered.
Thanks to All!
But i am curious, what technically wrong with music images? Under my Windows 7 i am mounted music images and it same looks empty. May be they broken?
steve_v
Innoextract works on the GOG windows installer, as I mentioned in the other thread.
Should be as easy as 'innoextract setup_quake2_quad_damage_2.0.0.3.exe', grab the extracted "app" directory, drop in yamagi binaries and play.
Thanks for useful info!
I just extracted the GOG "Quake II Quad Damage" installer, and there are 19 tracks included as .ogg.
This is 19tracks all OSTs not only from original Q2 but rouge and xatrix addons music here?
gog and steam versions have only windows setup versions how i get resources?
this old classics, more than 20 years have passed, it's already in the public domain ![]()
piracy - its also freedom like linux! ![]()
here in Ukraine now we have not Europeans income, so we cant buy proprietary software and we use pirated warez ![]()
ps if you so rich why you using amator linux and do not buy licenced Windows?
noone use that here?
were function files scrolling by dragging mouse.
now i use mc 4.8.28 and this function not working, why?
Cant extract music from that images. Its empty but have volume. Game images extracted good. Please help.
http://dk.toastednet.org/FPS_Legends/quake2.html
http://dk.toastednet.org/FPS_Legends/
Cant extract music from that images. Game images extracted good. Please help.
http://dk.toastednet.org/FPS_Legends/
>Install it just as you would any other Q2 mod.
on Windows i just copy mod folder to Q2 folder and launch - quake2.exe +set game modname And how do similar on Linux?
And what base Quake2 game are you using? Native linux or Wine or standalone Q2 engine?
How to setup it on Linux? You play online or with bots?