/etc/dbus-1/system.d/pulseaudio-system.conf

rm -rf ~/.asoundrc
sudo rm -rf /etc/pulse/*

# Make it possible for ALSA forward to pulseaudio.
# Based on idea from
# http://alsa.opensrc.org/index.php/Default_device_from_environment_variable
# A related note is in
# http://wiki.archlinux.org/index.php/Pulseaudio#KDE_4
#
# See also
# http://wiki.archlinux.org/index.php/Allowing_Multiple_Programs_to_Play_Sound
# and <URL: http://bugs.debian.org/604728 >.

pcm.!default {
        type plug
        slave.pcm "dmixer"
}

pcm.dmixer  {
        type dmix
        ipc_key 1024
        slave {
                pcm "hw:1,0"
                period_time 0
                period_size 1024
                buffer_size 4096
                rate 44100
        }
        bindings {
                0 0
                1 1
        }
}

ctl.dmixer {
        type hw
        card 0
}

ctl.!default {
    type pulse
}

pcm.pulse { type pulse }
ctl.pulse { type pulse }

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; default-sink =
; default-source =
; default-server =
; default-dbus-server =

  autospawn = yes
; allow-autospawn-for-root = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog

; cookie-file =

; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB

; auto-connect-localhost = no
; auto-connect-display = no

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0

  flat-volumes = no

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
  default-sample-rate = 44100
  alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right

  default-fragments = 8
  default-fragment-size-msec = 25

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started in system
# mode.

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Enable positioned event sounds
load-module module-position-event-sounds

mkdir -p /etc/dbus-1/system.d

<?xml version="1.0"?><!--*-nxml-*-->
<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">

<!--
This file is part of PulseAudio.

PulseAudio is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as
published by the Free Software Foundation; either version 2.1 of the
License, or (at your option) any later version.

PulseAudio is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.

You should have received a copy of the GNU Lesser General Public
License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-->

<busconfig>

  <!-- System-wide PulseAudio runs as 'pulse' user. This fragment is
       not necessary for user PulseAudio instances. -->

  <policy user="pulse">
    <allow own="org.pulseaudio.Server"/>
  </policy>

</busconfig>

sudo apt-get purge -y paprefs pulseaudio-module-raop pulseaudio-module-zeroconf libcanberra-pulse* pulseaudio* pulseaudio-esound-compat* pulseaudio-module-gconf* pulseaudio-module-jack*

sudo rm -rf /tmp/pulse-* /etc/pulse ~/.esd_auth ~/.config/pulse /etc/asound.conf

sudo apt-get update ; sudo apt-get install -y libpulse-dev libpulse-mainloop-glib0 libpulse0 libpulse0:i386 libpulsedsp pulseaudio pulseaudio-equalizer pulseaudio-utils pavucontrol paman pavumeter pasystray

gconftool-2 -t string --set /system/gstreamer/0.10/default/audiosink pulsesink
gconftool-2 -t string --set /system/gstreamer/0.10/default/audiosrc pulsesrc
gconftool-2 -t string --set /system/gstreamer/0.10/default/musicaudiosink pulsesink

alias snd-card-0 snd_ens1371
alias sound-slot-0 snd_ens1371
alias snd-card-1 snd-aloop
alias snd-card-2 snd-hdsp
options snd-aloop index=1 pcm_substreams=2
options snd_ens1371 model=3stack-6ch
options snd_ens1371 enable_msi=1
options snd_ens1371 index=0
options snd-pcsp index=-2
options snd-hdsp index=2

# OpenAL config file.
#
# Option blocks may appear multiple times, and duplicated options will take the
# last value specified. Environment variables may be specified within option
# values, and are automatically substituted when the config file is loaded.
# Environment variable names may only contain alpha-numeric characters (a-z,
# A-Z, 0-9) and underscores (_), and are prefixed with $. For example,
# specifying "$HOME/file.ext" would typically result in something like
# "/home/user/file.ext". To specify an actual "$" character, use "$$".
#
# Device-specific values may be specified by including the device name in the
# block name, with "general" replaced by the device name. That is, general
# options for the device "Name of Device" would be in the [Name of Device]
# block, while ALSA options would be in the [alsa/Name of Device] block.
# Options marked as "(global)" are not influenced by the device.
#
# The system-wide settings can be put in /etc/openal/alsoft.conf and user-
# specific override settings in $HOME/.alsoftrc.
# For Windows, these settings should go into $AppData\alsoft.ini
#
# Option and block names are case-senstive. The supplied values are only hints
# and may not be honored (though generally it'll try to get as close as
# possible). Note: options that are left unset may default to app- or system-
# specified values. These are the current available settings:

