Dev1 Galaxy Forum / Installing from USB thumb drive

Re: Installing from USB thumb drive

dummy@example.com (delgado) — Sun, 11 Dec 2022 14:44:26 +0000

Devarch wrote:

Download unofficial non-free image of Debian and convert it installed to Devuan.

Can't confirm that. The modprobe -i nvidia-current error in /var/log/dmesg is present in both cases, migration with installed nvidia drivers and devuan installation.

But, does it do something at all?
lsmod says nvidia modules are loaded, I' just ignoring it.

Re: Installing from USB thumb drive

dummy@example.com (Devarch) — Sat, 10 Dec 2022 23:48:35 +0000

Micronaut wrote:

Has the odd problem of permanently incomplete install of proprietary video drivers been solved in chimaera? Or will I have to go back to those threads about elaborate extra steps to complete the installation?

Download unofficial non-free image of Debian and convert it installed to Devuan. There is always a choise.

Re: Installing from USB thumb drive

dummy@example.com (Micronaut) — Sat, 10 Dec 2022 21:07:43 +0000

Nope, same old same old. Every time the system boots, I get the error:

[ 0.862162] udevd[118]: Error running install command 'modprobe -i nvidia-current ' for module nvidia: retcode 1

Looks like the nVidia drivers just cannot be properly installed in Devuan. But the system does run, so at least it's a minor error, not a system ruining disaster.

Re: Installing from USB thumb drive

dummy@example.com (GlennW) — Tue, 29 Nov 2022 03:02:25 +0000

I'm sure you know how to get rid of the unwanted packages, ... I know it's tedius but worth the effort.

at boot I go the recovery route, and edit the "linux" line to say... (check for conflicts)

vga=794 modeset.nouveau=0

The main trick is to have all the dependants installed, edit the module blacklist and boot the machine without the nouveau module loading before the install.

Re: Installing from USB thumb drive

dummy@example.com (Head_on_a_Stick) — Mon, 28 Nov 2022 17:49:30 +0000

Well you should have been more specific then

Did you try the fix given at the end of the thread? Doesn't seem very "elaborate" to me... EDIT: drama queen.

Re: Installing from USB thumb drive

dummy@example.com (Micronaut) — Mon, 28 Nov 2022 17:31:01 +0000

You misunderstand what I am referring to. I am not complaining about the 'no non-free software by default' policy, I am referring to a permanent bug in the install of said software if you choose to do so. viz.

https://dev1galaxy.org/viewtopic.php?id=4802

Re: Installing from USB thumb drive

dummy@example.com (Head_on_a_Stick) — Mon, 28 Nov 2022 16:45:35 +0000

Micronaut wrote:

Has the odd problem of permanently incomplete install of proprietary video drivers been solved in chimaera?

Debian is over 20 years old now and has never, in all that time, included any proprietary video drivers in an official release. What makes you think that will change any time soon? And why do you describe it as "odd"? Supplying proprietary drivers is expressly forbidden by Debian's Social Contract.

Re: Installing from USB thumb drive

dummy@example.com (Micronaut) — Mon, 28 Nov 2022 16:27:44 +0000

OK, I finally decided not to let myself be 'too busy' and actually try again. The install works flawlessly from a plastic disk. Same ISO. So why could it not do its job from a USB? Odd.

It was late at night when I did this, so I didn't do all my usual customizations yet. Now I'm preparing to do all the customization, such as installing the nVidia drivers. Has the odd problem of permanently incomplete install of proprietary video drivers been solved in chimaera? Or will I have to go back to those threads about elaborate extra steps to complete the installation?

Re: Installing from USB thumb drive

dummy@example.com (Micronaut) — Wed, 05 Oct 2022 01:54:42 +0000

I've burned a DVD but haven't had the time to try again yet. It's gonna need a couple hours (at least) to install the OS and then all the little tweaks that I like in any distro. Probably this weekend I'll try again. If it still doesn't work I'm gonna be very annoyed.

But that 'ventoy' utility looks very interesting. Gonna have to try that out.

Re: Installing from USB thumb drive

dummy@example.com (Devarch) — Mon, 03 Oct 2022 17:49:04 +0000

https://www.ventoy.net/en/index.html
Probably this is the best solution for installation media. One need to create ventoy flash drive only once. Just copy iso file to that drive (or as many iso as possible) and boot from flash drive.

Re: Installing from USB thumb drive

dummy@example.com (Camtaf) — Mon, 03 Oct 2022 16:38:34 +0000

ralph.ronnquist wrote:

I think @Camtaf is talking about desktop-live, which is a different alternative that many people prefer.

Yes, sorry, both 'live' versions have been updated, & I assumed that the 'desktop' would have been too, 'my bad', as some say.

Re: Installing from USB thumb drive

dummy@example.com (fsmithred) — Mon, 03 Oct 2022 13:39:36 +0000

If you don't want to re-make the usb with dd or cat, you might get around the problem with some creative symlinking to /cdrom. I've done it in the past, but it's been a few years. Try linking the usb mountpoint or a relevant directory on the usb to /cdrom.

Re: Installing from USB thumb drive

dummy@example.com (ralph.ronnquist) — Mon, 03 Oct 2022 09:51:25 +0000

No, the installer-iso is still version devuan_chimaera_4.0.0_amd64_desktop.iso.

I think @Camtaf is talking about desktop-live, which is a different alternative that many people prefer.

Re: Installing from USB thumb drive

dummy@example.com (Camtaf) — Mon, 03 Oct 2022 09:11:49 +0000

Latest version is 4.0.2 - try that.

Re: Installing from USB thumb drive

dummy@example.com (ralph.ronnquist) — Mon, 03 Oct 2022 01:18:27 +0000

Perhaps you can capture /var/log/syslog from the installer and show here.

For instance use ctrl-alt-f2 to enter a shell at vt2, then set up a receiver

nc -l -p 10000 > capture.log

on another machine, say 10.0.0.5, and copy over with

nc -w 2 10.0.0.5 10000 < /var/log/syslog

from the installer shell to the receiver on that other machine.

The ISO is a s.c hybrid ISO that presents itself both as a CDROM and as a disk image with 2 partitions where the first is a CDROM and the second is a FAT filesystem (for UEFI boot). The partition block ranges overlap of course, as the FAT filesystem is in fact an image file within the CDROM, but the bios is not clever enough to worry about that.

In any case, the log file should give some lead to why the installer cannot find the CDROM.