<![CDATA[Dev1 Galaxy Forum / [Solved][Raspberry Pi 2] Serial console]]> https://dev1galaxy.org/viewtopic.php?id=4774 Wed, 05 Jan 2022 17:35:17 +0000 FluxBB <![CDATA[Re: [Solved][Raspberry Pi 2] Serial console]]> https://dev1galaxy.org/viewtopic.php?pid=33702#p33702 Thanks for the tip!

]]> Wed, 05 Jan 2022 17:35:17 +0000 https://dev1galaxy.org/viewtopic.php?pid=33702#p33702 <![CDATA[[Solved][Raspberry Pi 2] Serial console]]> https://dev1galaxy.org/viewtopic.php?pid=33693#p33693 Hi!

Thanks for the nice work. I'm using

devuan_chimaera_4.0.0_armhf_rpi2.img.zip

After I wrote the image to the SD card I had problems using the serial console (namely, there were some boot output, but no login prompt).

So I modified cmdline.txt and /etc/inittab as follows:

config.txt

enable_uart=1

cmdline.txt

dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=PARTUUID=a403f26f-02 rootfstype=ext4 fsck.repair=yes logo.nologo net.ifnames=0 firmware_class.path=/lib/firmware/updates/brcm rootwait

/etc/inittab

T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100

Maybe only inittab modification was required, but I'm posting the cmdline.txt changes anyway.

Good luck!

]]> Tue, 04 Jan 2022 21:03:27 +0000 https://dev1galaxy.org/viewtopic.php?pid=33693#p33693