##
## General stuff
##
[general]

## disable-cpu-exts: (global)
#  Disables use of specialized methods that use specific CPU intrinsics.
#  Certain methods may utilize CPU extensions for improved performance, and
#  this option is useful for preventing some or all of those methods from being
#  used. The available extensions are: sse, sse2, sse3, sse4.1, and neon.
#  Specifying 'all' disables use of all such specialized methods.
#disable-cpu-exts =

## drivers: (global)
#  Sets the backend driver list order, comma-seperated. Unknown backends and
#  duplicated names are ignored. Unlisted backends won't be considered for use
#  unless the list is ended with a comma (e.g. 'oss,' will try OSS first before
#  other backends, while 'oss' will try OSS only). Backends prepended with -
#  won't be considered for use (e.g. '-oss,' will try all available backends
#  except OSS). An empty list means to try all backends.
#drivers =
drivers=pulse,alsa

## channels:
#  Sets the output channel configuration. If left unspecified, one will try to
#  be detected from the system, and defaulting to stereo. The available values
#  are: mono, stereo, quad, surround51, surround51rear, surround61, surround71
#channels =

## sample-type:
#  Sets the output sample type. Currently, all mixing is done with 32-bit float
#  and converted to the output sample type as needed. Available values are:
#  int8    - signed 8-bit int
#  uint8   - unsigned 8-bit int
#  int16   - signed 16-bit int
#  uint16  - unsigned 16-bit int
#  int32   - signed 32-bit int
#  uint32  - unsigned 32-bit int
#  float32 - 32-bit float
#sample-type = float32

## frequency:
#  Sets the output frequency. If left unspecified it will try to detect a
#  default from the system, otherwise it will default to 44100.
#frequency =

## period_size:
#  Sets the update period size, in frames. This is the number of frames needed
#  for each mixing update. Acceptable values range between 64 and 8192.
#period_size = 1024

## periods:
#  Sets the number of update periods. Higher values create a larger mix ahead,
#  which helps protect against skips when the CPU is under load, but increases
#  the delay between a sound getting mixed and being heard. Acceptable values
#  range between 2 and 16.
#periods = 4

## stereo-mode:
#  Specifies if stereo output is treated as being headphones or speakers. With
#  headphones, HRTF or crossfeed filters may be used for better audio quality.
#  Valid settings are auto, speakers, and headphones.
#stereo-mode = auto

## hrtf:
#  Controls HRTF processing. These filters provide better spatialization of
#  sounds while using headphones, but do require a bit more CPU power. The
#  default filters will only work with 44100hz or 48000hz stereo output. While
#  HRTF is used, the cf_level option is ignored. Setting this to auto (default)
#  will allow HRTF to be used when headphones are detected or the app requests
#  it, while setting true or false will forcefully enable or disable HRTF
#  respectively.
#hrtf = auto

## hrtf_tables:
#  Specifies a comma-separated list of files containing HRTF data sets. The
#  format of the files are described in hrtf.txt. The filenames may contain
#  these markers, which will be replaced as needed:
#  %r - Device sampling rate
#  %s - Non-greedy string (up to the following matching characters)
#  %% - Percent sign (%)
#  The listed files are relative to system-dependant data directories. On
#  Windows this is:
#  $AppData\openal\hrtf
#  And on other systems, it's (in order):
#  $XDG_DATA_HOME/openal/hrtf  (defaults to $HOME/.local/share/openal/hrtf)
#  $XDG_DATA_DIRS/openal/hrtf  (defaults to /usr/local/share/openal/hrtf and
#                               /usr/share/openal/hrtf)
#  An absolute path may also be specified, if the given file is elsewhere.
#hrtf_tables = %s.mhr

## cf_level:
#  Sets the crossfeed level for stereo output. Valid values are:
#  0 - No crossfeed
#  1 - Low crossfeed
#  2 - Middle crossfeed
#  3 - High crossfeed (virtual speakers are closer to itself)
#  4 - Low easy crossfeed
#  5 - Middle easy crossfeed
#  6 - High easy crossfeed
#  Users of headphones may want to try various settings. Has no effect on non-
#  stereo modes.
#cf_level = 0

## resampler: (global)
#  Selects the resampler used when mixing sources. Valid values are:
#  point - nearest sample, no interpolation
#  linear - extrapolates samples using a linear slope between samples
#  sinc4 - extrapolates samples using a 4-point Sinc filter
#  sinc8 - extrapolates samples using an 8-point Sinc filter
#  bsinc - extrapolates samples using a band-limited Sinc filter (varying
#          between 12 and 24 points, with anti-aliasing)
#  Specifying other values will result in using the default (linear).
#resampler = linear

## rt-prio: (global)
#  Sets real-time priority for the mixing thread. Not all drivers may use this
#  (eg. PortAudio) as they already control the priority of the mixing thread.
#  0 and negative values will disable it. Note that this may constitute a
#  security risk since a real-time priority thread can indefinitely block
#  normal-priority threads if it fails to wait. As such, the default is
#  disabled.
#rt-prio = 0

## sources:
#  Sets the maximum number of allocatable sources. Lower values may help for
#  systems with apps that try to play more sounds than the CPU can handle.
#sources = 256

## slots:
#  Sets the maximum number of Auxiliary Effect Slots an app can create. A slot
#  can use a non-negligible amount of CPU time if an effect is set on it even
#  if no sources are feeding it, so this may help when apps use more than the
#  system can handle.
#slots = 4

## sends:
#  Sets the number of auxiliary sends per source. When not specified (default),
#  it allows the app to request how many it wants. The maximum value currently
#  possible is 4.
#sends =

## excludefx: (global)
#  Sets which effects to exclude, preventing apps from using them. This can
#  help for apps that try to use effects which are too CPU intensive for the
#  system to handle. Available effects are: eaxreverb,reverb,chorus,compressor,
#  distortion,echo,equalizer,flanger,modulator,dedicated
#excludefx =

## default-reverb: (global)
#  A reverb preset that applies by default to all sources on send 0
#  (applications that set their own slots on send 0 will override this).
#  Available presets are: None, Generic, PaddedCell, Room, Bathroom,
#  Livingroom, Stoneroom, Auditorium, ConcertHall, Cave, Arena, Hangar,
#  CarpetedHallway, Hallway, StoneCorridor, Alley, Forest, City, Moutains,
#  Quarry, Plain, ParkingLot, SewerPipe, Underwater, Drugged, Dizzy, Psychotic.
#default-reverb =

## trap-alc-error: (global)
#  Generates a SIGTRAP signal when an ALC device error is generated, on systems
#  that support it. This helps when debugging, while trying to find the cause
#  of a device error. On Windows, a breakpoint exception is generated.
#trap-alc-error = false

## trap-al-error: (global)
#  Generates a SIGTRAP signal when an AL context error is generated, on systems
#  that support it. This helps when debugging, while trying to find the cause
#  of a context error. On Windows, a breakpoint exception is generated.
#trap-al-error = false

##
## Reverb effect stuff (includes EAX reverb)
##
[reverb]

## boost: (global)
#  A global amplification for reverb output, expressed in decibels. The value
#  is logarithmic, so +6 will be a scale of (approximately) 2x, +12 will be a
#  scale of 4x, etc. Similarly, -6 will be about half, and -12 about 1/4th. A
#  value of 0 means no change.
#boost = 0

## emulate-eax: (global)
#  Allows the standard reverb effect to be used in place of EAX reverb. EAX
#  reverb processing is a bit more CPU intensive than standard, so this option
#  allows a simpler effect to be used at the loss of some quality.
#emulate-eax = false

##
## PulseAudio backend stuff
##
[pulse]

## spawn-server: (global)
#  Attempts to autospawn a PulseAudio server whenever needed (initializing the
#  backend, enumerating devices, etc). Setting autospawn to false in Pulse's
#  client.conf will still prevent autospawning even if this is set to true.
#spawn-server = true

## allow-moves: (global)
#  Allows PulseAudio to move active streams to different devices. Note that the
#  device specifier (seen by applications) will not be updated when this
#  occurs, and neither will the AL device configuration (sample rate, format,
#  etc).
#allow-moves = false

## fix-rate:
#  Specifies whether to match the playback stream's sample rate to the device's
#  sample rate. Enabling this forces OpenAL Soft to mix sources and effects
#  directly to the actual output rate, avoiding a second resample pass by the
#  PulseAudio server.
#fix-rate = false

##
## ALSA backend stuff
##
[alsa]

## device: (global)
#  Sets the device name for the default playback device.
#device = default

## device-prefix: (global)
#  Sets the prefix used by the discovered (non-default) playback devices. This
#  will be appended with "CARD=c,DEV=d", where c is the card id and d is the
#  device index for the requested device name.
#device-prefix = plughw:

## device-prefix-*: (global)
#  Card- and device-specific prefixes may be used to override the device-prefix
#  option. The option may specify the card id (eg, device-prefix-NVidia), or
#  the card id and device index (eg, device-prefix-NVidia-0). The card id is
#  case-sensitive.
#device-prefix- =

## capture: (global)
#  Sets the device name for the default capture device.
#capture = default

## capture-prefix: (global)
#  Sets the prefix used by the discovered (non-default) capture devices. This
#  will be appended with "CARD=c,DEV=d", where c is the card id and d is the
#  device number for the requested device name.
#capture-prefix = plughw:

## capture-prefix-*: (global)
#  Card- and device-specific prefixes may be used to override the
#  capture-prefix option. The option may specify the card id (eg,
#  capture-prefix-NVidia), or the card id and device index (eg,
#  capture-prefix-NVidia-0). The card id is case-sensitive.
#capture-prefix- =

## mmap:
#  Sets whether to try using mmap mode (helps reduce latencies and CPU
#  consumption). If mmap isn't available, it will automatically fall back to
#  non-mmap mode. True, yes, on, and non-0 values will attempt to use mmap. 0
#  and anything else will force mmap off.
#mmap = true

## allow-resampler:
#  Specifies whether to allow ALSA's built-in resampler. Enabling this will
#  allow the playback device to be set to a different sample rate than the
#  actual output, causing ALSA to apply its own resampling pass after OpenAL
#  Soft resamples and mixes the sources and effects for output.
#allow-resampler = false

##
## OSS backend stuff
##
[oss]

## device: (global)
#  Sets the device name for OSS output.
#device = /dev/dsp

## capture: (global)
#  Sets the device name for OSS capture.
#capture = /dev/dsp

##
## Solaris backend stuff
##
[solaris]

## device: (global)
#  Sets the device name for Solaris output.
#device = /dev/audio

##
## QSA backend stuff
##
[qsa]

##
## JACK backend stuff
##
[jack]

## spawn-server: (global)
#  Attempts to autospawn a JACK server whenever needed (initializing the
#  backend, opening devices, etc).
#spawn-server = false

## buffer-size:
#  Sets the update buffer size, in samples, that the backend will keep buffered
#  to handle the server's real-time processing requests. This value must be a
#  power of 2, or else it will be rounded up to the next power of 2. If it is
#  less than JACK's buffer update size, it will be clamped. This option may
#  be useful in case the server's update size is too small and doesn't give the
#  mixer time to keep enough audio available for the processing requests.
#buffer-size = 0

##
## MMDevApi backend stuff
##
[mmdevapi]

##
## DirectSound backend stuff
##
[dsound]

##
## Windows Multimedia backend stuff
##
[winmm]

##
## PortAudio backend stuff
##
[port]

## device: (global)
#  Sets the device index for output. Negative values will use the default as
#  given by PortAudio itself.
#device = -1

## capture: (global)
#  Sets the device index for capture. Negative values will use the default as
#  given by PortAudio itself.
#capture = -1

##
## Wave File Writer stuff
##
[wave]

## file: (global)
#  Sets the filename of the wave file to write to. An empty name prevents the
#  backend from opening, even when explicitly requested.
#  THIS WILL OVERWRITE EXISTING FILES WITHOUT QUESTION!
#file =

## bformat: (global)
#  Creates AMB format files using first-order ambisonics instead of a standard
#  single- or multi-channel .wav file.
#bformat = false

default_driver=pulse,alsa
quiet

# /etc/hosts.allow: list of hosts that are allowed to access the system.
#                   See the manual pages hosts_access(5) and hosts_options(5).
#
# Example:    ALL: LOCAL @some_netgroup
#             ALL: .foobar.edu EXCEPT terminalserver.foobar.edu
#
# If you're going to protect the portmapper use the name "rpcbind" for the
# daemon name. See rpcbind(8) and rpc.mountd(8) for further information.
#
pulseaudio-native: ALL

# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out.  Use either ; or # for
## commenting.

; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no

; high-priority = yes
; nice-level = -11

; realtime-scheduling = yes
; realtime-priority = 5

; exit-idle-time = 20
; scache-idle-time = 20

; dl-search-path = (depends on architecture)

; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa

; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0

; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0

 flat-volumes = no

; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000

; default-sample-format = s16le
 default-sample-rate = 48000
 alternate-sample-rate = 44100
; default-sample-channels = 2
; default-channel-map = front-left,front-right

 default-fragments = 8
 default-fragment-size-msec = 5

; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0

#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect tsched=0
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

### Make some devices default
#set-default-sink output
#set-default-source input

load-module module-alsa-sink device=dmix
load-module module-alsa-source device=dsnoop

pcm.pulse {
    type pulse
}
ctl.pulse {
    type pulse
}
pcm.!default {
    type pulse
}
ctl.!default {
    type pulse
}
 
# Diviendo el sonido hacia las 4 Cornetas :
pcm.dshare {
    type dmix
    ipc_key 2048
    slave {
        pcm "hw:0"
        rate 44100
        period_time 0
        period_size 1024
        buffer_size 8192
        channels 4
    }
    bindings {
        0 0
        1 1
        2 2
        3 3
    }
}
pcm.frontx {
    type plug
    slave {
        pcm "dshare"
        channels 4
    }
    ttable.0.0 1
    ttable.1.1 1
}
pcm.rearx {
    type plug
    slave {
        pcm "dshare"
        channels 4
    }
    ttable.0.2 1
    ttable.1.3 1
}

fuser -v /dev/snd/*

                     USER        PID ACCESS COMMAND
/dev/snd/pcmC0D0p:   inukaze   27390 F...m pnmixer
/dev/snd/seq:        inukaze   27601 f.... fluidsynth

killall -9 pnmixer fluidsynth pulseaudio
rm -rf ~/.pulse*
sudo rm -rf /tmp/pulse*

sudo service avahi-daemon restart
pax11publish
start-pulseaudio-x11

sudo nano /etc/pulse/default.pa

#Inukaze :
load-module module-alsa-sink device=dmix
load-module module-alsa-source device=dsnoop

sudo nano /etc/modprobe.d/sound.conf

options snd-pcsp index=-2
alias snd-card-0 snd_ens1371
alias sound-slot-0 snd_ens1371
options snd_ens1371 model=3stack-6ch
options snd_ens1371 enable_msi=1

sudo rm -rf /etc/asound.conf $HOME/.asoundrc
sudo nano $HOME/.asoundrc

pcm.pulse {
    type pulse
}
ctl.pulse {
    type pulse
}
pcm.!default {
    type pulse
}
ctl.!default {
    type pulse
}
 
# Diviendo el sonido hacia las 4 Cornetas :
pcm.dshare {
    type dmix
    ipc_key 2048
    slave {
        pcm "hw:0"
        rate 44100
        period_time 0
        period_size 1024
        buffer_size 8192
        channels 4
    }
    bindings {
        0 0
        1 1
        2 2
        3 3
    }
}
pcm.frontx {
    type plug
    slave {
        pcm "dshare"
        channels 4
    }
    ttable.0.0 1
    ttable.1.1 1
}
pcm.rearx {
    type plug
    slave {
        pcm "dshare"
        channels 4
    }
    ttable.0.2 1
    ttable.1.3 1
}

pax11publish
pulseaudio -D

pacmd list-cards
0 card(s) available.

pacmd list-sinks
1 sink(s) available.
  * index: 1
	name: <alsa_output.dmix>
	driver: <module-alsa-sink.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9050
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 1
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 341,33 ms
	module: 24
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ES1371 DAC2/ADC"
		alsa.id = "ES1371/1"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "Ensoniq AudioPCI"
		alsa.long_card_name = "Ensoniq AudioPCI ENS1371 at 0xdc00, irq 19"
		alsa.driver_name = "snd_ens1371"
		device.bus_path = "pci-0000:01:06.0"
		sysfs.path = "/devices/pci0000:00/0000:00:04.0/0000:01:06.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1274"
		device.vendor.name = "Ensoniq"
		device.product.id = "1371"
		device.product.name = "ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI])"
		device.string = "dmix"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "4096"
		device.access_mode = "mmap+timer"
		device.description = "ES1371/ES1373 / Creative Labs CT2518 (Audio PCI 64V/128/5200 / Creative CT4810/CT5803/CT5806 [Sound Blaster PCI])"
		device.icon_name = "audio-card-pci"

pacmd list-sink-inputs
0 sink input(s) available.

pulseaudio --kill ; pulseaudio
E: [pulseaudio] socket-server.c: socket(PF_INET6): Esta familia de direcciones no está soportada por el protocolo

E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-esound-protocol-tcp.so: module-esound-protocol-tcp.so: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio

E: [pulseaudio] module.c: Failed to open module "module-esound-protocol-tcp".

E: [pulseaudio] module-gconf.c: pa_module_load() failed

E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-raop-discover.so: module-raop-discover.so: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio

E: [pulseaudio] module.c: Failed to open module "module-raop-discover".

E: [pulseaudio] module-gconf.c: pa_module_load() failed

E: [avahi-ml] module-zeroconf-publish.c: Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.hostname1 was not provided by any .service files

load-module module-udev-detect

load-module module-udev-detect tsched=0

$ killall -9 pulseaudio
$ start-pulseaudio-x11

$ sudo gpasswd -a $USER audio

sudo apt-get purge -y paprefs pulseaudio-module-raop pulseaudio-module-zeroconf libcanberra-pulse* pulseaudio* pulseaudio-esound-compat* pulseaudio-module-gconf* pulseaudio-module-jack*

sudo rm -r /tmp/pulse-* /etc/pulse/client.conf ~/.esd_auth ~/.config/pulse

$ start-pulseaudio-x11 
Error en la conexión: Conexión negada
pa_context_connect() falló: Conexión negada

$ pulseaudio 
E: [pulseaudio] socket-server.c: bind(): La dirección ya se está usando
E: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Fallo al intentar iniciar el demonio.

$ sudo nano /etc/pulse/default.pa #Commented the line -> load-module module-esound-protocol-unix

$ pulseaudio 
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-zeroconf-publish.so: module-zeroconf-publish.so: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
E: [pulseaudio] module.c: Failed to open module "module-zeroconf-publish".
E: [pulseaudio] module-gconf.c: pa_module_load() failed
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-zeroconf-discover.so: module-zeroconf-discover.so: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
E: [pulseaudio] module.c: Failed to open module "module-zeroconf-discover".
E: [pulseaudio] module-gconf.c: pa_module_load() failed
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-raop-discover.so: module-raop-discover.so: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
E: [pulseaudio] module.c: Failed to open module "module-raop-discover".
E: [pulseaudio] module-gconf.c: pa_module_load() failed
E: [pulseaudio] main.c: D-Bus name org.PulseAudio1 already taken.

$ sudo apt-get install -y pulseaudio-module-raop

$ pulseaudio 
E: [avahi-ml] module-zeroconf-publish.c: Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.hostname1 was not provided by any .service files
E: [pulseaudio] main.c: D-Bus name org.PulseAudio1 already taken.

$ sudo service avahi-daemon stop
[ ok ] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.

$ pulseaudio 
E: [pulseaudio] main.c: D-Bus name org.PulseAudio1 already taken.

$ pulseaudio -vvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operación no permitida
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 10.0
D: [pulseaudio] main.c: Compilation host: x86_64-pc-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -g -O2 -fdebug-prefix-map=/build/pulseaudio-ZMrhzG/pulseaudio-10.0=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wextra -pipe -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux x86_64 4.9.0-8-amd64 #1 SMP Debian 4.9.144-3 (2019-02-02)
D: [pulseaudio] main.c: Found 2 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 7ed0846550a954a18024d71d5a738d95.
I: [pulseaudio] main.c: Using runtime directory /home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-runtime.
I: [pulseaudio] main.c: Using state directory /home/inukaze/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-10.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: System supports high resolution timers
D: [pulseaudio] memblock.c: Using shared memfd memory pool with 1024 slots of size 64,0 KiB each, total size is 64,0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 MMXEXT 3DNOW 3DNOWEXT 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/inukaze/.config/pulse/7ed0846550a954a18024d71d5a738d95-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:04.0/0000:01:06.0/sound/card0 is busy: yes
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 973bc92532c3aa8b577497be5c6b36f2 as :1.157
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-bluetooth-policy.so': failure
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-bluetooth-discover.so': failure
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #7; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-gconf.so': success
D: [pulseaudio] module-gconf.c: Loading module 'module-native-protocol-tcp' with args 'auth-anonymous=1' due to GConf configuration.
I: [pulseaudio] module.c: Loaded "module-native-protocol-tcp" (index: #9; argument: "auth-anonymous=1").
D: [pulseaudio] module-gconf.c: Loading module 'module-esound-protocol-tcp' with args 'auth-anonymous=1' due to GConf configuration.
I: [pulseaudio] module.c: Loaded "module-esound-protocol-tcp" (index: #10; argument: "auth-anonymous=1").
D: [pulseaudio] module-gconf.c: Loading module 'module-zeroconf-publish' with args '' due to GConf configuration.
I: [pulseaudio] module.c: Loaded "module-zeroconf-publish" (index: #11; argument: "").
D: [pulseaudio] module-gconf.c: Loading module 'module-zeroconf-discover' with args '' due to GConf configuration.
D: [avahi-ml] module-zeroconf-publish.c: Started Avahi threaded mainloop
I: [pulseaudio] module.c: Loaded "module-zeroconf-discover" (index: #12; argument: "").
D: [pulseaudio] module-gconf.c: Loading module 'module-raop-discover' with args '' due to GConf configuration.
I: [pulseaudio] module.c: Loaded "module-raop-discover" (index: #13; argument: "").
D: [pulseaudio] module-gconf.c: Loading module 'module-rtp-recv' with args '' due to GConf configuration.
I: [pulseaudio] module.c: Loaded "module-rtp-recv" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #8; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     device.description = "Salida Boba"
I: [pulseaudio] sink.c:     device.class = "abstract"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Salida Boba"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #18; argument: "sink_name=auto_null sink_properties='device.description="Salida Boba"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #19; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #20; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-console-kit.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 2f6cf63750b68a252471f41c5c6b36b3 as :1.155
I: [pulseaudio] client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #21; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-10.0/modules/module-systemd-login.so': success
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #23; argument: "").
D: [pulseaudio] stream-interaction.c: Using role 'phone' as trigger role.
D: [pulseaudio] stream-interaction.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #24; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #25; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #26; argument: "").
E: [pulseaudio] main.c: D-Bus name org.PulseAudio1 already taken.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #26).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #26).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #25).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #25).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #24).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #24).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #23).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #23).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #22).
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #22).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #21).
D: [pulseaudio] module-console-kit.c: Removing session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #21).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #20).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #19).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #18).
D: [pulseaudio] module-always-sink.c: Autoloaded null-sink removed
D: [pulseaudio] module-rescue-streams.c: No sink inputs to move away.
D: [pulseaudio] module-rescue-streams.c: No source outputs to move away.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [null-sink] module-null-sink.c: Thread shutting down
I: [pulseaudio] sink.c: Freeing sink 0 "auto_null"
I: [pulseaudio] source.c: Freeing source 0 "auto_null.monitor"
I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #18).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #17).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #16).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #15).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-rtp-recv" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-rtp-recv" (index: #14).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-raop-discover" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-raop-discover" (index: #13).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-zeroconf-discover" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-zeroconf-discover" (index: #12).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-zeroconf-publish" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-zeroconf-publish" (index: #11).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-esound-protocol-tcp" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-tcp" (index: #10).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-native-protocol-tcp" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-tcp" (index: #9).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #8).
D: [pulseaudio] module-gconf.c: Unloading module #9
D: [pulseaudio] module-gconf.c: Unloading module #10
D: [pulseaudio] module-gconf.c: Unloading module #11
D: [pulseaudio] module-gconf.c: Unloading module #12
D: [pulseaudio] module-gconf.c: Unloading module #13
D: [pulseaudio] module-gconf.c: Unloading module #14
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #8).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #7).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #6).
I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #6).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 removed from object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry0
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] main.c: Daemon terminated.

$ pulseaudio 
E: [pulseaudio] module-protocol-stub.c: Failed to parse module arguments
E: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" 
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Fallo al intentar iniciar el demonio. 

load-module module-esound-protocol-unix

$ pulseaudio 
E: [avahi-ml] module-zeroconf-publish.c: Failed to send: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.hostname1 was not provided by any .service files